Manufacturer: Roundo
Model: R-6-S
Year: 1988
Width: 6.00
Height/Angle Bend: 6.00
Thick: .625
Stock # 89590
For Sale by Kempler Machinery
Surplus Record Dealer Since 2025
Douglas Kempler
847-64...> Show Seller's Phone Number 847-640-8600 Let the seller know you found their listing on Surplus Record!
Description
6" x 6" x 5/8" Roundo R-6-S, Hydraulic
Angle Leg Out: 6" X 6" X 5/8"
Angle Leg In: 5" X 5" X 3/4"
T-Leg Out: WT6
T-Leg In: WT5
T-Leg Down: WT6
Flat Bar Hard Way: 6" X 1-1/2"
Flat Bar Easy Way: 10" X 2"
Square Bar: 3-1/2"
Round Bar: 4-3/8"
Round Pipe: 6" Sch. 40
Square Tube: 5" X 5/16 Wall
Beam on Flange: W12 X 35 / W8 X 31
Channel Flange In / Out: C12 X 30
Channel on Web: C7 X 12.25
Rolling Speed: 23 FPM (Variable)
Roll Diameter: 18"
Shaft Diameter: 7.1" / 6.3"
Main Motor: 20 HP
Voltage: 220V / 440V / 3 Phase
Angle Leg Out: 6" X 6" X 5/8"
Angle Leg In: 5" X 5" X 3/4"
T-Leg Out: WT6
T-Leg In: WT5
T-Leg Down: WT6
Flat Bar Hard Way: 6" X 1-1/2"
Flat Bar Easy Way: 10" X 2"
Square Bar: 3-1/2"
Round Bar: 4-3/8"
Round Pipe: 6" Sch. 40
Square Tube: 5" X 5/16 Wall
Beam on Flange: W12 X 35 / W8 X 31
Channel Flange In / Out: C12 X 30
Channel on Web: C7 X 12.25
Rolling Speed: 23 FPM (Variable)
Roll Diameter: 18"
Shaft Diameter: 7.1" / 6.3"
Main Motor: 20 HP
Voltage: 220V / 440V / 3 Phase
Get Your Price from Kempler Machinery!
Buyers Who Viewed This Listing Also Viewed …
6" x 6" x 1/2" Roundo #R-6-S, Hydraulic Angle Roll with tubing dies
Category: Angle Bending Rolls
Seller: Protectoplas
Location: Streetsboro, OH
Mfr: Roundo
Model: R-6-S
6" x 6" x 5/8" Roundo #R6, angle bending roll, 18" roll diameter, 15 HP, pendant Control with readouts
Category: Angle Bending Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Roundo
Model: R6
SERIAL. 12354, MODEL. R6, ROLL DIAMETER. 18", ANGLE LEG OUT. 6" X 6" X 5/8", ANGLE LEG IN. 5" X 5" X 3/4", FLAT ON FLAT. 8" X 2", FLAT ON EDGE. 6" X 1-1/2", PIPE. 6", BEAM EASY WAY. 12", BEAM HARD WAY. 6", VARIABLE ROLLING SPEED. 0 TO 23 FPM, LEG IN LEG OUT GUIDE ROLLS. YES, HYDRAULIC ROLL ADJUSTMENT. YES, GUIDE ROLL ...more
6" x 6" x 1/2" Faccin #RMCI-170, hydraulic angle bending roll, 6.7" shaft diameter, 18.9" roll diameter, hydraulic power adj rolls, 2011
Category: Angle Bending Rolls
Seller: G-2000
Location: Toledo, OH
Mfr: Faccin
Model: RMCI-170
Year: 2011
SERIAL.: 11044007-4038, MODEL.: RCMI-170, YEAR NEW.: 2011, SHAFT DIAMETER.: 6.7", ROLLS DIAMETER.: 18.9", ROTATION SPEED.: 0-16 FT/MIN INFINITELY VARIABLE, ANGLE LEG OUT.: 6" X 6" X 1/2" 60" RADIUS, HYDRAULIC ADJUSTMENT POWER ROLLS, 3 INDEPENDENTLY MOTORIZED ROLLS, LATERAL GUIDE ROLLS INDEPENDENTLY ADJUSTABLE IN 6 ...more
6" x 6" x 1" Roundo #R-7-S, hydraulic angle bending roll, 3-rolls,vari-roll speeds,lateral angle guide rolls,under power
Category: Angle Bending Rolls
Seller: Gerrard Machinery Company
Location: Eureka, MO
Mfr: Roundo
Model: R-7-S
Year: 1974
6" x 6" x 5/8" Bendmak #PRO-180, 20 HP, 18.11" roll diameter, separate movable digital read out /control panel, #4080
Category: Angle Bending Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: PRO-180
6” X 6” X ” Angle Roll with Separate Movable Digital Readout / Control Panel, ST-52 Steel Construction Body, Hardened and Ground Special Steel Shafts, Hydraulic Guide Rolls Adjustable in 3 Directions, and Variable Speed of Rotation., Max Section Modulus (In³): 12.8”Power: 20 HPRoll ...more
