Stock # 20293
Price: $9,000 USD
1 / 4
Click to zoom in
1 / 4
For Sale by JM Industrial LLC
Surplus Record Dealer Since 1993
Location: Millwood, WV
Contact Sheldon Sharp
Phone Number: 304...> Show Phone Number 304-273-0795
Let the seller know you found their listing on Surplus Record!
$9,000 USD
Description
Used 15HP Stainless Steel Cheese Screw Extruder 12" Dia.
Auger and trough constructed with a sanitary finish, 12" X 56" long auger.
Extruder die is 12.25" with 7/16" perforations, side hinged with swing bolts.
Loading hopper has a 34" X 21" opening, elevated to 65" above base, hinged for clean-out.
Portable frame assembly with an enclosed size 2 motor starter/disconnect, and start/stop buttons.
15HP V-belt & shaft mount gear reducer.
Pre-wired for 240V, 60Hz, 3ph. AC.
Working speed of the auger is 42 RPM.
Weight = 1,223 LBS
Auger and trough constructed with a sanitary finish, 12" X 56" long auger.
Extruder die is 12.25" with 7/16" perforations, side hinged with swing bolts.
Loading hopper has a 34" X 21" opening, elevated to 65" above base, hinged for clean-out.
Portable frame assembly with an enclosed size 2 motor starter/disconnect, and start/stop buttons.
15HP V-belt & shaft mount gear reducer.
Pre-wired for 240V, 60Hz, 3ph. AC.
Working speed of the auger is 42 RPM.
Weight = 1,223 LBS
Inquire Further with JM Industrial LLC!
Buyers Who Viewed This Listing Also Viewed:
Pasta Mixer/Extruder, Stainless Steel, 3' x 3' x 24" deep hopper, 6" diameter Twil lead screw discharge, 10/3 HP
Category: Food Extruders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Pasta mixer/ extruder, stainless steel, complete with 3' x 3' x24" deep tapered bottom hopper with single wand agitator and 6" diameter twin lead screw discharge. Provisions for addition of die plate at screw discharge. Unit is mounted on frame, complete with 10 HP main motor drive through reducer for screw ...more
Margarine Extrusion & Pumping System, Stainless Steel, 4" diameter x 36" L horizontal feed screw, Waukesha pump, AllenBradley VFDs, 1 HP, 1700 RPM, 230/460 V., frame w/ casters
Category: Food Extruders
Seller: Aaron Equipment Co
Location: Schaumburg, IL
used- block shortening extrusion & pumping system, stainless steel. block ram feed hopper, approximate 17" x 13". approximate 4" diameter x 36" long horizontal twin feed screws. driven by 1hp, 3/60/230/460 volt, 1700 rpm gear motor. feeds into waukesha positive displacement pump, model 064. control panel with (2) ...more
Werner & Pfleiderer #ZSK-57-W50P, co-rotating twin screw 57mm Carbon steel compounding extruder
Category: Food Extruders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Werner & Pfleiderer
Model: ZSK-57-W50P
Werner & Pfleiderer, Co-rotating twin screw, 57mm carbon steel compounding extruder with optional high torque drive rated at up to 350 kg per hour – depending on materials and application. L to D ratio 34:1 (9) 7" long jacketed barrel sections for heating and cooling, 3.5" diameter feed area with ...more
Wenger #X-155, Extruder, (1) Screw Feeder w/Steam Injection, (1) Screw Feeder w/Motor
Category: Food Extruders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Wenger
Model: X-155
Used Wenger model X-155 extruder. (1) screw feeder with steam injection; (1) screw feeder with motor, no drive; (1) single-shaft pre-conditioner, cut-off knife. No control panel., WENGER X-155.
Bepex #GP300/900, High Pressure Roll Compactor/Extruder
Category: Food Extruders
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Bepex
Model: GP300/900
, Bepex High Pressure Roll Mill. Type GP300/900, S/N: 50815. Uses cooled rolls to apply immense pressure, often for fine grinding, compacting, or texturizing materials. One drum is smooth and the other is corrugated. Last used in pilot food plant, BEPEX GP300/900 High Pressure Roll Mill, TYPE. ROLL MILL.
