50 HP 1775 RPM Baldor, Frame 326TC, TEFC, 230/460 Volts, 3 phase

Product Specifications

• Manufacturer: Baldor Electric Co. (Baldor-Reliance), Fort Smith, AR
• MPN / Model: CEM4115T
• Product Line: Super-E Motor, NEMA Premium
• Spec Number: 12C052Y141G1
• Serial Number: C1505271327
• Product Type: Three-Phase AC Motor
• Horsepower: 50 HP
• Frame: 326TC
• Voltage: 230/460 V
• Frequency: 60 Hz
• Phase: 3
• Speed: 1775 RPM
• Full Load Amps: 116/58 A (usable at 208 V: 128 A)
• Enclosure: TEFC
• Service Factor: 1.15
• Insulation Class: F
• Design: A
• Code Letter: H
• Power Factor: 85%
• NEMA Nominal Efficiency: 94.5%
• Rating: 40C ambient, continuous
• Drive-End Bearing: 6312
• Opposite Drive-End Bearing: 6311
• Grease: Polyrex EM
• Space Heaters: Nameplate fields are blank
• Mount: C-Face and Foot Mount (per TC frame designation)
• UPC (carton label): 781568436660
• Order No. (carton label): C0415/0247
• Carton Label Weight: 675.000 (unit not printed)
• Country of Origin: USA
• Marks on Nameplate: NEMA Premium, CSA Energy Verified, UL recognition mark
• Condition: Surplus - Untested

Product Description

Baldor-Reliance Super-E CEM4115T three-phase AC motor, spec 12C052Y141G1, serial number C1505271327. The nameplate lists 50 HP, 230/460 V, 116/58 A, 3 phase, 60 Hz, 1775 RPM, frame 326TC, TEFC enclosure, Class F insulation, design A, code letter H, service factor 1.15, 85% power factor, 94.5% NEMA nominal efficiency and a 40C ambient continuous rating. It carries 6312 and 6311 bearings greased with Polyrex EM and is marked made in the USA by Baldor Electric Co., Fort Smith, AR.

The motor is pictured in an opened original Baldor carton on a pallet, with a lifting eye and a paper tag attached. The carton label shows the CEM4115T, order number C0415/0247 and UPC 781568436660. The space heater fields on the nameplate are blank, and no inverter rating line is printed on this nameplate.

Sold as surplus, untested; this motor has not been run or tested by MRO Exchange. Buyers should confirm the model, ratings and frame dimensions against their application before purchase.