Marvel 15" x 20" Vertical Tilt Frame Saw, Model E380PC3
Serial # E380-0106PC3
Asset # 13952
Capacity: Nominal 0° Cant 15″ x 20″, 15″ Round
Capacity: 45° 15″ x 14″, 14″ Round
Capacity: 60° 15″ x 9.25″, 9.25″ Round
Capacity: -45° 15″ x 13.25″, 13.25″ Round
Capacity: -60° 15″ x 8″, 8″ Round
Capacity: Nominal 3° Cant 14.5″ x 20″, 14.5″ Round
Capacity: 45° 14.5″ x 13.5″, 13.5″ Round
Capacity: 60° 14.5″ x 8.75″, 8.75″ Round
Capacity: -45° 14.5″ x 12.75″, 12.75″ Round
Capacity: -60° 14.5″ x 7.75″, 7.75″ Round
5 H.P. electric with sensor less vector control for smooth acceleration and full torque.
Infinitely variable: 60 to 400 fpm. Blade speed can be automatically set when material is selected.
For miter cutting up to 60° left and right of vertical. Electrically powered, chain driven, with encoder feedback and Marvel PC3 controller.
0° – 3° Canted Column
Adjustable 0° or 3° forward approach angle, for notching, or increased efficiency in cutting of structural materials. Must specify if 0° or straight column set up is desired as the machines are by default shipped from the factory in 3° Canted Column
Direct Force Sensing Electric Ball Screw Feed which combines more consistent feed force with greater control, 0 – 300 lbs, column travels on re-circulating linear ball ways. Feed pressure can be automatically set when material is selected.
Jammed Blade Protection
Automatically senses resistance as the column returns and stops to prevent blade damage.
16′ Long x 1.25″ Wide, .042″. One Welded-Edge Band is furnished with each machine as part of standard Start-up supplies.
Patent pending Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self-tensioning design.
Hydraulically controlled, 35,000 psi. max. Machine equipped with automatic blade break / blade stall shut off switch.
Upper Blade Guide Arm
Hydraulically positioned and locking, travels on linear guides, controlled through PC3 touch screen control.
Hydraulic, half stroking with 6.7″ High x 11.4″ Wide 60° faceplates. Optional variable vise pressure available.
Built-in Flood system, available with Drop Lubrication system, including chip pan with chip removal ramp.
One ball bearing roller on the entry side of the machine bed.
Washes away chips from hard-to-get-at places reducing clean-up time.
Automatic Bar Feed
The Automatic Bar Feed design features a 48″ stroke length with indexing speeds of up to 70 ft./min., and creep speeds of 33 in./min. The bar feed vise is electrically driven and combines precision double ball screws with preloaded re-circulating ball linear guides, resulting in positioning accuracy of ± .005″ per index. The vise itself is hydraulically clamped to prevent material slippage. Material can also be fed through the machine manually in both directions using the shuttle vise. Optional outboard and second machine vises are available.
Standard Left-to-Right Work Entry
Opposite Hand or Right-to-Left work entry available.
Main Drive: 5 H.P., Coolant Pump: 1/8 H.P., Hydraulic Pump: 2 H.P.
Saw is equipped with manual chip conveyor and outboard vise.
Preliminary Specifications – Subject to Verification