Manufacturer: Hurco
Model: VM-1
Year: 2006
Automatic Tool Changer: 16
Longitudinal" X: 26.0
Cross" Y: 14.0
Vertical" Z: 18.0
RPM: 8000
Stock # 24044-P
Price: $14,500 USD
1 / 7
Click to zoom in
1 / 7
For Sale by Hildebrand Machinery Co Inc
Surplus Record Dealer Since 1987
Location: York, PA
Contact Dave Hildebrand
Phone Number: 717...> Show Phone Number 717-846-2600
Let the seller know you found their listing on Surplus Record!
$14,500 USD
Finance for as low as $294/mth 
Description
HURCO VERTICAL MACHINING CENTER
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $14,500.00
HMC Stock # 24044-P
Machine Serial No.: VM1-06031036BHA
Machine Model No.: VM1
New Date: 2006
Table Size: 29" Long x 14" Wide
Table Capacity: 750 Lbs.
X-Axis Travel: 26"
Y-Axis Travel: 14"
Z-Axis Travel: 18"
Spindle Speed: 8,000 RPM
Spindle Motor: 10 HP
Tool Capacity (ATC): 16
Rapid Traverse, X-Axis: 750 in/min.
Cutting Feed Rate: 600 in/min.
EQUIPPED WITH:
Ulti Pockets
Chip Auger
Coolant System
USB/Ethernet
Floppy Drive
Ramp/Helical Entry
Advanced Velocity Control
Graphics
Extended HDD
Extended Memory
10 HP Motor, Wired 3 Phase, 60 Hz, 220 Volts
Machine Dimensions: 75" LR x 65" FB x 98" High
Approx. Machine Weight: 6,500 Lbs.
Inquire Further with Hildebrand Machinery Co Inc!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Hurco #VM-1, 25.9" X, 14.1" Y, 18" Z, 8,000 RPM, 24 automatic tool changer, Cat 40, Hurco Max CNC, 2006
Category: Vertical CNC Machining Centers
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Hurco
Model: VM-1
Year: 2006
Used Hurco VM-1 (2006) CNC Vertical Machining Center for Sale. This pre-owned Hurco CNC vertical mill is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Hurco Vertical Machining Center, please feel free to contact us. You may Activate ...more
Hurco #VM-1, CNC vertical machining center, 16 automatic tool changer, 26" X, 14" Y, 18" Z, 8000 RPM, 10 HP,chip auger,coolant system, 2006
Category: Vertical CNC Machining Centers
Seller: Clark Machinery Sales LLC
Location: Hunt Valley, MD
Mfr: Hurco
Model: VM-1
Year: 2006
2006 HURCO VM1, TABLE LENGTH. 29", TABLE WIDTH. 14", TABLE CAPACITY. 750 lb, X-AXIS TRAVEL. 26", Y-AXIS TRAVEL. 14", Z-AXIS TRAVEL. 18", SPINDLE SPEED. 8,000 RPM, SPINDLE MOTOR. 10 hp, TOOL CAPACITY (ATC). 16, RAPID TRAVERSE - X AXIS. 750 in/min., CUTTING FEEDRATE. 600 ipm, APPROX MACHINE WEIGHT. 6,500 lb, APPROX ...more
Hurco #VM-1, 30" x14"table, 8000 RPM, #40 taper, 16 side mount automatic tool changer,Hurco Max CNC, 2007
Category: Vertical CNC Machining Centers
Seller: Sterling Machinery Ventures
Location: Commerce Twp., MI
Mfr: Hurco
Model: VM-1
Year: 2007
JUST ADDED!
Hurco #VM1, Vertical CNC Machining Center, 26" X, 14" Y, 18" Z, 29" x 14" table, 10 HP, 8000 RPM, 16 automatic tool changer, CAT 40, Hurco control, 2008
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Hurco
Model: VM1
Year: 2008
Used 2008 HURCO VM1 Vertical Machining Center, 26"x14"x18" travel, 10 hp, 8,000 RPM, CAT-40 taper, 16 ATC, 3-axis., 2008 HURCO VM1, X. 26", Y. 14", Z. 18", Power. 10 hp, RPM. 8,000 RPM, # ATC. 16, Taper. CAT-40, Table-W. 14", Table-L. 29", # Axis. 3, Control. CNC (HURCO), Includes miscellaneous tooling.
Sharp #SV-2414 A-F, 16 automatic tool changer, 24" X, 14" Y, 18" Z, 8000 RPM, #40, Fanuc Oi-MF, 27.6"x13.8"tbl., rigid tap, 2020
Category: Vertical CNC Machining Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Sharp
Model: SV-2414
Year: 2020
Sharp SV-2414 A-F CNC Vertical Machining Center - New 2020!, Sharp SV-2414 A-F CNC Vertical Machining Center, New: 2020, X Axis Travel: 24, Y Axis Travel: 14, Z Axis Travel: 18, Spindle Nose to Table: 2.8 - 20.9, Spindle Center to Column: 16.3, Table Area: 27.6 X 13.8, Max. Workpiece Weight: 770 LBS, T-Slot (Number x ...more
