37 Results
3/8" Torrington #1819, 12-Roll 2-plane Tube & Rod Straightener, 125" hex or squaring rod, 1/12" diameter x 1" face, 635 FPM
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Torrington
Model: 1819
, CAPACITY: TUBE.0625" -.3125" WITH.040" WALL, ROD. 125" HEX OR SQUARE, ROLL SIZE. 1/12" DIA. x 1" FACE, SPEED. 159 - 635 FPM, ROLLS: 12-PLANE, ALL ROLLS DRIVEN, OPERATORS CONTROLS - PUSH BUTTONS, FOOT SWITCH, MACHINE TOOLED FOR 3/16" DIA., MOTOR DRIVE: 3 HP EST. AC MOTOR, V.S. PULLEY DRIVE, OVERALL DIMENSIONS: 40" LR ...more
3/4" Fastener Engineers Lewis #SB1000D, 2-plane powered straightener, 30 FPM
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Lewis
Model: SB1000D
3/4" FASTENER ENGINEER (FE) - LEWIS MODEL #SB1000D 2-PLANE POWERED, STRAIGHTENER; FOR COIL, ROD & BAR, MODEL. SB1000D, SERIAL. 597/7481, WIRE DIA. 1", SPEED. 30 FPM.
2" Bronx #BR4, 2-roll Bar Straightener
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bronx
Model: BR4
MACHINE # 12556, MANUFACTURER: THE BRONX ENGINEERING CO LTD, TYPE: BR 4, MACHINE # 2582, TYPE STRAIGHTENER: 2 ROLL, CAPACITY SOLIDS: 2-1/4" (57mm) - 0.3937" (10mm), DRIVE MOTORS: (2) 11Kw, 415 VOLTS, 730 RPM, 50 HZ.
2" Bronx #PBR4, 2-roll 2-motor Straightener, 100 FPM, L-R, 38" passline
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bronx
Model: PBR4
2" Nissei, 2-roll Bar Straightener
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Nissei
Get email updates for newly added Bar, Pipe and Tube Straighteners
4" -3/4" ID Tube Polisher/Manipulator, 3-Head, 20' L Capacity, Dust Collector & Kleenall Chip Filtration, 2-Speed
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
4" - 3/4" ID Tube Polisher with Tube Manipulator, 3 Head ID Tube Polisher, Tube Diameter: 4" - 3/4", Max Length: 20', NEW Tube Loading System with Manipulator, Auto Load, Digital Controller, 3 Polishing Heads, ID Rods, Blow Out Section, Dust Collector, Kleenall Chip Filtration System, 2 Speeds.
JUST ADDED!
4.5" Bronx Taylor Wilson, 6-roll rotary tube straightener, entry/exit tables, (2) 60 HP motors
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Taylor
6.5" Kieserling #Wrun 4, 7-Roll Tube & Bar Straightener, 28" L x 8" diameter large roll, 10" L x 9.5" diameter Small roll, 100 FPM
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Model: WRUN
MANUFACTURER - KIESERLING, MODEL - WRUN 4, CAPACITY - 1 9/16" - 6 " (165mm MAX), NUMBER OF ROLLS - 7, TWO LARGE ROLL DIMENSIONS - 28" LONG x 8" DIAMETER, FIVE SMALL ROLL DIMENSIONS - 10" LONG x 9.5" DIAMETER, STRAIGHTENING SPEED - 100 FPM, MOTOR - 37 Kw, 1000 RPM, DIMENSIONS - 148" L X 104" W X 88" H X 42,000 LBS..
