1 / 4
Click to zoom in
1 / 4
For Sale by JM Industrial LLC
Surplus Record Dealer Since 1993
Location: Millwood, WV
Contact Sheldon Sharp
Phone Number: 304...> Show Phone Number 304-273-0795
Let the seller know you found their listing on Surplus Record!
$5,000 USD
Description
Used 560 CFM Shick Tube-veyor Circular Filter Receiver Dust Collector
All mild steel construction with bolted top plenum with a bottom 24" air fluidization hopper.
Bag chamber and clean air plenum is 30" diameter.
Installed quantity of 8 bag filters & cages (6" X 6'L each) bottom loading.
Hopper (70 ): 42" with level sensor and clean-out panel.
Dirty Air Inlets (X2): 3"NPT tangential
Clean Air Outlets (X2): 3"O.D. sleeves
Solids Discharge: 6.5" with 16" square flange (from fluidization hopper)
Front side hinged bag access door (20" X 35").
Saddle bracket mounted support legs (7" above solids discharge).
Installed compressed air header with solenoid valves
Overall Height: 128"
All mild steel construction with bolted top plenum with a bottom 24" air fluidization hopper.
Bag chamber and clean air plenum is 30" diameter.
Installed quantity of 8 bag filters & cages (6" X 6'L each) bottom loading.
Hopper (70 ): 42" with level sensor and clean-out panel.
Dirty Air Inlets (X2): 3"NPT tangential
Clean Air Outlets (X2): 3"O.D. sleeves
Solids Discharge: 6.5" with 16" square flange (from fluidization hopper)
Front side hinged bag access door (20" X 35").
Saddle bracket mounted support legs (7" above solids discharge).
Installed compressed air header with solenoid valves
Overall Height: 128"
Inquire Further with JM Industrial LLC!
Buyers Who Viewed This Listing Also Viewed:
550 cfm Mikro Corporation #8-B-BV, Bin Vent Dust Collector, 84 sq.ft., (9) 4.5" diameter x 8' L bags, 28" x 28" flange bottom, 6:1 air-to-cloth ratio
Category: Dust Collectors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Mikro
Model: 8-B-BV
Dust collector, bin vent, Mikro-Pulsaire model 8-B-BV with 9 bags, 4-1/2" diameter x 8' long. Unit has a total of 84 sq. flat top. surface area, complete with 28" x 28" flange bottom for mounting. Unit has approx. 550 CFM rating at 6:1 air-to-cloth ratio. OAD: 38" x 44" x 10' tall, approx. 550#., Square Ft.: ...more
JUST ADDED!
550 cfm Donaldson Torit #VS550, Dust Collector, 1 HP, 3450 RPM, 65 sq.ft.
Category: Dust Collectors
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Donaldson Torit
Model: VS550
DONALDSON TORIT VS550 Dust Collector #8270 #1, Nominal Airflow: 550 CFM (Cubic Feet Per Minute), Motor: 1 HP, 3450 RPM, Filter Area: 65 square feet of media (single cartridge), Filter Type: Two-stage cartridge with proprietary Pleatloc media corrugation, Cleaning System: Automatic "Vibra-Shake" mechanism, Inlet Size: ...more
550 CFM Torit #VS550, Dust Collector, 1 HP, 3450 RPM, 460 V.
Category: Dust Collectors
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Torit
Model: VS550
Torit Dust Collector, Model: VS550, Motor: 1 HP, 3450 RPM, 208/230/460 V, 3PH, CFM: 550, Good Condition, In Storage: Toledo, OH.
550 cfm Donaldson #VS550, bag type dust collector, 65 sq.ft., 1 HP, 5" inlet, shaker
Category: Dust Collectors
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Donaldson
Model: VS550
SERIAL. 10395058, MODEL. VS-550, CFM. 550, FILTER AREA. 65 ft2, DUST DRAWER VOLUME. 1.8 CU FT, SOUND dB(A). 69, CARTRIDGE STAGES. 2, SHAKER. YES, INLET. 5", PHASE. 3, MOTOR HORSEPOWER. 1.
550 cfm Donaldson #VS550, Dust Collector, Carbon Steel, 65 sq.ft., 1 HP, 230/460 V, 3 Ph
Category: Dust Collectors
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Donaldson
Model: VS550
Used 65 sq ft Donaldson-Torit vibra-shake dust collector, model VS 550, 1 hp, 230-460V, 3-Ph, 60Hz.
