GROB Systems, automated cnc machining li, G500 & G520 horizontal machining centers, overhead gantry systems, conveyor, Siemens 840D CNC

This line was almost entirely manufactured by GROB Systems Inc.
(Bluffton, OH). The line is fully automated with all overhead gantry’s.
It consists of 11 – G500 single spindle HMC’s and 10 – G520 twin spindle HMC’s.

This flow is from East to West

OP 10A GROB G520 twin spindle HMC (2013) all have Siemens 840D CNC controls.
OP 20A Same
OP 30A GROB G500 single spindle HMC
OP 40A GROB G520 HMC
OP 45A GROB Gantry
OP 05 GROB Load Automation Conveyor

OP 10B GROB G520 HMC
OP 20B same
OP 30B GROB G500 HMC
OP 40B GROB G520 HMC
OP 45B GROB Gantry

OP 57 Comau Block Line Infinite Buffer (2016) OP 60 GROB Install and Assemble Main Bearing Cap OP B1-50 Valiant ValueFlex Washer OP N/A Large Barnes Central Coolant System w/ Paper

OP N/A Carl Zeiss Industrial Metrology CMM Gage System w/ Manual Load OP 70 GROB G500 single spindle HMC OP 80 GROB Rough Crank Bore OP 90 GROB Finish Crank Bore OP 100 GROB Crank Bore Gage OP 105 GROB Gantry OP 105A Grob Conveyor

OP 110A GROB G520 HMC
OP 120A GROB G520 HMC
OP 130A GROB G500 HMC
OP 140A GROB G500 HMC
OP 145A GROB Gantry
OP N/A GROB Conveyor

OP 110B GROB G520 HMC
OP 120B GROB G520 HMC
OP 130B GROB G500 HMC
OP 140B GROB G500 HMC
OP 145B GROB Gantry
OP N/A GROB Conveyor

OP 150A GROB G500 HMC
OP 160A GROB G500 HMC
OP 170A GROB G500 HMC
OP 170B GROB G500 HMC
OP 180 GROB Crank Bore Gage
OP 182 GROB Gantry
OP 182/2 GROB Conveyor

OP 107 GROB Automation
OP 190 Valiant Wet Brush Deburr
OP N/A Carl Zeiss Industrial Metrology CMM Gage System w/ Manual Load (2014) OP N/A Carl Zeiss Industrial Metrology CMM Gage System w/ Manual Load OP 185 GROB Automation

OP 200 NAGEL Hone Gantry
OP 210 NAGEL Hone 2VS8-50
OP 220 NAGEL Hone 2VS8-50
OP 230 NAGEL Hone 1VS8-50
OP 240 NAGEL 1HS6-100

OP 245 Valiant Conveyor Automation
OP 250 Valiant ValueFlex Final Block Washer Manual Load/Unload

OP N/A Hoffman Filter Corp. UBF 400 K-F-R Suction Band Filter System OP 255 GROB Automation OP 247 Comau Block Line Infinite Buffer OP 260 GROB Thread Check and Plug Installation (Plug and Press) OP 270 GROB Leak Test OP 275 GROB Unload Automation and Inspection