7.5" Sutton 4KTC, 7-Roll Tube Straightener, 3-1-3 roll config., 68" center distance, 160 FPM
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sutton
7.5" (190mm) SUTTON 4KTC SEVEN ROLL TUBE STRAIGHTENER, MANUFACTURER - SUTTON, S/N - 1164, PRODUCT CAPABILITY - SEAMLESS TUBING AND CASING, TUBE RANGE - 3.5"-7.5" OD (88mm-190mm), STATUS - INSTALLED IN USA PLANT, ROLL CONFIGURATION - 3-1-3, DRIVEN ROLLS - 2 (BOTTOM), IDLE ROLLS - 4, PRESSURE ROLL - 1, MAXIMUM MACHINE ...more
8" x .041" Littell #308, 7-Roll Straightener, 2.25" diameter Rolls, 200 FPM, 2 HP, 1725 RPM, 440 V., 1963
Machinery Values Inc | Harrison, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Littell
Model: 308
Year: 1963
LITTELL MODEL″08 7-ROLL STRAIGHTENER*MODEL″08… S/N 71816-63… NEW 1963 Maximum width. 8"Straightening capacity. 8" x.041" mild steel 1" x.093" mild steelStraightening rolls. 7 (3 over 4)Dia. Of straightening rolls. 2.25" (on 2.75" centers)Dia. of entry pinch ...more
10" x .139" Press Room Equipment #PE=MB-10-1-2, Straightener, 7 Rolls, 66 FPM, 2 HP, 1999
Machinery Values Inc | Harrison, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Room Equipment
Model: PE=MB-10-1-2
Year: 1999
10" x.139" PRESS ROOM EQUIPMENT STRAIGHTENERMODEL PR-MD-10-I-2… S/N 1098-063… Year 1999 Capacity. 10" x.139"Minimum thickness.020"Number of straightening rolls. 7 (3 over 4)Diameter of straightening rolls. 2"Speed (variable). 22 - 66 FPMRoll Spacing. 2-1/4"Pass line ...more
12" x .050" Rapid-Air #SC-12, Straightener, 9 Rolls, 1-1/4" Pinch Roll, 1 HP, 115 V., 2001
Machinery Values Inc | Harrison, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Rapid-Air
Model: SC-12
Year: 2001
12" x.050" RAPID AIR STRAIGHTENER*MODEL SC12… S/N 83979… Year 2001 Max width of stock 12"Straightening rolls (9) @ 1 1/4"Pinch rolls (2) @ 1 1/4"Rated material width.015" -.050"Max line speed 0 - 825 in/minPass line height″5 1/2"Drive motor 1 hp Voltage 115V ...more
18" x .125" Perfecto #3.8-18-7, Straightener, 7 Rolls, 10 HP, 460 V., 60" Entrance Passline, 48" Exit Passline, 1985
Machinery Values Inc | Harrison, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Perfecto
Model: 3.8-18-7
Year: 1985
18" X.125" PERFECTO STRAIGHTENER*MODEL″.8-18-7… S/N SS-4520… NEW 1985 Maximum width. 18"Maximum thickness.125"Minimum thickness.040"Speed. 0 -″60 IPMNumber of straightening rolls. 7 (3 over 4)Dia. of straightening rolls.″.8"Dia. of pinch rolls ...more
Blaw-Knox, bar/profile straightener, 2 plane, 16 roll, motorized adjustment, 1130 RPM
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Blaw-Knox
Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener for up to, 4" Square, 7" Flat, 4" Hex, Main Motor 224 KW, 460 Volt, 1130 RPM, Individual Vertical Motorized Adjustment, Roll Centers Adjustable, with 10M Bundler Accumulator Table.
Bronx #6CR7, 6-roll rotary tube straightener
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bronx
Model: 6CR7
ARE SUBJECT TO VERIFICATION BY PURCHASER**.
Bronx #PBRV-6, tube/bar straightener, 2 roll, 18" x 26" rolls, 4" mild steel, 3" Stainless Steel
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bronx
Model: PBRV-6
Bronx Model PBRV 6, 2 Roll/Twin Motor Bar Straightener (2 x Sets Spare Rolls), Capacity 4" Dia Round MS, 3" Dia Hexagonal SS, Rolls 18" Dia x 26" Length, (2) 59.7Kw Motors, Spare Roll, Entry & Exit Protective Heavy Duty Tables, Transfer Conveyors, Spare Carriages & Tooling.
