Estimated monthly payment valid upon approved credit.
Description
SKU: 80784 Model: PX 6.4 Year: 2015 Condition: Used S/N: PX641766 Made In: UNITED STATES Dimensions: 54.00 (H) x 42.00 (W) x 207.00 (L) inches Additional Description: Applications:- - Threat Detection - Manifest & Declaration Verification - Contraband Detection - Theft Prevention - Regulatory Compliance/Inspection General:- Height: 1312 mm (51.7") Width: 862 mm (34") Length:- - Short Conveyor: 1700 mm (67") - Medium Conveyor: 2236 mm (88") - Long Conveyor: 3030 mm (119.3") Tunnel Opening: 640 mm (25.2") W x 430 mm (16.9") H Conveyor Height: 775 to 835 mm (30.5" to 32.9") Power Requirements: 100-240 VAC, 1-Ph, +/-10%, 50/60 Hz, 1.0 kVA max Conveyor Speed: 0.25 m per second +1/-2% @ 50/60 Hz Conveyor Capacity: 100 kg (220 lb) Scan Rate:>750 bags/hour (continuous mode), 400 bags/hour (2 level screening) X-Ray:- Voltage: 150 kV Duty Cycle: 100% Cooling: Sealed Oil Bath Beam Orientation: Vertically Upward Detector Configuration: 1152 photodiodes in L-shaped folded array configuration Imaging and Performance:- Resolution: 38 AWG standard, 40 AWG typical Penetration: 38 mm of steel standard, 40 mm typical Contrast Sensitivity: 4096 gray level stored Display Monitor: 19" LCD Monitor Penetration: 38 mm of steel standard, 42 mm typical Environmental:- Operating Temperature: 0 deg. C to 40 deg. C (32 deg. F to 104 deg. F) Storage Temperature: -20 deg. C to 50 deg. C (-4 deg. F to 122 deg. F) Humidity: 95% non-condensing Airborne Noise Level: <70dB(A) Accession Number 0612321-000
Inventory No. 0526-030-0002 Manufacturer Leica Model No. BLK2GO Name Mobile Mapping Handheld 3d Imaging Laser Scanner Arrival Date 05-29-2026 Dimensions L x W x H (inches) 18 x 18 x 12 Electrical 7.2V 5.5A Weight (lb.) 15 Category Electronics Condition Used Available Quantity 1 Serial No. 3630353 Make Year 2019 Item ...more
The Keyence IM-7010 Measuring Machine (2019) is a high-speed optical inspection system engineered for automated, precise dimensional measurement in modern manufacturing environments. Ideal for quality control applications, it quickly measures stamped parts, machined components, resin molds, springs, and gears with ...more
Used Leoni Engineering Products and Services machine vision system for foam part inspections using area-scan and line-scan cameras with Siemens controls architecture and Profinet PLC bus communications. Maximum part dimensions: 150mm; minimum part dimensions 10mm. Hardware includes: o (5) cameras o (1) Ultra-high ...more