Manufacturer: Coe Press Equipment
Year: 1995
Max Material Width: 30.00
Max Thickness Capacity: .0900
Stock # 20438
1 / 7
Click to zoom in
1 / 7
For Sale by Element Machinery
Surplus Record Dealer Since 2025
Location: Toledo, OH
Contact Ben McGilvery
Phone Number: 855...> Show Phone Number 855-447-7648
Let the seller know you found their listing on Surplus Record!
Description
Description
Coe 30″ x 0.090″ x 15,000 Lbs Coil Servo Feed Line (Certified Reconditioned)
Element Stock No. 20438
Standard Specifications
Maximum Coil Capacity: 15,000 lbs
Maximum Coil Width: 30”
Material Thickness at Full Width: 0.090” @ 30” Wide
Maximum Material Thickness: 0.125” @ 18” Wide
Material: Mild Steel Only – 40 KSI Maximum Yield
Feed Direction: Right to Left
Power: 480V, 3-Phase, 60 Hz
Serial Number: 11470
Consisting of the following:
Coe Double-End Coil Reel Uncoiler Model No. CPR-DE-PO-15030
Coe Powered Coil Straightener Model No. CPPS-PO-300-30
Coe Press Equipment Single-Side Thread Table Model No. CPTT-30-10
Coe Press Equipment Double-End Coil Reel Uncoiler Model No. CPR-DE-PO-15030
- Double-End Reel
- 20-24” I.D. Expansion Range
- 72” Maximum Coil O.D.
- Three-Leaf Mandrel Pad Assembly
- Hydraulic Coil Reel Mandrel Expansion
- Hydraulic Mandrel Indexing with Locking Pin
- Hydraulic Threading Drive
- Air Brake with Pressure Regulators
- Jog, Forward and Reverse
- Remote Reel Jog Pendant Jog with Coil Cord
- Hydraulic Controls Solenoid Operated
- Manual-Bypass Foot Pedal Release for Mandrel Location
- Full Set of Adjustable Coil Reel Keeper Arms
Coe Press Equipment Powered Coil Straightener Model No. CPPS-PO-300-30
- 4-Position Stock Peeler
- Peeler, Threader, Hold Down Station with Motorized End Wheel
- Entry Stock Width Edge Guides with Self-Centering
- Entry and Exit Powered Coil Straightener Pinch Rolls
- Air-Operated Entry Upper Powered Coil Straightener Pinch Roll Adjustment
- Air-Operated Exit Upper Powered Coil Straightener Pinch Roll Adjustment
- Seven (7) Coil Straightening Rolls, 3” O.D.
- 3-Over-4 Configuration with First/Last Lower Rolls Doubling as Pinch Rolls
- Individual Upper Coil Straightening Roll Adjustments
- Automatic Grease Lube System
- Hand Held Pendant Control for Jog Forward and Reverse
- New 10 HP VFD Variable Speed Powered Coil Straightener Drive System
- Exit Cascade Loop Support Rollers
- New Ultrasonic Loop Control System
Coe Press Equipment Single-Side Thread Table Model No. CPTT-30-10
- 10ft Long Threading Table
- 30” Wide, Single Side
- Bomb Bay Style
- Air Raise and Lower with Limit Switch Integration
OPTIONAL New Coe Press Equipment Servo Roll Feed No. CPRF-S330
- 3” O.D. Upper and Lower Servo Feed Rolls
- Air-Operated Upper Servo Feed Roll Lift and Pilot Release
- Adjustable Stock Width Edge Guides with Self-Centering
- Entry Cascade Loop Support Rollers
- Free-Standing Cabinet Base with Adjustable Pass Line Height
- Passline: TBD (Standard 49” Pass Height +/- 5”)
- AC Servo Roll Feed Drive and Controls
- Job Memory Micro Adjust Batch Count
- New Free-Standing Sloped Front Servo Roll Feed Control Console
- Remote Pendant Control for Jog Forward and Reverse
- Feed Angle: 180 and 240 Degrees
- Maximum Speed: 367 FPM
- Maximum Acceleration: 55 FPS
- PRICE: $50,000
Get Your Price from Element Machinery!
Buyers Who Viewed This Listing Also Viewed:
30" x 0.2" -.170" x 10000 lb. Rowe Feed Line, 30" x .170", L-R, Uncoiler, Roll Feeder Straighener w/ Peeler, Carryover Table
Category: Press Feed Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Rowe
30" x.170" x 10,000 LBS Rowe Feed Line, Manufacturer - Rowe, Strip Width - 30", Strip Thickness -.020" -.170" (Mild Steel), Coil Weight - 10,000 LBS, Configuration - L - R, Consisting Of:, Rowe Model #10030-DSJ Uncoiler, 30" x 10K Capacity, Overarm Holddown Roll, Rowe Model #C6-30 7 Roll Feeder Straighener w/ Peeler ...more
10" x. .100" Benchmaster #910, vari-cycle press feed line, 1.5"-2.5" pinch roll diameter, 100 FPM
Category: Press Feed Lines
Seller: Alma Machinery Co-Columbia TN
Location: Columbia, TN
Mfr: Benchmaster
Model: 910
84" x .09" Verson, PressLine, 400 ton, 108" x 186" Bed, 12" Stroke, 58" shut height, 10" adjustment, 75000 lb. coil, .020" - .090" Gauge Range, 8 - 24 SPM, 300 FPM
Category: Press Feed Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Verson
, Manufacturer: PM / Verson, Width Capacity: 84", Max Coil Weight: 75,000:, Max line Speed: 300 feet per minute, Gauge Range:.020” to.090”, Press Capacities:, -Tonnage: 500, -Bed Size: 108” x 186”, -Stroke:12", -Shut Height: 58", -Adjustment:10", -Strokes per minute: 8 to 24, Line Includes: ...more
Cauffiel Leveling Press
Category: Press Feed Lines
Seller: Plant Engineering Services Inc
Location: dallas, TX
Mfr: Cauffiel
12" Minster #20-12, press feed line, 60 ton, (2) Littell double end uncoilers, 13.5"-20.5" manual expansion
Category: Press Feed Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Minster
Model: 20-12
12" Wide Minster Press Feed Line -(2) Littell Double End Uncoilers: 2,000# x 12" Wide Capacity each side Model: 20-12 Manual Expansion: 13.50" - 20.50" Air Drag Brake 60" Maximum Coil OD -(2) Minster Motorized Coil Straighteners: -(2) Minster High Speed Mechanical Presses: Minster: Model P2-60 Capacity: 60 Ton 0 - 500 ...more
