1 / 10
Click to zoom in
1 / 10
For Sale by Machinery & Equipment Co
Surplus Record Dealer Since 1969
Location: Brisbane, CA
Contact Dominic Piazza
Phone Number: 415...> Show Phone Number 415-649-9611
Let the seller know you found their listing on Surplus Record!
Description
Stainless Steel Nauta Mixer, approximately 50 cubic feet capacity, measures 6' diameter x 8' deep, 60 degree cone with 10" diameter center bottom outlet with dust tight valve. Includes welded side connection at bottom of cone with manually operated 10" x 6" valve on bottom side of cone, with access door on each side. Previously mezzanine mounted with (4) mild steel mounts on side of cone. Top head is bolted with bridge mounted drives, 28 x 10 clamped top cover, including safety grate and 6" diameter flanged opening. Auger driven by approximately 10 HP motor through gearbox with approximately 2 HP agitator arm drive. Includes control panel including controls for mixing mode, discharge mode, nauta screw, nauta arm, rotary valves and dust collector (not offered with rotary valve or dust collector). Previously mixing powder for food processing facility. Unit was previously mezzanine mounted so there are no legs nor frame.
HP: 10 (Approx.)
Cubic Feet: 50
Measurements: 6' Diameter X 8' Cone
Materials of Construction: Stainless Steel
Basis: FOB
HP: 10 (Approx.)
Cubic Feet: 50
Measurements: 6' Diameter X 8' Cone
Materials of Construction: Stainless Steel
Basis: FOB
Get Your Price from Machinery & Equipment Co!
Buyers Who Viewed This Listing Also Viewed:
41 cu.ft. Jh Day, Stainless Steel Nauta Mixer, 5' diameter Top, 6.3' deep Cone Bottom, 5 HP, 1160 RPM
Category: Nauta Mixers and Blenders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Jh Day
Used J.H. Day approximately 41 cubic foot type 304 stainless steel Nauta mixer. Approximately 5' diameter at top, 6'4" deep Cone bottom. Single gear box drives screw & orbital arm, 5 HP 1160 rpm motor, bridge mounted, bottom steady bearing. Side bottom discharge outlet. (3) pipe leg supports., J.H. DAY 41 ...more
80 cu.ft. J H Day, Stainless Steel Jacketed Nauta Cone Mixer, 80" diameter x 108" H tapering, 10" bottom discharge
Category: Nauta Mixers and Blenders
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: J H Day
Used JH Day Stainless Steel Jacketed Nauta Cone Mixer - 80 cu ft, Serial Number: 88815, Stainless steel single wall cone shell with two-zone dimple-plated jacketing (non-rated), Mixing cone: 80" X 108"H tapering to 10" at bottom discharge, Bolted top cover supports the auger & orbiting drives and a ...more
32 cu.ft. Ross #A32 Cone, nauta mixer, Stainless Steel, approx. 68" D x 91" H mixing chamber, top mounted drive system, side chopper w/motor, 12" bottom outlet
Category: Nauta Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Ross
Used 32 cu ft Ross nauta mixer, model A32 Cone SE, 304 stainless steel construction, approximately 68" diameter x 101" high mixing chamber, 1 hp orbit arm motor drive, 5 hp screw motor drive, 5 hp side mounted chopper with motor, 230/460 volt motors, 12" bottom outlet with pneumatic slide gate valve, approximately ...more
326.6 cu.ft. A. Bolz #MF400, Vert Conical Batch Mixer, hanging, 4000L Working Capacity, 316 Stainless Steel, explosion proof Motors, Pharma Grade
Category: Nauta Mixers and Blenders
Seller: Aaron Equipment Co
Location: Schaumburg, IL
a. bolz gmbh & co kg vertical conical batch (nauta type) mixer, model mf400. material of construction is 316 (v4a 1.4401/04) on product contact parts. inside polished to corn 240. total capacity 326.66 cu ft. (9250 liters), working capacity 141.25 cu. ft. (4000 liters). not jacketed. inside rated for 1.5 psi (0.1 ...more
32 cu.ft. Ross Nauta #A32-Cone, Blender, 68" diameter x 91" H Mixing Chamber, 12" Bottom Outlet, 5 HP, 230/460 V
Category: Nauta Mixers and Blenders
Seller: HGR24
Location: Euclid, OH
Mfr: Ross
STAINLESS STEEL CONSTRUCTION, APPROX. 68" DIAMETER X 91" HIGH MIXING CHAMBER, TOP MOUNTED DRIVE SYSTEM, SIDE CHOPPER WITH MOTOR, 12" BOTTOM OUTLET WITH PNEUMATIC SLIDE GATE VALVE.
