22 Results
2" x 2" x 1/4" Buffalo #BR1/2, horizontal angle bending rolls, 5 HP, 33 variable FPM drum switch
Yoder Machinery Sales | Holland, OH
Category: Angle Bending Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Buffalo
Model: BR1/2
SERIAL. 37U20999, MODEL. BR1/2, CAPACITY ANGLE LEG OUT. 2" X 2" X 1/4", MINIMUM DIAMETER. 20", CAPACITY ANGLE LEG IN. 1-1/2" X 1-1/2" X 1/4", MINIMUM DIAMETER. 18", BEAMS ON FLANGE. 3" X 7-1/2" TO 24" MINIMUM DIAMETER, FLATS ON EDGE. 2" X 3/8" TO 24" MINIMUM DIAMETER, FLATS ON FLAT. 3" X 3/4" TO 20" MINIMUM DIAMETER ...more
2" x 2" x 1/4" Kling #0, angle roll, 7" roll diameter, 5 HP, 15 FPM, 2" x1/2" bars on edge, #71157
Yoder Machinery Sales | Holland, OH
Category: Angle Bending Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kling
SERIAL. 1737, MODEL. 0, CAPACITY ANGLE LEG OUT. 2" X 2" X 1/4", CAPACITY TEES. 2-X 1-1/2" X 1-1/4", CAPACITY BARS ON EDGE. 2" X 1/2", ROLLING SPEEDS VARIABLE. 15 FPM MAXIMUM, DIAMETER OF ROLLS. 7", MOTOR. 5 HORSEPOWER.
2" x 2" x 1/4" Roundo #SR-2, hydraulic horizontal angle bending roll, Leg In - Leg Out, 2006
Mohawk Machinery Inc | Cincinnati, OH
Category: Angle Bending Rolls
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Roundo
Model: SR-2
Year: 2006
2" x 2" x 1/4" ROUNDO HYDRAULIC HORIZONTAL ANGLE BENDING ROLL, Manufacturer ROUNDO Model SR-2 Condition Used Serial Number 06815 Stock Number 30285.
2" x 2" x 1/2" Buffalo #1/2, angle bending rolls, 5 HP, 33 variable FPM, 1018 RPM
Yoder Machinery Sales | Holland, OH
Category: Angle Bending Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Buffalo
Model: 1/2
SERIAL. 66W1192, MODEL. 1/2, CAPACITY ANGLE LEG OUT. 2" X 2" X 1/4", MINIMUM DIAMETER. 20", CAPACITY ANGLE LEG IN. 1-1/2" X 1-1/2" X 1/4", MINIMUM DIAMETER. 18", BEAMS ON FLANGE. 3" X 7-1/2" TO 24" MIN DIAMETER, FLATS ON EDGE. 2" X 3/8" TO 24" MIN DIAMETER, FLATS ON FLAT. 3" X 3/4" TO 20" MIN DIAMETER, ROUNDS. 1-1/2" ...more
3" x 3" x 3/8" Buffalo #1, angle bending rolls, 34 FPM, 10 HP, leg-in leg-out attachment
Yoder Machinery Sales | Holland, OH
Category: Angle Bending Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Buffalo
Model: 1
SERIAL 58W2031, MODEL #1, CAPACITY ANGLE LEG OUT. 3" X 3" X 3/8", MINIMUM DIAMETER. 24", CAPACITY ANGLE LEG IN. 2-1/2" X 2-1/2" X 3/8", MINIMUM DIAMETER. 30", BEAMS ON FLANGE. 5" X 12-1/4 LBS TO 40" MINIMUM DIAMETER, FLATS ON EDGE. 3" X 5/8" TO 36" MINIMUM DIAMETER, FLATS ON FLAT. 6" X 1" TO 24" MINIMUM DIAMETER ...more
Get email updates for newly added Angle Bending Rolls
3" x 3" x 3/8" Buffalo #1, Angle Rolls, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Angle Bending Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Buffalo
Model: 1
SERIAL. 61--8534, MODEL. #1, CAPACITY ANGLE LEG OUT. 3" X 3" X 3/8", MINIMUM INSIDE DIAMETER. 24", CAPACITY LEG IN. 2-1/2" X 2-1/2" X 3/8", MINIMUM INSIDE DIAMETER. 30", CAPACITY ROUNDS. 2", CAPACITY FLAT ON FLAT. 6" X 1" TO 24" MIN DIA, CAPACITY FLAT ON EDGE. 3" X 5/8" TO 36" MIN DIA, LEG IN LEG OUT ATTACHMENTS. YES ...more
