1 / 10
Click to zoom in
1 / 10
For Sale by Toolquip Inc
Surplus Record Dealer Since 2025
Location: Lebanon, OH
Contact Daniela Weaver
Phone Number: 513...> Show Phone Number 513-450-6223
Let the seller know you found their listing on Surplus Record!
Description
2005 DMG GILDEMEISTER CTX 620 X 1000 used CNC lathe. Features 19.68" swing, 42.5" machining length, and 4 axes. Included Siemens 840D CNC, hydraulic tailstock, live tooling, and 15" chuck. Dimensions: 205" x 83" x 90"; weighs ~22,000 lbs.
Spindle Hole Diameter 5.3"
Bar Capacity, Maximum 4.75"
Swing Diameter, Maximum 31.5"
Swing Over Saddle, Maximum 19.68"
Turning Diameter, Maximum 23.6/19.6"
Turning Length, Maximum 42.52"
Transverse Stroke 15.06"
Longitudinal Stroke 43.21"
Y-Axis Stroke 2.55"
Spindle Speed, Range 20 to 2500 RPM
Motorized Tool Speed, Range 1 to 3500 RPM
C-Axis Speed, Range 0 to 100 MIN-1
X, Z-Axis Rapid Travers 1771 IPM
YAxis Rapid Traverse 32.8 IPM
Tailstock Stroke, Automatic 43.31"
Tailstock Quill Diameter 4.72"
Tailstock Quill Shaft 5 MT
Tailstock Quill Travel 5.9"
Main Drive Motor Horsepower 44.2 HP
Dimensions w/Chip Conveyor, L x W x H 205" x 83" x 90"
Weight Approximately 22,000 LBS
Spindle Hole Diameter 5.3"
Bar Capacity, Maximum 4.75"
Swing Diameter, Maximum 31.5"
Swing Over Saddle, Maximum 19.68"
Turning Diameter, Maximum 23.6/19.6"
Turning Length, Maximum 42.52"
Transverse Stroke 15.06"
Longitudinal Stroke 43.21"
Y-Axis Stroke 2.55"
Spindle Speed, Range 20 to 2500 RPM
Motorized Tool Speed, Range 1 to 3500 RPM
C-Axis Speed, Range 0 to 100 MIN-1
X, Z-Axis Rapid Travers 1771 IPM
YAxis Rapid Traverse 32.8 IPM
Tailstock Stroke, Automatic 43.31"
Tailstock Quill Diameter 4.72"
Tailstock Quill Shaft 5 MT
Tailstock Quill Travel 5.9"
Main Drive Motor Horsepower 44.2 HP
Dimensions w/Chip Conveyor, L x W x H 205" x 83" x 90"
Weight Approximately 22,000 LBS
Get Your Price from Toolquip Inc!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Haas #ST-30, CNC Lathe, 21" swing, 21" diameter x 32.5" length, 30 HP, 10" chuck, 3" bar, 3400 RPM, 12 tool, #V2 barfeed, tailstock, Chip Conv., rigid tap, 2025
Category: CNC Lathes and Turning Centers
Seller: Westbrook Engineering Co
Location: Warren, MI
Mfr: Haas
Model: ST-30
Year: 2025
JUST ADDED!
Haas #TL-1, CNC lathe, 20" swing, 10" 3-jaw chuck, 3" bar, 16" diameter, 30" length, A2-6, tailstock
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: TL-1
2016 Haas TL-1 CNC toolroom lathe for sale, serial number 3106705. a 10" 3-jaw chuck, A2-6 spindle nose, and 2,000 RPM spindle. Spindle bore measures 3.5" with 3" bar capacity. Travels of 8" X-axis and 30" Z-axis support up to 30" max cutting length and 16" max cutting diameter. Includes manual MT4 tailstock, quick ...more
JUST ADDED!
Haas #SL-20TB, CNC turning center, 21" swing, 10" chuck, 2.5" bar, 13" dia., 22.5" lgth, 10 turret, A2-6, tool presetter, tailstock, 2008
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: SL-20TB
Year: 2008
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Haas CNC Control, A2-6 Spindle with 3.0" ...more
JUST ADDED!
Romi #M20, CNC Lathe, 20.5" Swing, 60" Centers, 3.15" Spindle Bore, 2,200 RPM, 8-Station Turret
Category: CNC Lathes and Turning Centers
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Romi
Model: M20
Romi 20.5" x 60" CNC Lathe, Model M20, 3.15" Spindle Bore, Asset # 17901, Serial # 002-088433-404, Capacity (In inches), Center Height: 10.04, Distance Between Centers: 60, Swing Over Bed: 20.5, Swing Over Cross Side: 10.2, Swing Over Saddle Wings: 17.7, X-Axis Travel: 11, Z-Axis Travel: 60, Bed, Width: ...more
JUST ADDED!
Hardinge #SR-200MSY, CNC Lathe, 7.45" X, 3.37" Y, 21.54" Z, 20.4" swing, 17.2" turning length, 2.5" bar, 30 HP, 4,500 RPM, 12-station turret, Fanuc control, 2008
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Hardinge
Model: SR-200MSY
Year: 2008
Used CNC Lathe, FANUC "i" Series Control, s 20.44" swing, 12.28" max turning diameter, and 17.2" turning length. Includes tool setter, hydraulic collet chuck, and LNS barfeed, 30 HP., SWING DIAMETER OVER WAY COVER. 20.44", TURNING DIAMETER MAX. 12.28", MAX. TURNING LENGTH. 17.2", X-AXIS TRAVEL. 7.45", Z-AXIS TRAVEL. ...more
