1 / 4
Click to zoom in
1 / 4
For Sale by Smith Machinery Co
Surplus Record Dealer Since 2001
Location: Ames, IA
Contact Jim Smith
Phone Number: 515...> Show Phone Number 515-233-6330
Let the seller know you found their listing on Surplus Record!
Description
Specifications
Equipped With
Equipped With
| Drill Capacity | 5/8" |
| Horsepower | 1/2 |
| Motor | N/A |
| Spindle Taper | MT2 |
| Working Diameter | 14.125 inches |
| Number of Speed | 9 |
| Spindle Speed Range | 240-3,400 RPM |
| Electrics | CE 110-Volt |
| Weight | 175 pounds |
| Spindle Travel | 3.125 inches |
| Column Diameter | 3.125 inches |
| Column Diameter | 3.125 inches |
| Table Depth | 11.75 inches |
| Table Width | 11.75 inches |
| Base Depth | 17.75 inches |
| Base Width | 12.25 inches |
| Spindle to Table | 16.5 inches |
| Spindle to Base | 26.5 inches |
| Overall Height | 42.5 inches |
Equipped With
Equipped With
Features:
* A locking handle hub with convenient dial-in adjustment and an easy to read scale for fast, accurate, and repeatable depth setting changes.
* Large diameter sturdy spindle for rigid drilling has four bearing points for smooth operation.
* Bench and floor models both have machined table and base surfaces with t-slots for mounting and fixturing.
* Quick release belt tensioning for fast, easy speed changes.
Specifications Subject to Verification
Delivery:
Subject to Stock
* A locking handle hub with convenient dial-in adjustment and an easy to read scale for fast, accurate, and repeatable depth setting changes.
* Large diameter sturdy spindle for rigid drilling has four bearing points for smooth operation.
* Bench and floor models both have machined table and base surfaces with t-slots for mounting and fixturing.
* Quick release belt tensioning for fast, easy speed changes.
* CE safety electrical package features push button on/off switch, emergency stop button, low voltage controls, thermal overload, and interlock safety switch for belt cover.
* Massive cast head, machined column, and sturdy cast base reduces vibration.
* Quick bit changes with standard Morse Taper (MT), common adaptors or standard keyed chuck.
* Handle has 3 spokes with spring return for precise operator control and ergonomic operation.
Equipped With:
* ½” Keyed chuck
* Drift for bit removal
* Plexiglas chip and chuck guard
Notes:* Massive cast head, machined column, and sturdy cast base reduces vibration.
* Quick bit changes with standard Morse Taper (MT), common adaptors or standard keyed chuck.
* Handle has 3 spokes with spring return for precise operator control and ergonomic operation.
Equipped With:
* ½” Keyed chuck
* Drift for bit removal
* Plexiglas chip and chuck guard
Specifications Subject to Verification
Delivery:
Subject to Stock
Get Your Price from Smith Machinery Co!
Buyers Who Viewed This Listing Also Viewed:
Continental #GP14-500, table top drill press, #MT2 spindle taper, 12 speeds, 1/2 HP
Category: Single Spindle Drill Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Continental
Model: GP14-500
MODEL. GP14-500, SERIAL. F411, SPINDLE TAPER. MT2, CAPACITY. 5/8", SPEEDS. 12, MOTOR. 1/2 HORSEPOWER.
Dayton #3Z570, Single Spindle Drill Press
Category: Single Spindle Drill Presses
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Dayton
Model: 3Z570
Dayton Model 3Z570 Drill Press, Asset # 17166.
Clausing Drill Press
Category: Single Spindle Drill Presses
Seller: G-2000
Location: Toledo, OH
Mfr: Clausing
Machine Type.Presses, Drill Manufacturer.CLAUSING Model.N/A Year.N/A Condition.Used.
Delta, single spindle drills
Category: Single Spindle Drill Presses
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: Delta
17" DELTA DRILL PRESS, MT2 SPINDLE, 4" TRAVEL, 5-STEP PULLEY DESIGN, 1 HP BALDOR 1400 RPM, 3 PHASE MOTOR, 208-230/460 VOLT, - 18 X 30 TABLE, - MANUAL CRANK TABLE ELEVATION, - MAG STARTER.
Clausing #2284, Drill press, 2013
Category: Single Spindle Drill Presses
Seller: Investment Recovery Services Int'l
Location: Cincinnati, OH
Mfr: Clausing
Model: 2284
Year: 2013