3" x 3" x 3/8" Carell #305CN3.V, CNC hydraulic angle roll, tooling, 2016
Yoder Machinery Sales | Holland, OH
Category: Angle Bending Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Carell
Model: 305CN3.V
Year: 2016
MODEL. 305CN3.V, YEAR NEW 2016, lat bar on edge. 3" x 1/2", Flat bar on flat. 5" X 1", Square bar. 1-3/4", Round bar. 2", Angle leg-out. 3" X 3/8", Anqle leq-in. 2-1 /2" x 9/32", Square tube. 2-1/2" x 10 GA, Round tube. 3-1/2" x 14 GA, Round pipe schedule. 40: 2" to 2-1/2", T Sections leq-out-in-lateral. 3", C ...more
3" x 3" x 3/8" Ercolina #CE70H3, hydraulic, 2.6 HP, 70mm roll shaft diameter
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Angle Bending Rolls
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Ercolina
Model: CE70H3
(NEW) ERCOLINA ANGLE ROLL, MODEL: CE70H3, FACTORY, Bending Capacity, Pipe: 3" Schedule 40, Bending Capacity, Angle: 3" x 3" 3/8", Roll Shaft Diameter: 70 mm, Center Roll Positioning: Hydraulic, 16 Tons, Shaft Speed: 8 RPM, Universal Tooling (Included): 9-1/2" O.D., Number Of Programs: 8, Distance Between Shafts: 15" ...more
3.15" x 3.15" x .315" Tauring #Delta-60, hydraulic CNC angle & profile bending roll, 2007
Mohawk Machinery Inc | Cincinnati, OH
Category: Angle Bending Rolls
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Tauring
Model: DELTA-60
Year: 2007
3.15" x 3.15" x.315" TAURING HYDRAULIC CNC ANGLE, Manufacturer TAURING Model DELTA 60 Year 2007 Condition Used Serial Number 06OD-616 Stock Number 29605 Rolling Speed 7.4 RPM Shaft Working Length 6.3" Shaft Diameters 2.36" Weight, Approximately 2500 LBS.
JUST ADDED!
3.5" x 3.5" x 3/8" Kling #1/2-A, angle roll, powered guide roll adjustment, digital read out, 1 shot lube, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Angle Bending Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kling
Model: 1/2-A
SERIAL. 432341390641, MODEL. 1/2 - A, CAPACITY ANGLE LEG OUT. 3-1/2" X 3-1/2" X 3/8", MINIMUM DIAMETER. 30", CAPACITY ANGLE LEG IN. 2" X 2" X 3/8", MINIMUM DIAMETER. 30", CAPACITY ROUND BAR. 2-1/8" @ 22" DIAMETER, CAPACITY SQUARE BAR. 1-3/4" @ 22" DIAMETER, CAPACITY PIPE. 2-1/2" @ 24" DIAMETER, CAPACITY FLAT ON FLAT. ...more
3.5" x 3.5" x 3/8" Roundo #R4, hydraulic bending rolls, 3-roll drive, pendant Control, 10 HP, 1995
Yoder Machinery Sales | Holland, OH
Category: Angle Bending Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Roundo
Model: R4
Year: 1995
SERIAL. 955921, MODEL. R4, YEAR NEW. 1995, CAPACITY ANGLE LEG OUT. 3-1/2" X 3-1/2" X 3/8", CAPACITY ANGLES LEG IN. 3" X 3" X 3/8", SMALLEST ANGLES ROLLED. 1" X 1" X 1/8", CAPACITY FLAT ON FLAT. 1" X 7", CAPACITY FLAT ON EDGE. 1" X 3-1/2 @ 32 DIA., CAPACITY SQUARE BARS. 1-3/4", CAPACITY ROUND BARS. 2", CAPACITY PIPE. ...more
4" x 4" x 3/8" Akyapak #APK-101, 12.4dia. of dies, 3.93" shaft diameter, 16' rolling speed, 15 HP, 5800 lbs.
