SKF Deep Groove Ball Bearing 6010-2RS1/C3 50 x 80 x 16 mm

The SKF 6010-2RS1/C3 is a single-row deep groove ball bearing from the SKF Explorer series, identified by part number 6010-2RS1/C3 on the original box label. Dimensions per published SKF specifications are 50mm bore, 80mm outside diameter, and 16mm width. The 2RS1 designation indicates double-contact rubber seals on both sides, providing protection against contamination and retaining factory-applied grease for maintenance-free operation. The C3 suffix specifies greater-than-normal radial internal clearance, suited for applications involving elevated operating temperatures or higher rotational speeds where thermal expansion of the shaft or housing must be accommodated. SKF Explorer bearings are manufactured to meet ISO 14001 and ISO 9001 standards and are optimized for low noise, reduced vibration, and extended service life in industrial and mechanical applications. Common applications include electric motors, gearboxes, pumps, compressors, and conveyor systems. The bearing is listed in its original SKF retail box. Note: A visual discrepancy exists between the printed box label MPN and the physical size of the bearing shown in photographs. Buyers and operators should verify that the bearing dimensions match the labeled MPN prior to installation or resale.

Stock # 0426-01274