1 / 6
Click to zoom in
1 / 6
For Sale by Heavy Wall Consulting
Surplus Record Dealer Since 2026
Location: Center Moriches, NY
Contact Jackson Barry
Phone Number: 562...> Show Phone Number 562-488-3494
Let the seller know you found their listing on Surplus Record!
$27,550 USD
Finance for as low as $559/mth 
Description
Vicon CNC Abrasive Waterjet Cutting System – Hypertherm HyPrecision 50 Pump – Heavy Duty Industrial – Used
Used Vicon heavy-duty CNC abrasive waterjet cutting system paired with a Hypertherm HyPrecision 50 high-pressure pump.
Tested and confirmed in good working condition.
- Pump: Hypertherm HyPrecision 50 – 50 HP intensifier
- Max Pressure: 60,000 PSI continuous
- Cutting Capacity: up to 4"+ depending on material
- Drive: Dual rack and pinion
- Cut Quality: Zero heat-affected zones, narrow kerf, near dross-free edge
- Materials: Steel, stainless, aluminum, exotic metals, stone, composites
Includes
Vicon CNC waterjet cutting table (approx. 5' x 10')
Dual rack and pinion gantry drive system
Hypertherm HyPrecision 50 intensifier pump (50 HP)
Associated plumbing and hoses (as shown)
Inquire Further with Heavy Wall Consulting!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Flow #Mach-500, waterjet, 8.6' x 20' table, 94,000 PSI, 50 HP pump, dual head, dual garnet, 5800 hours, 2017
Category: Waterjet Cutters
Seller: Lion Machinery LLC
Location: Chicago, IL
Mfr: Flow
Model: MACH-500
Year: 2017
2017 FLOW MACH 500 Waterjet Cutter available. Used condition with impressive 94,000 PSI pump output. Reliable choice for precision cutting needs. Ideal for industrial applications., X Axis Travel: 78", Y Axis Travel: 157", Z Axis Travel: 12", Air Supply: 100 PSI, Water Pressure: 94,000 PSI, Pump Power: 50 HP, Weight: ...more
JUST ADDED!
Flow #IFB-6012, Waterjet Cutter, 6' x 12' table, 87,000 psi. max. pressure, 50 HP HyperJet intensifier pump, 600 lb. abrasive hopper, 460-480 Volt, 2009
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Flow
Model: IFB-6012
Year: 2009
Used Flow IFB 6012 (2009) Waterjet for Sale. This unit has a 6′ by 12′ table and runs off a Flowmaster PC based control, with a 50 HP Hyperjet intensifier pump supporting a maximum cutting pressure of 87,000 PSI. Power requirement is 460-480/3/60. a 600 lb. abrasive hopper, bulk dump hopper, abrasive ...more
JUST ADDED!
Omax #80160, JetMachining Waterjet Cutter, 80" x 160" cutting area, 50 HP pump, solids removal system & A-Jet 200 liter abrasive delivery, 2012
Category: Waterjet Cutters
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Omax
Model: 80160
Year: 2012
SKU: 157029, Model: 80160, Year: 2012, Condition: Used, S/N: E511774, Dimensions: 144.00 (H) x 134.00 (W) x 288.00 (L) inches, Additional :, Purchased date: September 2012, Pump horsepower: 50 HP, Cutting Area: 80" x 160", Options Included: SRS (Solids Removal System), A-Jet 200 Liter Bulk Abrasive Delivery ...more
JUST ADDED!
A & V #A & V1206BA, Waterjet, 6' x 12' table, 50 HP, 2016
Category: Waterjet Cutters
Seller: Source Machinery Sales
Location: Fridley, MN
Mfr: A&v
Model: A&V1206BA
Year: 2016
A & V Waterjet, 6' x 12' Table, Max. Traverse: 195"/min, Control accuracy +/- 0.01mm, Cutting accuracy +/- 0.1mm, Aluminum alloy bridge, Balanced weight distribution, Intensifier Pump: 50 HP 55K PSI, Power: 480V / 50Hz / 3 Phase / 100 amps, Includes Industrial Personal Computer Control, Feeder & ...more
Flow #Mach-3B-4020B, Waterjet, 6.5'x13' table, 94,000 Psi, 50 HP, 2014
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Flow
Model: MACH-3B-4020B
Year: 2014
Make: Flow, Model: Mach 3B-4020b, Year: 2014, Machine Location: Upon Request, Table Size: 6.5’ X 13’, Z Axis Travel: 7″, Traverse/Cutting Speed: 500 IPM, Pump: 50 HP, 97k PSI, Flow PC Based Control, Dynamic Head, 94,000 PSI, 50 HP Pump, Water Only Head, Abrasive Hopper.