Worldwide Machine Tool | Lewis Center, OH
Category: Angle Bending Rolls
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Akyapak
Model: APK-101
4" x 4" x 5/8" Buffalo #2, angle rolls, variable speed drum switch, 20 HP, 35 FPM, #62282
Yoder Machinery Sales | Holland, OH
Category: Angle Bending Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Buffalo
Model: 2
MODEL. 2, ANGLES LEG OUT. 4" X 4" X 5/8", MINIMUM DIAMETER. 40", ANGLES LEG IN. 3-1/2" X 3-1/3" X 5/8", MINIMUM DIAMETER. 48", FLAT ON FLAT. 9" X 1-1/4", 30" DIAMETER, ROUNDS AND SQUARES. 2-3/4", 30" DIAMETER, SQUARES. 2-1/2", 30" DIAMETER, STANDARD PIPE. 3-1/2", BEAMS ON FLANGE. 8" X 18#, 60" DIAMETER, CHANNELS ...more
4" x 4" x 5/8" Buffalo #2HBR, angle roll, vari-speed forward/reverse, 20 HP, #66715
Yoder Machinery Sales | Holland, OH
Category: Angle Bending Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Buffalo
Model: 2HBP
MODEL. 2HBP, CAPACITY ANGLE LEG OUT. 4" X 4" X 5/8", CAPACITY ANGLES LEG IN. 3-1/2" X 3-1/2" X 5/8", MINIMUM DIAMETER LEG OUT. 40", MINIMUM DIAMETER LEG IN. 48", FLATS ON EDGE. 4" X 1" X 48" MINIMUM DIAMETER, FLATS ON FLATS. 9" X 1-1/4"X 30"MINIMUM, CAPACITY ROUNDS. 2-3/4" X 30" MINIMUM DIAMETER, CAPACITY SQUARES. ...more
5" DFK / Wallace angle bending roll, 20 HP
G-2000 Inc | Toledo, OH
Category: Angle Bending Rolls
Seller: G-2000 Inc
Location: Toledo, OH
Mfr: Dfk
MODEL.: 464, ROUND PIPE.: 5" X.250" SCHEDULE 40, ROUND PIPE DIAMEMETER.: 8" MAX, FLAT BAR.: 2" X 18", ROLL STUB ARBOR DIAMETER.: 6", ROLL DIAMETER.: 15", MAIN BENDING PINCH ROLLS.: 2, SIDE AJUSTBALE ROLLS.: 2, MANUAL ROLL ADJUSTMENT.: YES, SCREW, ROLLING SPEED.: 7-1/2 (30FPM), LEFT & LEFT HAND DIRECTION.: ...more
6" x 6" x 1/2" Buffalo #2-1/2, angle bending rolls, 30 HP motor
Chrisgo Equipment Co., Inc. | Milford, OH
Category: Angle Bending Rolls
Seller: Chrisgo Equipment Co., Inc.
Location: Milford, OH
Mfr: Buffalo
Model: 2-1/2
6" x 6" x 3/4" JMT #PBH240, hydraulic angle bending roll, 22" roll diameter, 8.7" shaft diameter, 23 FPM, digital read out, 2009
Yoder Brothers Machinery | Holland, OH
Category: Angle Bending Rolls
Seller: Yoder Brothers Machinery
Location: Holland, OH
Mfr: Jmt
Model: PBH240
Year: 2009
Weight35,000 LBS, MODEL. PBH240, YEAR NEW. 2009, ROLLING CAPACITIES:, ANGLE. 6" X 6" X 3/4", SQUARE SOLID. 4-3/8" X 4-3/8" X 52" ID, ROLL DIAMETER. 22", SHAFT DIAMETER. 8.7", VARIABLE SPEED. 0 TO 23 FPM, CONTROL STATION. YES, DIGITAL READ OUT. BOTTOM ROLLS (X & Y), MOTOR. 40 HP.
