Advanced Search
Surplus Record logo

PLASTIC & RUBBER MACHINERY & EQUIPMENT
EXTRUDERS & EXTRUSION LINES

6" Davis Standard #6IN60TPIN, sheet extrusion line, 46" wide, 11.3:1 ratio, 500 HP, 6 Eurothern 2208 Temp. E Conrollers, 1998

Request a Quote
More Photos & Detailed Specs
Shipping Quote
Share
Photo Unavailable

Image unavailable Image unavailable Image unavailable Image unavailable Image unavailable

General Specifications


Dia.of Screw: 6.00"
Manufacturer: Davis
Model: 6IN60TPIN
Stock #: 14893
Price: Request a Price

Dealer Information


Blades Machinery Co Inc
750 Nicholas Blvd
Elk Grove Village, IL 60007-2509

Contact: Mike Olson
Tel: 847-439-2126
Fax: 847-439-0917
Email: molson@bladesmachinery.com

In the Surplus Record since 1991
Website: www.bladesmachinery.com

View our Equipment Listings

Detailed Product Description


USED DAVIS STANDARD 46″ WIDE SHEET LINE LAST USED ON PP SHEET AT A RATE OF 1800 LBS AN HR CONSISTING OF:

A – DAVIS STANDARD MODEL 6IN60TPIN 6″ 30:1 L/D EXTRUDER HAVING A SIX ZONE ELECTRICALLY HEATED, WATER COOLED BARREL (CLOSED LOOP) VENTED BARREL AND PLUGGED, 47" CENTERLINE HEIGHT. GEARBOX HAS A 11.3:1 REDUCTION RATIO AND IS DIRECT DRIVEN BY A 500 HP RELIANCE DC MOTOR WITH 550 KVA ISOLATION TRANSFORMER ALLOWING FOR A MAXIMUM SCREW SPEED OF 154 RPM. GEARBOX HAS A RATING OF 700 HP AT A SERVICE FACTOR OF 1.5. FEED THROAT HAS A 12" X 8" ENTRANCE. EXTRUDER SCREW IS A BARRIER TYPE. CONTROL PANEL WITH SIX EUROTHERM 2208 TEMPERATURE CONTROLLERS FOR THE EXTRUDER BARREL ZONES PLUS 9 MORE DISCRETE CONTROLLERS FOR THE DIE AND DOWNSTREAM ZONES. S/N X7505. MFD 1998

B – EXTEK MODEL HSC60 SCREEN CHANGER HAVING TWO NOMINAL 6" DIAMETER BREAKER PLATES. INCLUDES 2 HP HYDRAULIC POWER PACK.

C – XALOY MODEL SPD-300 MELT PUMP WITH 25 HP DRIVE SYSTEM AND CONTROLS.

D – EDI 44″ MODEL ULTRA-FLEX UHRC-100 FLEXIBLE LIP SHEET DIE HAVING A 45 DEGREE RESTRICTOR BAR. SET UP FOR FIVE ZONES OF TEMPERATURE CONTROL. WITH DECKELING PROVISION. INCLUDES DIE SUPPORT CART WITH CASTERS. 230 VOLT. S/N 98-20339. MANUFACTURED 1998.

E – DAVIS STANDARD MODEL UPSTACK46 COOL-KING AND POLISHING STAND HAVING THREE NOMINAL 24" DIAMETER CHROME PLATED ROLLS MOUNTED IN A VERTICAL ARRANGEMENT FOR UP-STACK OPERATION. HYDRAULICALLY ACTUATED CHROME ROLLS ARE EACH DRIVEN BY A 3 HP INVERTER DUTY MOTOR WITH ENCODER THRU SEW EURODRIVE 86.34:1 GEARBOXES WITH A 0-1750 RPM SPEED RANGE. INCLUDES PULL ROLL STAND WITH 46" X 8" DIAMETER ROLLS WITH 5 HP DRIVE SYSTEM AND 20′ IDLER CONVEYOR AND THREE ZONE WATER TEMPERATURE CONTROL SYSTEM WITH HEATERS, HEAT EXCHANGERS, AND 7.5 HP PUMPS.