|Laser Source IPG||100,000 Hours|
|Maximum Output||4,000 Watts|
|Output Stability||+/- 2 Percent|
|Frequency||5 - 2,000 Hz|
|Laser Fiber Diameter||0.00393"|
|Laser Safety||Mechanical Safety Valve|
|Cooling Water Flow Rate||40 l/min|
|Maximum Worksheet Size||60" x 120"|
|Maximum Load Weight||2,200 Lbs.|
|Number of Controlled Axes||4 Axis (X,Y,W,Z)|
|X,Y,Z Axis with Servo Motor||1G|
|Pallet Changer Table & Cycle Time||2 pcs./ 45 Seconds|
|Steel||Oxygen (0.1 - 6 Bar)|
|Stainless Steel||Nitrogen (0.2 - 20 Bar)|
|Aluminum||Dry Air or Nitrogen (0.2 - 20 Bar)|
|Cutting Head Features|
|CAD/CAM Software||RANDAN/ LANTEK|
|CNC Control Unit||Intel Celeron 2 GHZ (Or Better)|
|Control of Operating System||Advance Reader System|
|Controller Axis||4 Axis: Y(Y,W),X, Z|
|Minimum Value of The Correction||0.001|
|Programming Version||Code Program System & ISO/EIA|
|Storage||Hard Disk: 80 GB; Program Memory Capacity 20GB|
|Lan Port||Lan Port (External Connection RJUS-10/100)|
|Display||19" TFT, Touch Screen|
|BIMO-FSC Manual Focus Set Up||.059"/6"|
|BIMO-FSC Automatic Focus Length Set Up||.059"/6", .07"/7.8"|
|BIMO-FSC Automatic Focus Length and Diameter Control||.04"-.12"/6", .062"-.16"/6"|
|Maximum Laser Power||6000 Watts|
|Maximum Beam Parameter Acceptance (Half Angle) of Laser Light Exiting Fiber||97 Percent Power Content Within 125 MRAD|
|Wave Length||1,025 - 1,080 NM|
|Omission||>97 Percent @ 1,064 NM|
|Diameter of The Fiber||.0000393" - .0393" (Standard)|
|Laser Light Cable Receiver||HIGHYAG LLK-HP (LLK-B), LLK-Auto (LLK-D), QBH|
|Diameter||0.029" - 0.11"|
|X & Y Setting||+/- 0.039"|
|Focus To Nozzle Position Range|
|BIMO-FSC With Motorized Z Focus Position||0.19" In Head Direction - 0.19" In Work Piece Direction|
|Distance Measuring Module FJB|
|Calibration Range||0.0039" - 0.787"|
|Output Signal||0 - 10 V (Distance)|
|Response Time||<1 msec|
|Electricity||DC 24V, 8 Amp, (BIMO-FSC With Motorized Z Focus Position and Diameter)|
|Pressure Of The Gas||Until 2.5 MPa|
|Gas||Active Inert Gas|
|Cooling||Flow Rate 2 l/min, Temperature 15-35 Degree Celsius|
|PLC/Field Bus System||Hard Wired|
|Cutting Head Dimensions|
|BIMO-FSC With Beam Bending Module 0 Degrees||5.3" x 4.5" x 17.3" (WxDxH)|
|BIMO-FSC With Beam Bending Module 90 Degrees||13.4" x 4.5" x 15.3" (WxDxH)|
|Weight (Machine)||34,170 Lbs.|
|CNC Control Unit|
|Filter For Exhaust Gases|
|QBH Cable Entry For Laser Beam|
|Extended Protective Glass For Ray Efficiency|
|Colimation Module With Automatic Adjustment Of Focus Position|
|Enhanced Safety Cartridge Cover|
|Developed With Ceramic Adapter|
|Crust Reduction Control|
|Head Retraction Method|
|Lateral Air Blowing System|
|3rd & 4th Super High-Pressure Gas Line, Adjustable via CNC|
|Training (4 Days)|
NUKON US is an American Based Company Dedicated to supporting the North American Market.
We believe that supporting a market takes serious effort and commitment. At NUKON US we are dedicated to that commitment by offering our partners a 24 month warranty, advanced operator training, annual maintenance training, a strong user network and the opportunity to be trained by our service techs to perform work on your machine. We believe that training our partners properly over time to not only operate but maintain their investment is a great way to insure our success. We also believe that by providing a strong user network we allow everyone to learn faster by providing a cooperative effort for growth and success in a very demanding market place.
We are certain, if given the opportunity; that every NUKON machine you buy will be a big part of your company’s future success.
We invite you to be a part of the NUKON family. Help us in our mission to reshape the future!
GENERAL FEATURES OF LASER CUTTING
Fiber laser cutting Machine is turning over a new leaf in the sheet metal processing technology. Nukon fiber laser cutting system is manufactured to meet the demands of fast, high-evolving industry. This machine is manufactured in a flexible design by NUKON’s engineers.
• The machine can be custom manufactured for dimensions.
• Resonator contains a modular structure (example: after a while you used 1 kw laser and you wanted to change it with 2kw laser. You just need to add new modules.)
• The laser beam is transmitted to the cutting head with a flexible fiber optic cable without quality degradation. By this means, an excellent cutting quality is obtained all over the cutting area.
• Easy to use, operator friendly cutting head.
• It is user and environment friendly with its low energy consumption. For instance, the total energy consumption for 2kw laser is 20kw.
• Mechanically robust and rigid body.
• Conveyor system for discharging slags and materials.
• Auto dual pallet exhange hydraulic table system.
• Includes lighting system.
|High process productivity|
Adjustment of focus position
Adjustment of focus diameter
Fiber Laser, major breakthrough in today's technology with outstanding reliability and high quality of light, has countless advantages.
RADAN CAD/ CAM SOFTWARE
Essential Profile seamlessly integrates the whole programming procces from part nesting, cut path profiling, sequencing, code generation and finally DNC connectivity to the machine controller.
A machine tool is only as efficient as the software driving it, so that is why we personally install every Radan post processor to ensure that it is commisioned to match your machine tool and controller. It is your production efficiency that itis controlling, and thatis why your software is important to us.
LANTEK EXPERT CUT