6" x 6" x 3/4" Roundo #RB-5, vertical / horizontal angle roll, 3.93" round bar, 3.54" x 3.54" square bar, 55" min diameter, 18.8" diameter of rolls
G-2000 Inc | Toledo, OH
Category: Angle Bending Rolls
Seller: G-2000 Inc
Location: Toledo, OH
Mfr: Roundo
Model: RB-5
MODEL.: RB-5, CAPACITIES:, ANGLE IRON (LEG OUT).: 6.25" X 6.25" X.78", ANGLE IRON (LEG IN).: 5.9" X 5.9" X.47", MIN DIAMETER.: 70", FLAT IRON (ON EDGE).: 5.9" X 1.57", FLAT IRON (ON FLAT).: 13.7" X 1.9", MIN DIAMETER.: 55", ROUND BAR.: 3.93", SQUARE BAR.: 3.54 X 3.54", ROUND PIPE.: SCHEDULE 40, 4.92", DIAMETER OF ...more
6" x 6" x 7/8" Buffalo #3, horizontal angle roll, hydraulic roll adj., 30 HP, tooling, 1967, #54120
Yoder Machinery Sales | Holland, OH
Category: Angle Bending Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Buffalo
Model: 3
Year: 1967
SERIAL. 67-6009, MODEL. 3, YEAR. 1967, CAPACITY LEG-OUT. 6" X 6" X 7/8", 60" MINIMUM DIAMETER, CAPACITY - LEG-IN. 5" X 5" X 7/8", 66" MINIMUM DIAMETER, BEAMS ON FLANGES. 12" X 30#, CHANNELS FLANGES OUT. 12" TO 30", CHANNELS FLANGES IN. 10" X 25", FLATS ON EDGE. 6" X 1-1/4", FLATS ON FLAT. 12" X 1-3/4", ROUNDS. 3-1/4" ...more
10" x 10" x .4" Tauring #Alpha-200CNCI, CNC Angle Bending Roll, 2015
G-2000 Inc | Toledo, OH
Category: Angle Bending Rolls
Seller: G-2000 Inc
Location: Toledo, OH
Mfr: Tauring
Model: ALPHA-200CNCI
Year: 2015
Tauring Alpha 200CNC Angle Bending Roll (2015) (Preliminary)Round Tube: 10.75" x 0.5" / Min. Radius: 87"Square Tube: 10" x 10" x.40" / Min. Radius: 80"Flat Bar (Hard Way): 10" x 2.3 / Min. Radius: 32"Angle (Leg Out): 7.8" x 7.8" x 0.78" / Min. Radius: 78"H Beam: IPE 330 / Min. Radius: 75" PLEASE NOTE - MINIMUM RADII ...more
Ercolina #CE50MR3, manual ring roller, 2001
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Angle Bending Rolls
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Ercolina
Model: CE50MR3
Year: 2001
Roundo AB Vertical Angle Bending Roll
AM Industrial | Brook Park, OH
Category: Angle Bending Rolls
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Roundo
Model: R4
Roundo AB R4 3.50" Vertical Angle Bending Roll - Used - AM22976, Model: R4, Machine No/Serial: 027571, Manufactured: 2002, Capacity Angle Leg Out: 3-1/2" x 3-1/2" x 3/8" Capacity Angles Leg In: 3" x 3" x 3/8" Smallest Angles Rolled: 1" x 1" x 1/8" Capacity Flat on Flat: 1" x 7" Capacity Flat on Edge: 1" x 3-1/2" @ 32" ...more
