Manufacturer: Wittmann
Model: G-MAX 33
Year: 2017
Feed Opening Width: 9.0
Long: 18.0
HP: 4.0
Stock # 22818A
1 / 10
Click to zoom in
1 / 10
For Sale by Arlington Machinery
Surplus Record Dealer Since 1998
Location: Lake Zurich, IL
Contact Chris / Garrett
Phone Number: 847...> Show Phone Number 847-957-9731
Let the seller know you found their listing on Surplus Record!
Description
Description
- Used 9" x 18" Wittmann G-Max 33 Granulator, New In 2017, 4 HP
- Approx. Throughput: 110 Lbs/HR Material Dependent According To Manufacturer
- 9 Knife Staggered Open Rotor, 6" Wide Knives
- Rotor Speed: 240 RPM
- Infeed Height: 69"
- Approx. 38" x 37" Tiltable Hopper Opening
- 4 HP ABB AC Motor
- Machine Wired For 230/3/60, 13.3A
- S/N: GMAX33-WTWM8814
- New In 2017
- 1/4" Screen Installed
- Discharge Bin Setup For Vacuum Conveying System
- Belt Drive With Auto Tensioning System
- Closed-Loop Recycling & Regrind Design
- With Capacitive Sensor Option Add-on
- Approximate Dimensions: 34" x 28" x 69" H
Get Your Price from Arlington Machinery!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
9" x 19" Shini #SG-2348, beside the press granulator with blower & cyclone, 16.9 HP, new, 2026
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Shini
Model: SG-2348
Year: 2026
Model: SG-2348, Processing Capacity: 400 lbs./hr, Hp: 16.9, Rpm: 415, Screen Size: 8mm, Cutting Style: Staggered Blade, Blade Configuration: 3x4 Rotating - 2 fixed, Cutting Chamber Width In: 19", Cutting Chamber Height In: 9", Voltage: 460/3ph/60hz, Includes: Blower, Cyclone, Dust Collector, Length In: 54", Width In: ...more
JUST ADDED!
9" x 12" Polymer Systems #912-E-SIL, top-feed granulator, 5 HP, 2 fly knife rotor, 1 bed knife, 3/8" screen, sound enclosure
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Polymer Systems
Model: 912-E-SIL
Used 9" x 12" Polymer Systems Top-Feed Granulator, Model 912 E SIL, 5 HP 2 Fly Knife Rotor, 1 Bed Knife Double Angle Cut 61" In-Feed Height, Top Feed Belt Driven 5 HP Baldor SuperE Motor, Cat. EM3218T, 184T Frame 1750 RPM 3/8" Screen Installed Bin Discharge 460/3/60, 6.6A S/N: 2165046 E-Stop Pull, Granulator Start ...more
8.5" x 10" AEC Nelmor #G810, Plastic Granulator, 5 HP
Seller: iGAM
Location: Detroit, MI
Mfr: Aec
Model: G810
This listing is for a USED AEC Nelmor G810 granulator. This machine provides size reduction of plastic scrap through a rotary cutting system driven by a 5 horsepower motor and is used in plastics processing environments for regrind operations and material recovery., Spec Sheet, Manufacturer: AEC (Nelmor) ...more
8.2" x 5.8" Rapid #1521, Granulator, 88 lb/hr, 1996
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Rapid
Model: 1521
Year: 1996
used rapid 1521 lab granulator. capacity 88 lbs/hr. (40 kgs/hr.). 8.2" (210 mm) x 5.85" (150 mm) inlet. rotor incl. 2 x bed knives, 3x3 rotating knives driven by a 2.2 kw-400 volt/50 cycle/ 3 ph. rotor speed 295 rpm. serial # 2501761, new year 1996. previously use in an r&d application. over all dimensions: 18.5" ...more
9" x 12" Polymer Systems #912-ESRL, Press Side Granulator, 190 sq.in. Screen Area, 3.6 sq.ft. Bin capacity, 10.3" Cutting Circle diameter, 400 lbs./hr. Throughput, 7.5-10 HP, 1900
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Polymer
Model: 912-ESRL
Year: 1900
Make: Polymer Systems, Model: 912-ESRL, Year: 1900, Machine Location: Utah, – Throat Size at Chamber: 9 x 12 in, – Screen Area: 190in^2, – Motor: 7.5-10HP, – Cutting Circle Diameter: 10.3in, – Rotor Knives: 2/3, – Bed Knives: 1, – Weight: 1050 lbs., – Throughput: 400 ...more
