For Sale by GCH Machinery
Surplus Record Dealer Since 1966
Sales Dept.
586-30...> Show Seller's Phone Number 586-300-2944 Let the seller know you found their listing on Surplus Record!
Description
6" x 18" Norton, CTU, Plain, Plunge, 24" x 3" Wheel, Gear & Rack Table, Cam Workhead, Special Tailstock for Pistons, Above Wheel Auto Truing, As Is .
6" x 18" NORTON "CTU" PLAIN CYLINDRICAL GRINDER
S/N 25161 Year: 1952
STANDARD CATALOG SPECIFICATIONS
Maximum swing..................................... 6 31/32"
Maximum distance between centers.................. 18"
TABLE TRAVERSE
Number of speeds.................................. Infinite
Table speed range, per min........................ 2" to 240"
SWIVEL TABLE
Swivel table graduated?degrees included
angle:............................................ 25 & 21 degrees
Swivel table graduated?taper per foot............. 5 1/4 to 4 1/2"
BASE WAYS
Width of flat way................................. 1 5/8"
Width of V?way (projected)........................ 1 5/8"
WHEEL SLIDE WAYS
Width of flat way................................. 2 3/4"
Width of V?way (projected)........................ 2 3/4"
OIL RESERVOIR CAPACITY
Standard inside hydraulic reservoir............... 20 gallons
Outside hydraulic reservoir....................... 30 gallons
Ways lubricant reservoir.......................... 1 1/3 gallons
WHEEL SPINDLE
Large bearing (LH)............................ 2 5/8" x 4 3/4"
Small bearing (RH)............................ 2 3/8" x 4 3/4"
Spindle speeds................................ 1620 and 1890 RPM
Reciprocation, when supplied.................. 0" to 1/4"
WEIGHT
Net weight including motor.................... 8,900 lbs. approx.
EQUIPMENT & FEATURES
Gear & rack table
Cam work head
24\" x 3\" Grinding wheel
Timer
Special tail stock for pistons
Above the wheel auto-truing
Specifications are deemed accurate, however, subject to verification or prior sale.
6" x 18" NORTON "CTU" PLAIN CYLINDRICAL GRINDER
S/N 25161 Year: 1952
STANDARD CATALOG SPECIFICATIONS
Maximum swing..................................... 6 31/32"
Maximum distance between centers.................. 18"
TABLE TRAVERSE
Number of speeds.................................. Infinite
Table speed range, per min........................ 2" to 240"
SWIVEL TABLE
Swivel table graduated?degrees included
angle:............................................ 25 & 21 degrees
Swivel table graduated?taper per foot............. 5 1/4 to 4 1/2"
BASE WAYS
Width of flat way................................. 1 5/8"
Width of V?way (projected)........................ 1 5/8"
WHEEL SLIDE WAYS
Width of flat way................................. 2 3/4"
Width of V?way (projected)........................ 2 3/4"
OIL RESERVOIR CAPACITY
Standard inside hydraulic reservoir............... 20 gallons
Outside hydraulic reservoir....................... 30 gallons
Ways lubricant reservoir.......................... 1 1/3 gallons
WHEEL SPINDLE
Large bearing (LH)............................ 2 5/8" x 4 3/4"
Small bearing (RH)............................ 2 3/8" x 4 3/4"
Spindle speeds................................ 1620 and 1890 RPM
Reciprocation, when supplied.................. 0" to 1/4"
WEIGHT
Net weight including motor.................... 8,900 lbs. approx.
EQUIPMENT & FEATURES
Gear & rack table
Cam work head
24\" x 3\" Grinding wheel
Timer
Special tail stock for pistons
Above the wheel auto-truing
Specifications are deemed accurate, however, subject to verification or prior sale.
Get Your Price from GCH Machinery!
Buyers Who Viewed This Listing Also Viewed …
6" x 18" Norton #CTU, plain grinder
Category: Plain Cylindrical Grinders
Seller: Turners Machinery Inc
Location: Santa Paula, CA
Mfr: Norton
Model: CTU
6" X 18" NORTON CTU PLAIN GRINDER, MAKE: NORTONMDL: CTUS/N: CTU-25058YR: 1953SWING: 6"CENTER: 18"DIAMETER WHEEL: 20"HP: 7 1/2PRICE: $5,950.00LOCATION: SANTA PAULA, CA***SPCIFICATION SHOWN ARE TO BEUSED AS A GUIDELINE ONLY. IT ISTHE CUSTOMERS RESPONSIBILITY TOCHECK FOR SIZE AND S BEFOREPURCHASING WE WILL NOT BE ...more
10" x 48" Norton #CTU, 30" x5" x12" wheel, 2 -240 IPM, tailstock, plunge cycle, pick feed
Category: Plain Cylindrical Grinders
Seller: Seminole Machinery Company
Location: Rochester, MI
Mfr: Norton
Model: CTU
(1) USED 10" X 48" NORTON MODEL CTU PLAIN CYLINDRICAL GRINDER: Nominal swing: 10" Nominal length: 48" Grinding wheel size: 30" x 5" x 12" bore Table speeds: 2 – 240 IPM Headstock speeds: 50 – 80 – 125 – 200 RPM Headstock center taper: No 14 Jarno Tailstock ...more
JUST ADDED!
6" x 18" Cincinnati Milacron #6x18, Semi-Automatic Plunge Cylindrical Grinder, 30° plunge/angle capability, 1960
Category: Plain Cylindrical Grinders
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Cincinnati Milacron
Model: 6X18
Year: 1960
For sale: 1960 Cincinnati Milacron 6x18 Semi-Automatic 30 Plunge Grinder. This used cylindrical grinder offers precise craftsmanship for cylindrical, plain, and angle head grinding. Ideal for enhancing production efficiency with reliability., 1960 CINCINNATI MILACRON 6X18.
6" x 18" Landis #1R, plain cylindrical grinder, 16" x 1.5" x 5" grinding wheel, 3 HP, 1755 RPM
Category: Plain Cylindrical Grinders
Seller: GCH Machinery
Location: Warren, MI
Mfr: Landis
Model: 1R
Landis 1R 6x18 Plain Cylindrical Grinder, 6" x 18" 1R LANDIS PLAIN CYLINDRICAL GRINDER, S/N 810-7, STANDARD CATALOG, Nominal work swing. 6", Nominal distances between work centers. 18", Maximum diameter work standard machine will grind with full size standard wheel. 6 7/8", Minimum diameter wheel to grind zero ...more
6" x 18" Landis #1R, plunge feed, Tru-Form dresser, spark-out timer, 1974, #2912
Category: Plain Cylindrical Grinders
Seller: Gibbs Machinery Co
Location: Warren, MI
Mfr: Landis
Model: 1R
Year: 1974
MODEL #1R 6" X 18" LANDIS PLAIN O.D. GRINDER, Plunge Feed, TruForm Semi-Automatic Wheel Dresser, Headstock & Tailstock W/Centers, Spark-Out Timer, Wheel Mount Centers, 5-1/4" Wide Wheel Guard, 7-1/2 HP Wheelhead Motor, Handwheel Traverse, Coolant System, Nominal Work Swing: 6", Nominal Distance Between Work ...more
