1 / 5
Click to zoom in
1 / 5
For Sale by Frain Industries
Surplus Record Dealer Since 1991
Location: Carol Stream, IL
Contact Katie Frain
Phone Number: 630...> Show Phone Number 630-629-9900
Let the seller know you found their listing on Surplus Record!
Description
Urschel Model M6, stainless steel, belt fed, dicer, shredder and strip cutter designed for meat products and is capable of production rates from 500 to 4,500 lbs. per hour – depending on materials, application and machine configuration. Capable of strip cuts from 3/16" to 3" and cross cuts from 1/8" to 4". Equipped with 32" x 9" load area on feed belt and adjustable feed roll allowing for positive product feed at all thicknesses from 3/8" to 1", infeed height of 35", 16" long x 13" wide discharge chute with 14½" ground clearance. Mounted on stainless steel frame with castors. Change parts required to accommodate size range.
OAD: 120"L x 35"W x 51"H
Get Your Price from Frain Industries!
Buyers Who Viewed This Listing Also Viewed:
Urschel #M, Dicer/Strip Cutter, Stainless Steel, 1/8" x 3/16" to 1.5" x 3" cutting capacity
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Urschel
Model: M
Urschel M Dicer / Strip Cutter, Stainless Steel construction. Capable of cutting square or rectangular dices from 1/8" x 3/16" to 1-1/2" x 3", maximum thickness 1" (Various change parts available) Belt fed to dicing area with feed roll, circular knives, stripper plate, feed drum, crosscut knives. Complete with drive ...more
Urschel #MG, Comitrol Processor, 30 HP, 3530 RPM, 55 gallon capacity, 208-220/440 V.
Category: Industrial Food Cutters and Slicers
Seller: Genemco
Location: Hearne, TX
Mfr: Urschel
Model: MG
Urschel Comitrol Processor. Model: MG. S/N: 1081. The MG model is the predecessor to the 1700 Comitrol. Louis Allis Motor: 30 hp, 3530 rpm, 208-220/440 V. The Comitrol accommodates three types of reduction heads which enable a broad spectrum of product processing capabilities and is recommended for free-flowing dry ...more
Urschel #M, Dicer / Strip Cutter, Stainless Steel, Adjustable Cuts, Belt Feed, on frame, w/ drive & Control panel
Category: Industrial Food Cutters and Slicers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Urschel
Model: M
used-urschel m dicer / strip cutter, stainless steel construction. capable of cutting square or rectangular dices from 1/8" x 3/16" to 1-1/2" x 3", maximum thickness 1". belt fed to dicing area with feed roll, circular knives, stripper plate, feed drum, crosscut knives. complete with drive and control panel. mounted ...more
Urschel #RAA, Stainless Steel USDA dicer / cutter
Category: Industrial Food Cutters and Slicers
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Urschel
Model: RAA
, Urschel, Model RAA, Stainless steel USDA approved Dicer / Cutter. Capable of slices, dices, and strip cuts at speeds from 2500 to 5000 lbs. per hour. Unit is capable of cutting up to a 3" diameter log of product. Unit consists of slicing knife capable of 1/16" to 3/8" cuts, circular knife capable of 1/8" to 1" cuts ...more
Urschel Laboratories #L-A, dicer / strip cutter, 2 HP
Category: Industrial Food Cutters and Slicers
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Urschel
Model: L-A
Used 2HP Urschel Laboratories Slicer / Dicer / Strip Cutter - Model L-A, Serial No: 630, Stainless steel construction, mounted to an extended height portable frame., Unit will cut thawed products into uniform strips, cubes, or rectangular pieces., Product inlet hopper is 13" square, 80.5" above base., Drop-out ...more
