1 / 5
Click to zoom in
1 / 5
For Sale by Toolquip Inc
Surplus Record Dealer Since 2025
Location: Lebanon, OH
Contact Daniela Weaver
Phone Number: 513...> Show Phone Number 513-450-6223
Let the seller know you found their listing on Surplus Record!
Description
Used CNC Lathe. Key features: 16" swing, 340.4 mm machining length, 6" chuck size, 1.7" bar capacity, 15 HP, and 6000 RPM max. Includes tailstock.
Chuck Size: 6 inches
Swing Over Bed: 15.94 inches
Max Cutting Diameter: 12.4 inches
Max Cutting Length: 13.4 inches
Distance Between Centers: 15.8 inches
X-Axis Travel: 7 inches
Z-Axis Travel: 14 inches
Spindle Motor: 17.5 HP
Spindle Speed: 6,000 RPM
Bar Capacity: 1.77 inches
Turret: 12 Station
Machine Weight: 7,000 lbs.
Voltage: 208240 VAC (3-phase, 60 Hz)
Frequency: 60 Hz
Power Supply: 3-phase, 3-wire (Y or configuration)
Current Draw: Approximately 1520 amps per phase (exact load depends on spindle and turret operation)
Chuck Size: 6 inches
Swing Over Bed: 15.94 inches
Max Cutting Diameter: 12.4 inches
Max Cutting Length: 13.4 inches
Distance Between Centers: 15.8 inches
X-Axis Travel: 7 inches
Z-Axis Travel: 14 inches
Spindle Motor: 17.5 HP
Spindle Speed: 6,000 RPM
Bar Capacity: 1.77 inches
Turret: 12 Station
Machine Weight: 7,000 lbs.
Voltage: 208240 VAC (3-phase, 60 Hz)
Frequency: 60 Hz
Power Supply: 3-phase, 3-wire (Y or configuration)
Current Draw: Approximately 1520 amps per phase (exact load depends on spindle and turret operation)
Get Your Price from Toolquip Inc!
Buyers Who Viewed This Listing Also Viewed:
Hurco #TM-6, 15.9" swing, 6" chuck, 1.7" bar, barely used, alot of tooling, 2007
Category: CNC Lathes and Turning Centers
Seller: Sterling Machinery Ventures
Location: Commerce Twp., MI
Mfr: Hurco
Model: TM-6
Year: 2007
HURCO TM6 CNC TURNING CENTER, NEW 2007, LOADS OF TOOLING, EXCELLET CONDITION, LOOKS BARELY USED, Serial Number 01003017AAA, CATALOG :, Chuck 6", Swing Over Bed 15.94", Swing Over Cross Slide 9.4", Max Cutting Diameter 12.4", Max Cutting Length 13.4", Distance Between Centers 15.8", X-Axis ...more
JUST ADDED!
Haas #SL-10T, CNC Lathe, 16.2" swing, 16.5" machining length, 11" turning diameter, 6" chuck, 1.7" bar, 15 HP, 6000 RPM, 2007
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: SL-10T
Year: 2007
CNC Lathe, used. s 16.25" swing, 16.5" machining length, and 6.5" chuck. Includes 2 axes, 1.75" bar capacity, 15 hp power, and tailstock. Max RPM 6,000, turning diameter 11"., 2007 HAAS SL-10T, Swing. 16.25", Machining Length. 16.5", # Axis. 2, Chuck Size. 6.5", Bar Capacity. 1.75", Power. 15 hp, Max RPM. 6,000 RPM ...more
Sharp #ST-10, CNC lathe, Fanuc 0iTD, 15" swing, 6" chuck, 1.7" bar, 13" machining length, 8" turning diameter, 2007
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Sharp
Model: ST-10
Year: 2007
2007 SHARP ST-10, Swing. 15", Machining Length. 13", Max. Turning Diameter. 8", Chuck Size. 6", Bar Capacity. 1.77", Power. 15 hp, Max RPM. 6,000 RPM, Tailstock. Yes, Fanuc Series Oi-TD CNC Control, Chip Conveyor.
JUST ADDED!
DMG, Mori-Seiki #NT1000/WZM, multi-axis CNC turning center, 14.5" swing, 6" chuck, 3-jaw, 2" bar, 10 turret, Y-Axis, rigid tap, 2010
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Dmg
Model: NT1000/WZM
Year: 2010
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Mori Seiki MSX-711IV Series CNC Control, Rigid ...more
JUST ADDED!
Haas #SL-10, CNC Turning Center, 16.2" swing, 1.8" bar, 12 station turret, 6.25" x 14" travels, 15 HP
Category: CNC Lathes and Turning Centers
Seller: Machinesused.com
Location: Minneapolis, MN
Mfr: Haas
Model: SL-10
Lot 40: Haas SL-10 CNC Turning Center, Haas Coldfire CNC Control, Collet Chuck, Tool Setter, Chip Conveyor, Electrics:, 208-230 Volt, 3 Phase, Main Unit Approx Weight: 5500.00 lbs, Main Unit Dimensions (in inches): Length: 127.00" Width: 55.00" Height: 69.00", Control: Haas Coldfire CNC, Max Swing Over Bed: 16.25" ...more
