Manufacturer: Haas
Model: GR-510
Year: 2011
Automatic Tool Changer: 20
Longitudinal: 121.0
Cross: 61.0
Vertical: 11.0
Stock # 112996
1 / 9
Click to zoom in
1 / 9
For Sale by MachineStation
Surplus Record Dealer Since 2022
Location: Lake Elsinore, CA
Contact Sales Dept.
Phone Number: 909...> Show Phone Number 909-919-9600
Let the seller know you found their listing on Surplus Record!
Description
Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Replacement Cost Over $220k with Similar Options
Features:
Haas CNC Control
Remote Jog Handle
Coolant System
Travels:
X-Axis: 121"
Y-Axis: 61"
Z-Axis: 11"
Spindle Nose to Table (Min.- Max.): 2.5" 13.5"
Feed Rates:
Cutting Feed Rates: 800 Inch per Minute
X Axis Rapid Traverse Rates: 800 Inch Per Minute
Y Axis Rapid Traverse Rates: 2100 Inch Per Minute
Z Axis Rapid Traverse Rates: 1100 Inch Per Minute
Table:
Length: 122"
Width: 53"
Max Weight on Table: 6,000 lbs
Between Columns: 62"
Spindle:
Taper Size: 40
Speed Range: 10,000 RPM
Spindle Power: 15 HP
Automatic Tool Changer:
Capacity: 20 Tools
Max Tool Weight: 12 lbs
Max Tool Dia: 3.5"
General:
Air Required: 100 psi, 4 scfm
Power: 220v / 66FLA / 3-Phase
Overall Dimensions: 206" x 111" x 108" High
Weight: 19,400 lbs
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Replacement Cost Over $220k with Similar Options
Features:
Haas CNC Control
Remote Jog Handle
Coolant System
Travels:
X-Axis: 121"
Y-Axis: 61"
Z-Axis: 11"
Spindle Nose to Table (Min.- Max.): 2.5" 13.5"
Feed Rates:
Cutting Feed Rates: 800 Inch per Minute
X Axis Rapid Traverse Rates: 800 Inch Per Minute
Y Axis Rapid Traverse Rates: 2100 Inch Per Minute
Z Axis Rapid Traverse Rates: 1100 Inch Per Minute
Table:
Length: 122"
Width: 53"
Max Weight on Table: 6,000 lbs
Between Columns: 62"
Spindle:
Taper Size: 40
Speed Range: 10,000 RPM
Spindle Power: 15 HP
Automatic Tool Changer:
Capacity: 20 Tools
Max Tool Weight: 12 lbs
Max Tool Dia: 3.5"
General:
Air Required: 100 psi, 4 scfm
Power: 220v / 66FLA / 3-Phase
Overall Dimensions: 206" x 111" x 108" High
Weight: 19,400 lbs
Get Your Price from MachineStation!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Haas #GR-510, Gantry Machining Center, 121" X Travel, 61" Y Travel, 11" Z, 122" x 53" table, 15 HP, 10,000 RPM, CAT 40, 10 automatic tool changer, WIPS, 2023
Category: Gantry Type Machining Center
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: GR-510
Year: 2023
Used Gantry Machining Center. Featuring a 53"x122" table, 121"x61"x11" axis travel, and 10,000 RPM spindle. WIPS, high-speed machining., Table Width 53", Table Length 122", X-Axis Travel 121", Y-Axis Travel 61", Z-Axis Travel 11", Spindle Speed 10,000 RPM, Spindle Motor 15 HP, Spindle Taper CAT 40, Tool Changer 10 ATC.
JUST ADDED!
Haas #GR-510, CNC router, 121" X, 61" Y, 11" Z, 10000 RPM, 15 HP, CT40, air blast, light curtain, 2012
Category: CNC Routers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: GR-510
Year: 2012
Haas GR510 CNC Router, X-Axis Travel: 121″, Y-Axis Travel: 61″, Z-Axis Travel: 11″, Spindle Speed: 10,000 rpm, Spindle Motor: 15 hp, Taper: CT40, Spindle Nose to Table: 2.5″ – 13.5″, Max Torque: 48 ft lb @ 1,500 rpm, Drive System: Direct speed, belt drive, Max Table Load (evenly ...more
Haas #GR-510, CNC gantry mill, 121" X Travel, 61" Y Travel, 11" Z, 15000 RPM, 10 automatic tool changer, CT40, rigid tapping, 2020]
Category: Gantry Type Machining Center
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Haas
Model: GR-510
Year: 2020
Stock #: 151260008, Location: NC, Brand: Haas, Model: GR510, Year: 2020, Skidding Fee: Not Available, Loading Fee: Rigging Required, X Axis Travel: 121", Y Axis Travel: 61", Z Axis Travel: 11", Max Spindle RPM: 15,000, Spindle Motor: 15 HP, Spindle Taper: CT40, Tool Change Capacity: 10, Haas Control ...more
Haas #GR-510, Gantry Router, 121" x61" x11" travel, 15000 RPM, 15 HP, 62" between housing, 10 tool, 5' x10' Table, HSM, Rigid Tapping, 2020
Category: Gantry Type Machining Center
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: GR-510
Year: 2020
Make: Haas, Model: GR-510, Year: 2020, Machine Location: Upon Request, X-Axis Travel: 121″, Y-Axis Travel: 61″, Z-Axis Travel: 11″, Spindle Speed: 15,000 rpm, Motor ower: 15 hp, Taper: CT40, Spindle Nose to Table: 2.5″ – 13.5″, Max Torque: 48 ft‑lb @ 1,500 rpm, Drive System: ...more
Haas #GR-510, CNC gantry miller, 20 automatic tool changer, 121" X Travel, 61" Y Travel, 11" Z, 8100 RPM, #40, 20 HP, 122" x 53" table, 2005
Category: Gantry Type Machining Center
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: GR-510
Year: 2005
2018 Haas GR510 Gantry Router, 121" x 61" x 11", 20HP, 8100 RPM, CAT 40, 122" x 53" Table, Haas GR510 CNC Gantry Router, New: 2005, Table Size: 122" x 53", Travels:, X-Axis: 121", Y-Axis: 61", Z-Axis: 11", Max Table Weight: 6000 Lbs, Spindle Motor: 20 HP, Spindle Speed: 8100 RPM, Spindle Taper: CAT 40, Haas CNC ...more
