Struthers Thermoflood Steam Generator 62.5 MMBtu/hr., 1600 psi, refurbished 2017

Struthers Thermoflood 62.5 mmbtu Steam Generator with Coen Burner

Coen QLN 2 Ultra Low NOx Burner
Fully Refurbished in 2017, been sitting since 2019 , needs some electrical rewiring.

RADIANT SECTION
General Specifications
Heating surface Approx. 2125 Sq/Ft
Internal Tubes ASME SA-106B-B, Sch 80 (3.5” OD x 0.300” Thickness)
MAWP 1,600 PSIG
Flanges ANSI 1500#
Single-Flow Configuration Single pass
Coating Steam Generator externally coated with a primer and Sand Dunes top coat.
Year Built. 1981 / Fully Refurbished 2017

CONVECTION SECTION
General Specifications
a- Heating surface Approx. 7590 Sq/Ft
b- Internal Tubes ASME SA-106B-B,
Sch 80 (3.5” OD x 0.300” Thk)
MAWP 1,600 PSIG
Flanges ANSI 1500#
Flow Configuration Single passe
Surface Prep & Coating Externally coated with a primer and high heat black top coat

Transition and Stack Sections and FGR line
a- The Transition Section is Square to Round fabricated out of 1/4” thk SA36 plate material.
b- The Transition Section is bolted type / attached to the Radiant and Convection Box.
c- The Transition Section is insulated 8-lb 2300 deg folded ceramic fiber modules on the top and sides. The bottom is insulated with 2600 deg castable refractory.
d- The 36” OD x 20’ high vent stack is bolted type / attached to the Convection Section made out A36 material.
e- This unit is equipped with FGR (Flue Gas Recirculation line) That improves the efficiency of the Unit.
f- The Convection and Stack Section are coated with a primer and high heat black top coat.

HEAT EXCHANGER
Qty 1 – Two Pass Feed Water Heat Exchangers
MAWP – 1,600 PSIG
Constructed per ASME Sec VIII div I from 4”-Sch 80, SA-106-B SMLS pipe and SA-234-WPB fittings.
Inlet and outlet connections to be 3”-1500# flanges.
Heat Exchanger is supported by a wide flange frame.

BURNER:
FOR 62.5 MM Btu/Hr SINGLE PASS STEAM GENERATOR
Coen Ultra Low Nox 62.5 MMBTU/HR Burner with Blower

ASKING $400,000 as is
or
$825,000 FOB turn key read to go to work