1 / 10
Click to zoom in
1 / 10
For Sale by D & H Machinery Inc
Surplus Record Dealer Since 1963
Location: Toledo, OH
Contact Sales
Phone Number: 419...> Show Phone Number 419-841-3586
Let the seller know you found their listing on Surplus Record!
Description
36" Paxson Driven Loop Slitting Line
Material: CR, Galv, Tin Plate, Silicone, Stainless
Weight Capacity: 30,000 lbs.
Width Capacity: 36"
Thickness Range: 0.006" to 0.095"
Coil I.D.: 16" to 20"
Coil O.D.: 72" Entry
70" Exit
Line Speed: 600 to 1200 FPM
Line Direction: Right to Left
Consisting of the following:
-Entry Coil Car:
Pit Type
Self-Contained Hydraulics
-Uncoiler:
Hydraulic Expansion
16" - 20" Coil I.D. Range
Sliding Base
Wichita Brake
AC Motor Threading Drive
-Photoelectric Edge Detector:
-Peeler Table:
Entry Passline Rolls
Entry Side Guides
-Slitter Heads:
(2) Heads (Crane Removal Type)
4.00" Dia. x 38" Face Arbors
Parallel Arbor Adjustment
50 HP DC Motor Drive, 1150 to 2300 RPM W/Blower
Right Angle Reducer/Pinion Stand, W/3.625:1 Ratio
-Paxson Scrap Winder:
Hydraulic Motor Drive
Push button scrap ball dump
Hydraulic level wind
24" W x 30" Dia. Capacity scrap ball
-Pit Cross Over Table:
-Tension Stand: Royalton
Combination Roll and Pad Type
Pad unit, hydraulic cylinder raise and lower
Tension by air bag on the bottom
16" dia. x 40" face urethane tension rolls
Dual air brakes, drive shafts to the rolls
Entry Separator Tooling Bar
Exit feed up table
Exit steel pass line rolls, 42" face
-Recoiler:
16" Dia. Drum with Pads for 20" Dia.
Manual Clamp and Expansion
70" Max. O.D.
Hydraulic Pushoff
Overarm Separator
50 HP DC Motor, 850 to 2500 RPM, 500 V, w/Blower
Holding Brake
Nuttall Gear Reducer w/14.6:1 ratio
-Exit Coil Car/Upender:
Hydraulic Cylinder for Tipping
"V" Cradle, 51" long
Twin Hydraulic Cylinder W/16" Lift
60" wide x 66" long Conveyor Rolls on Flat side
5" slot down the middle of the conveyor rolls
Hydraulic Motor Driven for Traversing
-Operators Control Panels:
-Parker DC Integrator Drives:
-Removed and in Storage: Toledo, OH.
Get Your Price from D & H Machinery Inc!
Buyers Who Viewed This Listing Also Viewed:
36" x 4" Paxson Slitting Line, 30000 lb.
Category: Slitting Lines
Seller: G-2000
Location: Toledo, OH
Mfr: Paxson
Material: CR, Galv, Tin Plate, Silicone, Stainless, Weight Capacity: 30,000 lbs., Width Capacity: 36", Thickness Range: 0.006" to 0.095", Coil I.D.: 16" to 20", Coil O.D.: 72" Entry, 70" Exit, Line Speed: 600 to 1200 FPM, Line Direction: Right to Left, Consisting of the following:, -Entry Coil Car:, Pit Type ...more
36" x 0.135" Paxson, Slitting Line, 20,000 lb., 8-36" width, 20" ID, 62" outside dimension, RL
Category: Slitting Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Paxson
Make: Paxson, Material Width: 8" - 36", Coil Weight: 20,000Lbs, Coil ID: 20", Coil OD: 62", Direction: R - L, Entry L-Type Coil Car, Powered Lift and Traverse, Mandrel Uncoiler, Powered Hold - Down Roll, Powered Expansion, Pneumatic Brake, Sliding Base, Feed Up Motor, Slitting Head., Arbor Diameter: 7", Driven Pinch ...more
36" x 4.5" Yoder slitting line, 15000 lb., .125" thick, uncoiler, slitter, tension stand, recoiler
Category: Slitting Lines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Yoder
Stock # 102190A, Condition Used, Width 36 inches Thickness.125 inches Coil Weight 15000 pounds Arbor Size 4.5 inches 15,000# coil capacity,.008 thru.125 gauge capacity, Uncoiler:, Yoder, 15-1/2” - 18-1/2” hydraulic expansion, 20” ID and 24” ID adapter plates, hydraulic sliding base, air cooled ...more
36" x 7" Wean, slitting line, 20000 lb., 20" ID, 250 FPM, hold down roll, hydraulic expansion, entry pinch roll, keeper arms
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Wean
36" x 7.00" Arbor Wean Slitting Line, Weight Capacity: 20,000lb, Coil ID: 20", Coil Width: 36", Line Speed: 250 FPM, -Mandrel Uncoiler, Hold Down Roll, Hydraulic Expansion, Slide Base, Water Cooled Brake, -Slitter Head, 7" Dia. Arbor x 42" Face, Entry Pinch Roll, Edge Guides, AC Motor Threading Drive, -Scrap Winder ...more
37.4" x 2.76" Kampf, Slitting Line, 11.8" - 41.3" working width, .0003" - .004" thickness, 3" - 6" ID Uncoiler, 33.5" diameter Winder, 600 m/min.
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Kampf
The used 36" Kampf Slitting Line is designed for high-efficiency material processing, especially suitable for slitting applications involving aluminum and foil materials. The machine accommodates a maximum input width of 37.4 inches and produces output widths up to 36.2 inches. This slitting line supports a material ...more
