Hans Laser #Sailfish-3015EX, fiber laser cutting system, 3000 watt, 5' x 10', IPG, 2021

Estimated monthly payment valid upon approved credit.

Request Formal Quote

Manufacturer: Han's Laser
Model: Sailfish 3015EX
Type: CNC fiber laser cutting system
Year: 2021
Machine serial: SG2021085
Laser power: 3000 watt
Laser source: IPG YLR-3000
Source serial: 21055028
Source built: June 2021, IPG Laser GmbH, Germany
Table size: 5' x 10' (1500 x 3000 mm)
Tables: dual shuttle pallets, pneumatic exchange
CNC control: Friendess CypCut 6.3.903.1
Height control: Friendess BCS100
Voltage: 400-480 VAC, 3 phase, 50/60 Hz
Source rating: 9000 VA
Assist gas: nitrogen, oxygen or air
Beam-on hours: 3320
Powered hours: 15192
Duty cycle: 21.9 percent
Condition: Used, good working order
Location: Shrewsbury, Massachusetts

VERIFIED HOURS

The hour figures above are not estimates. They were decoded from the IPG source's own service log, exported directly from the laser. The raw log file is supplied with a SHA-256 hash, so a buyer can send the identical file to IPG and have the numbers confirmed by the manufacturer rather than by the seller. A written condition report documenting the method is included with this listing. Figures are lifetime totals covering the machine's whole service life since manufacture in 2021.

INCLUDED IN THE SALE

Cutting machine with dual shuttle tables. IPG 3000 watt fiber source. Independent water chiller. Electrical cabinet air conditioner. Voltage transformer. Voltage regulator. Air compressor. Fume extractor and dust collector. CCTV camera and monitor. Industrial PC with CypCut licence. Cutting parameter library as configured in production.

OWNERSHIP

Purchased by the present owner from Han's Laser Corp (USA) in June 2024 under a signed quotation, commissioned and trained by the manufacturer. Single owner since. One production facility, never relocated. Original quotation, manufacturer invoices and payment records all available.

CONDITION

Good working order. Ran in production until taken out of service in February 2026. Powers up, communicates on all control buses, no active faults. Inspection and a live cutting demonstration are welcome by appointment.

Disclosed: the source log records a lifetime maximum case temperature of 72.30 C against a 72.20 C over-temperature threshold, so the source has tripped thermal protection at least once in its life. Case temperature at last inspection was 32 C with no fault active. The alarm history sits in the same log file supplied to the buyer.

REFERENCE VALUATION

In September 2026 Han's Laser Corp (USA) confirmed in writing that the contractual trade-in value of this machine under the original purchase agreement is USD 60,000, subject to inspection. Correspondence available on request. The asking price is set independently of that figure.

TERMS

As-is, where-is, Shrewsbury MA. Ground-level access. Rigging, loading and transport at the buyer's cost. Payment by wire transfer, title passes on cleared funds. No seller warranty. Full documentation package released to serious enquiries.