Manufacturer: Mazak
Model: QUICK-TURN-300X1250
Year: 2000
Swing: 23.6
Chuck: 12
Bar Capacity: 2.7
Centers: 49.2
Stock # TM5129
1 / 7
Click to zoom in
1 / 7
For Sale by Adams Machinery
Surplus Record Dealer Since 1924
Location: Libertyville, IL
Contact Mark Sonneborn
Phone Number: 847...> Show Phone Number 847-673-0556
Let the seller know you found their listing on Surplus Record!
Description
SPECIFICATIONS
EQUIPPED WITH
Equipped With: Mazak Mazatrol PC Fusion 640T CNC Control. 12" 3 Jaw Chuck. Programable Tailstock with Power Quill. Coolant System and Chip Conveyor. 12 Sation Turret. Turret Tooling.
Specifications:
Max Turning Dia 16.1"
Max Turing Length 48"
Max Bar Capacity 2.75"
Swing Over Bed 23.64"
Max Dist Between Center 49.2"
X Axis Travel 9.8"
Y Axis Travel 47"
Rapid Traverse X/Z 787 ipm
Spindle Nose A2-8
Spindle Bore 3.15"
Spindle Speed 30-3300 RPM
Spindle Motor 30 hp
Turret Capacity 12 Position
Tailstock Body Travel 46"
Tailstock Quill Travel 3.94"
Tailstock Quill Taper MT4
Approx Weight 11000 lbs
EQUIPPED WITH
Equipped With: Mazak Mazatrol PC Fusion 640T CNC Control. 12" 3 Jaw Chuck. Programable Tailstock with Power Quill. Coolant System and Chip Conveyor. 12 Sation Turret. Turret Tooling.
Specifications:
Max Turning Dia 16.1"
Max Turing Length 48"
Max Bar Capacity 2.75"
Swing Over Bed 23.64"
Max Dist Between Center 49.2"
X Axis Travel 9.8"
Y Axis Travel 47"
Rapid Traverse X/Z 787 ipm
Spindle Nose A2-8
Spindle Bore 3.15"
Spindle Speed 30-3300 RPM
Spindle Motor 30 hp
Turret Capacity 12 Position
Tailstock Body Travel 46"
Tailstock Quill Travel 3.94"
Tailstock Quill Taper MT4
Approx Weight 11000 lbs
Get Your Price from Adams Machinery!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Daewoo Doosan #Puma-280, CNC turning center, 24.8" swing, 12" chuck, 3-jaw, 2.9" bar, 16.53" dia., 25.9" lgth, A2-8, 12 turret, Fanuc 21i-TB, rigid tap, 2008
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Daewoo Doosan
Model: PUMA-280
Year: 2008
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 21i-TB Series CNC Control, Heavy Duty Box ...more
JUST ADDED!
DMG, Mori #NLX-2500SY/700, Celos Control, 23.2" swing, 12" chuck, tool setter, chip conveyor, sub spindle, 2020
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Dmg
Model: NLX-2500SY/700
Year: 2020
2020 DMG MORI NLX2500SY, Trough Hole: 4.1″ 111mm, Chuck Size: 12″, Spindle Speed: 2500 RPM, Spindle Motor: 30 HP, X Axis Travel: 10.2″, Z Axis Travel: 31.3″, Rapid Rate Z Axis: 1,181 IPM, Turret Tools: 12 Station, Rapid Rate X Axis: 1,181 IPM, Max Turning Dia: 18.1″, Max Turning Length: ...more
JUST ADDED!
DMG, Mori #NLX-2500SY, CNC turning center, 23.2" swing, 12" chuck, 4.1" bore, 2500 RPM, 30 HP, 12 turret, Celos Control, sub spindle, Y-Axis, LNS Quick Load Servo 3" barloader, 2020
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Dmg
Model: NLX-2500SY
Year: 2020
2020 DMG MORI NLX2500SY CNC Lathe in used condition s 12" chuck, 2500 RPM spindle, 30 HP motor, X/Z axis travel 10.2"/31.3", 12-station turret, and sub-spindle. 4.1" HOLE tool setter, chip conveyor, robot interface, and more., Trough Hole: 4.1" 111mm, Chuck Size: 12", Spindle Speed: 2500 RPM, Spindle Motor: 30 HP, X ...more
JUST ADDED!
Nakamura #SC-300II-LMSY, CNC multi-tasking turning center, 22" swing, 12" chuck, 3.5" bar, 51.5" centers, 13.7" dia., 43.31" lgth, Fanuc 0I-TF, Y-Axis, sub spindle, 2018
Category: CNC Lathes and Turning Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Nakamura
Model: SC-300II-LMSY
Year: 2018
2018 NAKAMURA SC300II LMSY CNC center with Y-axis and sub-spindle. Offers 22.05" swing, 13.7" turning diameter, and a 43.31" turning length. FANUC 0I-TF and more. Ideal for precise, complex machining. Only 2000 hours used., 2018 NAKAMURA SC300II LMSY, Swing Over Bed. 22.05", Turning Diameter. 13.7", Turning Length. ...more
JUST ADDED!
Milltronics #ML22, CNC Lathe, 23" swing, 40" machining length, 12" chuck, 3" bar, 24 HP, 2000 RPM, tailstock
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Milltronics
Model: ML22
CNC Lathe. Used condition. s include a 23" swing, 40" machining length, and 12" chuck size. Power: 24 hp, Max RPM: 2,000. Includes tailstock, no live tooling or sub spindle. 3" bar capacity., MILLTRONICS ML22, Swing. 23", Machining Length. 40", Chuck Size. 12", Bar Capacity. 3", Power. 24 hp, Max RPM. 2,000 RPM ...more
