1 / 9
Click to zoom in
1 / 9
For Sale by Carolina Machinery Sales
Surplus Record Dealer Since 2021
Location: Monroe, NC
Contact Ralph Viegelmann
Phone Number: 704...> Show Phone Number 704-288-1904
Let the seller know you found their listing on Surplus Record!
Description
Two identical systems available. Both are removed from service and ready to load. Variety of infeed decks and conveyors also available.
Specifications:
Frame: 3" X 3" X 3/16" square tubing or heavier
Material: Maximum slab length 10'3"*
Minimum slab length 30"
Maximum slab thickness 6"
Maximum slab width 12"
Adjustment: Manual sets for 3 ½ /" or 5 ½ /"
Maximum distance between saw 12"
Minimum distance between saws 3 ½ "
Saws: Carbide tipped circular saws. 30" diameter, 30 teeth, 1 5/8" bore
with 5/8" pinholes on 3" bolt centers
Motors: (2) 40HP Worldwide energy efficient motors on each arbor
(1) hydraulic feed
Al motors are totally enclosed fan cooled
Feed system: Sharp chain feed. One continuous chain with approximately 10'
in feed. Out feed is 16" wide X 10' long belt conveyor. Feed
speed is variable from 30 FPM to 100 FPM. Gravity hold down
sprockets steady the slabs or cants through the cut.
Specifications:
Frame: 3" X 3" X 3/16" square tubing or heavier
Material: Maximum slab length 10'3"*
Minimum slab length 30"
Maximum slab thickness 6"
Maximum slab width 12"
Adjustment: Manual sets for 3 ½ /" or 5 ½ /"
Maximum distance between saw 12"
Minimum distance between saws 3 ½ "
Saws: Carbide tipped circular saws. 30" diameter, 30 teeth, 1 5/8" bore
with 5/8" pinholes on 3" bolt centers
Motors: (2) 40HP Worldwide energy efficient motors on each arbor
(1) hydraulic feed
Al motors are totally enclosed fan cooled
Feed system: Sharp chain feed. One continuous chain with approximately 10'
in feed. Out feed is 16" wide X 10' long belt conveyor. Feed
speed is variable from 30 FPM to 100 FPM. Gravity hold down
sprockets steady the slabs or cants through the cut.
Get Your Price from Carolina Machinery Sales!
Buyers Who Viewed This Listing Also Viewed:
CSMI #Hi-Tech, Edger w/Optimizing, Two-saw Edger, Top reman Head & Syste, Infeed, Unscrambler, Scanning & Optimization
Category: Board / Wood Edgers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Csmi
Model: HI-TECH
CSMI Hi-Tech Optimized Board Edger. Complete with the following s: -- Two-saw Edger. --Top reman Head and System. --Infeed. --Unscrambler. --Scanning and Optimization. NOTE: Offered earlier at $75,000.
Gauer #5H-36, edger, 36" W x .120" capacity
Category: Board / Wood Edgers
Seller: Diamond Jack Machinery Inc
Location: Fort Smith, AR
Mfr: Gauer
Model: 5H-36
Gauer 5H-36 Edger, S/N 1283891, Model 5H-36, Capacity 24GA to 11 GA.025” to.120 Thickness, Max width 36”, Approx size 5 W x 30” D x 4’ Tall.
Gauer #5H-40, 40" edger11-24 gauge, 5/8"-48" width, 125 FPM, manual coil adjustment
Category: Board / Wood Edgers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Gauer
Model: 5H-40
MODEL #: 5H-40, SERIAL #: A3941154, 11-24 GA, 5/8" - 40" WIDTH, HOT OR COLD ROLLED STEEL, STAINLESS, COPPER OR BRASS, 0-125 FPM, MANUAL COIL ADJUSTMENT, ENTRY AND EXIT PINCH ROLLS, GOOD CONDITION.