Bronx Taylor cross roll straightener
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bronx
BRONX TAYLOR-WILSON CROSS ROLL STRAIGHTENER, 5" ROLLS, 15 HP.
Bronx, cold straightener, 4-22m length, 60.3-177.8mm diameter, 3 pairs of rollers, 1983
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bronx
Year: 1983
Power: 15 / 150 KW at 150 / 1500 rpm, Operating voltage: 500 V / IT network, Target speed: 13.5 to 135 m/min, Workpiece, Wall thickness min./max.: 2.9 / 25.0 mm, Max. weight per meter: 95 kg/m, Tool, 3 pairs of rollers, Documentation available: YES, Operations:straightening.
Bronx, hot & cold straightener, 660mm diameter, 18m length
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bronx
Machine, Power: 2*315kW, Operating voltage: 400V, Documentation available: NO, Operations:straightening & rounding of pipes, Make, BRONX.
Demag, cold straightner, 3 pairs of rollers
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Demag
Power: Feed-in 630 Amp. / 2x 275 KW GS drives, Operating voltage: 500V / IT network, Available crane capacity: 8 tons., Tool, 3 pairs of rollers.
Demag Meer cold straightener, 6-16m length, 219-660mm diameter
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Demag
7 STRAIGHTENING ROLLS, 5 TOP IDLER, 2 BOTTOM POWERED, Min length:6m, Max length:16m, Min diameter:219mm, Max Diameter:660mm, Additional Information:Perfomance:, Operating voltage:, feed: 0,5m/s, Operations:straighten.
Holmann, cold straightener, 300mm diamter, 14.73m length, 1980
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Holmann
Year: 1980
Year of implementation:1980, Min length:7,5m, Max length:14,73m, Min diameter:100mmx100mm, Max Diameter:300mmx300mm, Max weight:2t, Additional Information:, Operations:PIPE STRAIGHTENING SQUARE, RECT & ROUND, DESCRAMBLING ENTRY CHAIN, ENTRY AND EXIT ROLLER CONVEYOR, EXIT CHAIN CONVEYOR TABLE, MFG.HOLMANN.
Kieserling #WRPH-230, 2-roll straightening machine, 1978
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Kerserling
Model: WRPH-230
Year: 1978
Manufacturer: KIESERLING, Model: WRPH 230, Year: 1978, Straightening range: O 30 230 mm, O 30 180 mm (high carbon steel: 800 - 1.000 N/mm2), Straightening speed: 0 20 m/min, Angular adjustment: 10 - 20, Straightening force: 450 ton (hydraulically cushioned) and 580 ton (not, cushioned), Max diameter of rolls: O 700 ...more
Kieserling Solingen, straightening machine for conical bars No. 92
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Kieserling
Machine: Straightening machine (smoothing roller) for continuous bars, Manufacturer: Kieserling Solingen, Modernized: No, Power grid: 500V,50Hz, IT grid, Workpiece, Conti rods of 26 meters, Data feed device:, Diameter: 60-160 mm, Max. rod length: 26,500 mm, Max. bar weight: 4,180 kg, Feed speed: 0.05-2.0m/min., Roll ...more
Kocks, cold straightener, 4-17.5m length, 38-127mm diameter, 2003
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Kocks
Year: 2003
Machine, ROT 180 / VIS 773086 / Geit, Power test block: 3 Ph. / 500 V / 18.5 KW Siemens, Slip ring system with 25 tracks, Probe plug-in LF / QF / WD / GEO, Pipe Data, Outer diameter: 21.3 to 182 mm, Wall thickness: 2.6 to 32 mm, Operational length: 5.1 to 25.6 m, Finished length for sump: 5.0 to 25.3 m, Length ...more
Mannesmann #KR-175, straightener
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Mannesmann
Model: KR-175
Meeco #12-12-TPVC, SIZE hd3, 12 roll 2 plane rotary bar straightener, 180 FPM
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Meeco
Model: 12-12-TPVC
MEECO MODEL HD3 12-12 TPVC TWO PLANE BAR & SHAPE STRAIGHTENER, BAR RANGE (STEEL C1018), HEX.1/2" TO 2-1/2", SQUARE.1/2" TO 2-1/2", FLAT.1" X 4", ANGLE.3-1/2" X 3-1/2" X 3/8", SPEED.180 FT/MIN, TOTAL NUMBER OF ROLLS. 24 (12 VERTICAL, 12 HORIZONTAL), 6 VERTICAL HEADS, MOTORIZED CENTER ADJUSTMENT, 6 IDLER ROLLS ...more
Meeco straightener bottom guide holder
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Meeco
Meeco, 2 roll bar straightener, machine incomplete
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Meeco
JUST ADDED!
