New! Taylor Te-10c Vibratory Net Weigh Open Mouth BaggerPackaging Machine For Filling Open Mouth Bags At A Rate Of 12 Bags Per Minute (depending On Bag Size)80-90 Psi Of Compressed Air Required. 115 Volt, 1 Phase, 60 Hz ControlsThe Te-10-c Is A Table-mounted Filling Device For 2 Ounces To 5 Lb. Weights. The Te-10-c Is ConstructedOf 1.5" Type 304 Stainless Steel Square Tubing With A Nema 4x, 304 Stainless Steel Control EnclosureAnd Nema 4 Electrical Components. All Contact Points Are Type 304 Stainless Steel With Tig Welds And Ra 42 Food Grade Acceptable Finish. The Base Te10c Includes A 2 Ft Cylindrical Hopper With Flow Control Sleeve, Dual Speed VibratoryFeeder And Choice Of Two Standard Weigh Pan Sizes For 1 And 5 Lb. Weighments. 139 In (0.08 Ft ) Weigh Pan Includes Replaceable Discharge Spout Tip And Hopper Can Be Removed Without The Use Of Tools For EasyAccess, Cleaning And Flexibility Of Use. Material Is Fed Via The Vibratory Feeder Into A Weigh Pan Directly Mounted To The Load Cell. TheProduct Will Flow At The Predetermined Vibratory Speed To Set Point One And Then Slow To TheSecond Predetermined Speed Until The Final Weight Is Reached. Once Final Weight Is Achieved, TheProduct Flow Will Stop. With A Bag Or Container In Place, A Switch Is Actuated To Discharge TheProduct Whereupon The Weigh Pan Is Refilled Automatically Foot Operated Dump Switch Replaces Standard Wrist Wand Switch. Actual Speed And Accuracies Are Dependent On Product Size And Bulk Density. Speeds From 10 To 20 Weighments Per Minute Are Achievable. Compressed Air Must Be Clean And Dry Operating Temperature Range Of 32f To 110fContact Us For Availability!
About the Dealer
J&M Industrial, Inc. buys, sells, consigns, and brokers quality surplus industrial process and packaging machinery for the chemical, plastics, and mineral processing industries. We offer outstanding values in quality used equipment and we export worldwide! Our large inventory can provide you with the equipment you need, when you need it and at a fair price. We offer leasing options and we take trade-ins. Our sales staff is experienced in helping you select the proper equipment for your application. J&M Industrial, Inc. is located on the Ohio River 40 minutes from Charleston and Parkersburg, WV; 2.5 hours from Columbus, Ohio and 3 hours from Pittsburgh, PA.