Advanced Search
Surplus Record logo

GEAR GENERATORS, For Bevel,Helical,Herringbone,Hypoid & Spiral Gears

Gleason #641, Hypoid spiral bevel gear generator, 10:1 ratio, -8 to 90 deg root angle

Request a Quote
More Photos & Detailed Specs
Share
Photo Unavailable

Image unavailable Image unavailable Image unavailable

General Specifications


Manufacturer: Gleason
Model: 641
Stock #: 22202
Price: Request a Price

Dealer Information


Charleston Annex Corporation
163 Associates Lane
Indian Trail, NC 28079
Youtube icon  
Contact: Mark Mannion
Tel: 704-821-7370
Fax: 704-821-7392
Email: markm@charlestonannex.com

Gold Level Dealer Since 2000
Website: www.charlestonannex.com

View our Equipment Listings

Detailed Product Description


Gleason 641 Hypoid Spiral Bevel Gear Generator
Serial No. 764602
Stock Number: 22202

Specification      
Extreme Ratio      10:1
Root Angle Range      -8 To 90 Deg
Gear Diameter - Max      16.000" (406.40MM)
Examples of Max. Pitch Dia.w/ 35" Gear Spiral Angle      
And Max Cutter Dia.At The Following Ratios : ( Using      
12" Cutters) 1 x 1      13.500" (342.90MM)
2 x 1      16.000" (406.40MM)
5 x 1      16.000" (406.40MM)
Max Radial Setting      6.983" (177.40MM)
Diametral Pitch - Coarsest      2.0 DP (12.70 MOD)
Full Depth - Max      1.000" (25.40MM)
Face Width - Max      2.600" (66.00MM)
Index Range      5-10 Inclusive
Work-Spindle Dia Of Taper Hole @ Large End      3-29/32 (99.22MM)
Taper Per Foot      39/64" (15.48MM)
Depth Of Taper      6" (152.40MM)
Dia Of Hole Through Spindle      3.0625" (77.79MM)
Cutter Dia (s) 2.75",3.75",4.5",6",7.5",9",10.5",12"      (100,125,160,200,250,300MM)
Cutter Speeds      15 - 250 RPM
Cycle Time Infinitely Variable From      4.5 Sec /Tooth - Min
WorkHead Settings :      
Offset Above Centre - Max      2.25" (57.15MM)
Offset Below Centre - Max      2.25" (57.15MM)
Machine Center To Nose Of Spindle - Max      14.50" (368.30MM)
      
Equipped With:
Hyd. Chucking Attachment * Controls For Completing, Roughing, & Finishing Plunge Feed Mechanism * Arrangement For Formate * Variable Rate-Of-Roll Arrangement * Helical Motion Feature * Double Roll Arrangement * Ratio Control Mechanism * One single Set-Up Of Change Gears * Full Complement Of Electrics (Motors & Controls) * Coolant System,Pump Tank, & Piping * Automatic Chip Separator , Including Automatic Chip Wiper System and Auger-Type Chip Conveyor