Manufacturer: Kent
Model: KGS-200
Year: 1982
Width/Cross: 6.0
Length/Longit.: 18.0
Price: $2,500 USD
1 / 10
Click to zoom in
1 / 10
For Sale by Heavy Wall Consulting
Surplus Record Dealer Since 2026
Location: Long Beach, CA
Contact Jackson Barry
Phone Number: 562...> Show Phone Number 562-488-3494
Let the seller know you found their listing on Surplus Record!
$2,500 USD
Description
Kent Industrial Co. Model KGS-200 surface grinder uses an electromagnetic chuck table to hold ferrous workpieces securely during grinding, with dedicated controls for magnet on/off, coolant flow, and spindle power on the operator control panel.
Dual handwheels on the wheel head control fine and coarse vertical feed for precision stock removal, while a separate crossfeed handwheel controls table travel.
A built-in coolant reservoir and pump system, along with an integrated work lamp, support continuous precision grinding operations. The 1 HP three-phase motor (Adlee Industrial, 3,420 RPM, 220/440V) drives the grinding wheel through a compact head assembly.
This equipment is understood to be in good working condition but has not been tested by this shop. Please see photos for cosmetic details.
1982 KENT KGS-200
SPECIFICATIONS:
Table-W... 18"
Table-L... 6"
Power..... 1.5 hp
EQUIPPED WITH:
Kent Industrial KGS-200 surface grinder (Serial 8208820-7)
Electromagnetic chuck table
Integrated coolant reservoir and pump system
Siemens fused disconnect switch/electrical enclosure
Work lamp
Grinding wheel and mounting hardware currently installed
Dual handwheels on the wheel head control fine and coarse vertical feed for precision stock removal, while a separate crossfeed handwheel controls table travel.
A built-in coolant reservoir and pump system, along with an integrated work lamp, support continuous precision grinding operations. The 1 HP three-phase motor (Adlee Industrial, 3,420 RPM, 220/440V) drives the grinding wheel through a compact head assembly.
This equipment is understood to be in good working condition but has not been tested by this shop. Please see photos for cosmetic details.
1982 KENT KGS-200
SPECIFICATIONS:
Table-W... 18"
Table-L... 6"
Power..... 1.5 hp
EQUIPPED WITH:
Kent Industrial KGS-200 surface grinder (Serial 8208820-7)
Electromagnetic chuck table
Integrated coolant reservoir and pump system
Siemens fused disconnect switch/electrical enclosure
Work lamp
Grinding wheel and mounting hardware currently installed
Inquire Further with Heavy Wall Consulting!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
6" x 14" Kent #KGS-200, Surface Grinder, 8" wheel, 1.5 HP
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Kent
Model: KGS-200
KENT KGS-200 SURFACE GRINDER 6" x 14" #6110 #1, Chuck Size.6" x 12" ( grinder can accommodate 6" x 14" chuck ), Wheel Diameter.8", Main Motor.1-1/2 HP, Electrics.220/440V, 3ph, Walker Fine Line Electromagnetic Chuck with Control, Vac-U-Guard Wheel Guard, Work Lamp.
6" x 12" Kent #KGS-200, horizontal surface grinder, PMC, 8" X 1" X 1-1/4"grinding wheel, 1.5 HP, 1980
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kent
Model: KGS-200
Year: 1980
SERIAL. 801061-2MODEL. KGS-200YEAR NEW. 1980CAPACITY. 6" X 14"SPINDLE TO TABLE (MAXIMUM). 17-1/2"LONGITUDINAL TABLE TRAVEL. 18"CROSS TABLE TRAVEL. 7"TABLE TRAVERSE. HANDCROSS FEED RATES. HANDPERMANENT MAGNETIC CHUCK SIZE. 6" X 14"GRINDING WHEEL SIZE. 8" X 1" X 1-1/4"GRINDING WHEEL SPEED. 3460 RPMMOTOR. 1-1/2 HORSEPOWER.
8" x 16" Kent #KGS-200, horizontal reciproc table surface grinder, 8" dia. x 1" W x 1.25" bore wheel, 2850 RPM, Kanetsu PMC, Sony digital read out, 1997
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Kent
Model: KGS-200
Year: 1997
KENT KGS-200 Surface Grinder for sale, 1997 model with horizontal spindle. s 18" x 6" table, 1.5 hp motor, and 8" grinding wheel. Dimensions: 57.9" x 46.1" x 85.4". Ideal for precision work with 265 lbs max table load. 1400 lbs net weight., Table-W 18" 457.2 mm Table-L 6" 152.4 mm Horz/Vert Horz Horz Power ...more
JUST ADDED!
6" X 18" Harig #618, Horizontal Surface Grinder, 1.5 HP, 3425/2800 RPM, 3/60/50/208-230/460
Seller: HGR24
Location: Euclid, OH
Mfr: Harig
Model: 618
Inventory No. 0626-041-0038 Manufacturer Harig Model No. 618 Name Surface Grinder Arrival Date 06-24-2026 Dimensions L x W x H (inches) 51 x 43 x 87 Capacity 6” X 18” Electrical 3/60/50/208-230/460 Weight (lb.) 1275 Category Machine Tools Condition Used Available Quantity 1 Item Manual, Lesson Motor, 1.5 ...more
JUST ADDED!
6" x 18" Harig #618W, surface grinder, 20" X, 6.75" Y, 12" Z, 7" wheel, 3450 RPM, Harig AutoStep III, Walker LBP magnetic chuck
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Harig
Model: 618W
Harig 618W Surface Grinder with AutoStep III, Table Size: 6" × 18", Longitudinal Travel (X): 20", Cross Travel (Y): 6.75", Vertical Travel (Z): 12", Maximum Workpiece Height Under Wheel: 10", Spindle Speed: 3,450 RPM, Wheel Diameter Capacity: 7", Harig AutoStep III, Digital X / ...more
