1 / 10
Click to zoom in
1 / 10
For Sale by MachineStation
Surplus Record Dealer Since 2022
Location: Lake Elsinore, CA
Contact Sales Dept.
Phone Number: 909...> Show Phone Number 909-919-9600
Let the seller know you found their listing on Surplus Record!
Description
Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Features:
ProtoTRAK RMX 3-Axis CNC Control
Programmable Spindle Speeds
Programmable Tapping
Table:
Table Size: 49.0" x 9.0"
Number of T-Slots: 3
T-Slot Width: 0.63"
T-Slot Spacing: 2.50"
Maximum Table Load: 1,320 lbs
Travels:
X-Axis Travel: 31.0"
Y-Axis Travel: 16.0"
Z-Axis Travel: 23.25"
Maximum Quill Travel: 5.0"
Spindle:
Spindle Taper: R8
Low-Speed Range: 40600 RPM
High-Speed Range: 3005,000 RPM
Spindle Motor: 3 HP
Quill Diameter: 3.375"
Spindle Center to Column Face: 18.5"
Maximum Spindle Nose to Table: 25.5"
Head Swivel: ±90 Degrees
Quill Feed Rates: 0.0015 / 0.003 / 0.006 IPR
Feedrate:
Rapid Traverse, X and Y Axes: 400 IPM
Rapid Traverse, Z Axis: 250 IPM
Machining Capacity:
Maximum Drilling Capacity: 1.0" Diameter
Maximum Tapping Capacity: 3/4"-10
Maximum Milling Capacity: 3 Cubic Inches per Minute
General:
Electrical Requirement: 208 Volts, 27 Amps, 3-Phase, 60 Hz
Approximate Overall Dimensions: 103" W x 94" D x 99" H
Approximate Net Weight: 3,300 lbs
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Features:
ProtoTRAK RMX 3-Axis CNC Control
Programmable Spindle Speeds
Programmable Tapping
Table:
Table Size: 49.0" x 9.0"
Number of T-Slots: 3
T-Slot Width: 0.63"
T-Slot Spacing: 2.50"
Maximum Table Load: 1,320 lbs
Travels:
X-Axis Travel: 31.0"
Y-Axis Travel: 16.0"
Z-Axis Travel: 23.25"
Maximum Quill Travel: 5.0"
Spindle:
Spindle Taper: R8
Low-Speed Range: 40600 RPM
High-Speed Range: 3005,000 RPM
Spindle Motor: 3 HP
Quill Diameter: 3.375"
Spindle Center to Column Face: 18.5"
Maximum Spindle Nose to Table: 25.5"
Head Swivel: ±90 Degrees
Quill Feed Rates: 0.0015 / 0.003 / 0.006 IPR
Feedrate:
Rapid Traverse, X and Y Axes: 400 IPM
Rapid Traverse, Z Axis: 250 IPM
Machining Capacity:
Maximum Drilling Capacity: 1.0" Diameter
Maximum Tapping Capacity: 3/4"-10
Maximum Milling Capacity: 3 Cubic Inches per Minute
General:
Electrical Requirement: 208 Volts, 27 Amps, 3-Phase, 60 Hz
Approximate Overall Dimensions: 103" W x 94" D x 99" H
Approximate Net Weight: 3,300 lbs
Get Your Price from MachineStation!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Southwestern Industries #Trak-DPM2, CNC vertical bed mill, 9" x49" table, 32" x16" x27" travel, 70-4200 RPM, 3 HP, ProtoTRAK SMX CNC
Category: CNC Vertical Bed Mills
Seller: Dominion Air & Machinery Co
Location: Roanoke, VA
Mfr: Southwestern Industries
Model: TRAK-DPM2
TRAK DPM Bed Mill with the ProtoTRAK SMX CNC, Stock #05407, S/N152DK863, TABLE & TRAVEL, Table Size: 49" × 9"T-Slots: 3 ×.63" Wide × 2.5" Pitch, X-Axis Travel: 32"Y-Axis Travel: 16"Z-Axis Travel: 27"Quill Diameter: 3-3/8"Maximum Quill Travel: 5", SPINDLE, Spindle Taper: R8Spindle Speed Range ...more
JUST ADDED!
Southwestern Industries #Trak-DPM-SX2, CNC bed type mill, 9" x49" tbl., 3 HP, 32" X, 16" Y, 23.5" Z, 70-4200 RPM, ProtoTrak SMX 3-Axis
Category: CNC Vertical Bed Mills
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Southwestern Industries
Model: TRAK-DPM-SX2
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, ProtoTRAK SMX 3-Axis CNC Control, Two-Speed ...more
JUST ADDED!
Southwestern Industries #Trak-DPMSX-2P, 3-Axis CNC bed mill, 9" x49" tbl., 3 HP, 31" X, 16" Y, 27" Z, R8, 40-5000 RPM, 2016
Category: CNC Vertical Bed Mills
Seller: Lee Stevens Machinery Inc.
Location: Whitmore Lake, MI
Mfr: Southwestern Industries
Model: TRAK-DPMSX-2P
Year: 2016
, Control System: ProtoTRAK SMX 3-Axis CNC Table Size: 9" x 49" Table Weight Capacity: 1,320 lbs X-Axis Travel: 31" Y-Axis Travel: 16" Z-Axis Travel (Head): 27" Quill Travel: 5" Quill Diameter: 3.937" Spindle Taper: R8 Spindle Motor: 3 HP Spindle Speed: 40 – 5,000 RPM (Programmable Electronic Variable Speed) ...more
Southwestern Industries #TRAK-DPM2, 3-Axis CNC vertical mill, 9" x49" tbl., 3 HP, 32" X, 16" Y, 27" Z, 4200 RPM, #40, 5" quill, ProtoTrak SMX
Category: CNC Vertical Bed Mills
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Southwestern Industries
Model: TRAK-DPM2
SOUTHWESTERN INDUSTRIES TRAK DPM2, a used CNC vertical/universal miller, available. Engineered for precision and versatility, ideal for various machining applications. Explore this reliable piece of equipment today., Table-W: 9 inches, Table-L: 49 inches, Travel-Long: 32 inches, Travel-Cross: 16 inches, Z-Axis Travel: ...more
Southwestern Trak #DPMSX2P, CNC vertical bed mill, 9" x49" table, 32" X, 16" Y, 27" Z, 3 HP, R8, Prototrak SMX, 2013
Category: CNC Vertical Bed Mills
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Southwestern Industries
Model: DPMSX2P
Year: 2013
2013 Southwestern Trak DPMSX2 3-Axis CNC Bed Mill #7318 #1, Table-W: 9, Table-L: 49, Travel-Long: 32, Travel-Cross: 16, Z-Axis Travel: 27", Max Quill Travel: 5", Max Weight of Workpiece: 1,320 Lbs., Power: 3 HP, Spindle Speed Max.: 4200 RPM, Spindle Taper: R8, Type of CNC Control Prototrak SMX, Dimensions: 72 x 64 x ...more