Nargesa #MT-500A, industrial bar twisting & scolling machine
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Nargesa
Model: MT-500A
- SUBJECT TO CONFIRMATION BY THE PURCHASER.
Schumag #KZRP-3B, combined bar drawing line with inline polisher, 8-23mm
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Schumag
Model: KZRP-3B
CURRENT CONFIGURATION - 8MM - 23MM, LINE COMPONENTS:, (2) BOOM TILTABLE PAYOFFS ON CAROUSEL, COIL END OPENING MACHINE, HORIZONTAL PRE-STRAIGHTENER, VERTICAL PRE-STRAIGHTENER, PUSH POINTER, KZ-RP IIIB COMBINED DRAWING MACHINE, 500 HP BROWN BOVERI DC MOTOR (1981), VERTICAL ROLLER STRAIGHTENER, HORIZONTAL ROLLER ...more
Schumag #KZRP-IIIB, combined drawing line w/inline shotblast, polishing & chamfer
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Schumag
Model: KZRP-IIIB
Schumag IIIB Bar Combined Drawing Line, 19mm - 42mm (38mm Hex) x 25-Ton Pull x 315KW Capacity, including Schumag Double Rotary Uncoilers, Coil Opener, OCN Horizontal & Vertical Pre-Straightener, George Fischer 3-Wheel (25KW) Shot Blast Chamber, Schumag Push Pointer, Schumag Model IIIB, Twin Carriage Drawing ...more
Schumag / Casa Grande #Kzrp-IIBF, flat bar combined drawing line, double decoiler, entry bar manipulator
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Schumag
Model: KZRP-IIBF
Schumag/Casa Grande IIBF, Flat Bar Drawing Line, 12mm - 30mm x 12-Ton Pull Capacity, including Casa Grande Double Decoiler, Casa Grande Entry Bar Manipulator. Milling Type Pointer, Horizontal/Vertical Pre Straightening, Vogel & Schumann 4-Wheel (35KW) Shot Blast, Schumag IIBF Flat Bar Drawing Machine, Motor-169Kw ...more
Sir James Farmer Norton & Co, 2-roll horizontal bar straightener
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sir James Farmer Norton
Sir James Farmer Norton & Co 2-Roll Horizontal Bar Straightener, Roll Dimensions 9" Dia x 9" Length, Entry and Exit Feed Tables, Bottom Guide.
Model KR-420, cold straightener, 406.4mm diameter, 15.7m length, 1998
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Model: KR-420
Year: 1998
Machine, Feed: 1m/s, Workpiece, Min. outer diameter: 168.3 mm, Max. outer diameter: 412.5, Minimum length: 7.5m, Maximum length: 14.73 m, Max. weight: 3.5t, Documentation available: NO, Operations:Straightening, Make, KR 420, Year, 1998.
8 Roll Hydraulically Adjusted Sizing Turkshead
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
NUMBER OF ROLLS. 8.
14 Roll tube & bar 2 plane straightener
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
14 ROLL TUBE & BAR 2-PLANE STRAIGHTENER, PLANES 2 HORIZONTAL & VERTICAL, PLANE DIMENSIONS 14" X 40", SCREW ADJUSTMENT INDIVIDUAL, EACH BLOCK 4" X 4.75", DISC DIAMETER 4-1/4".
