1 / 6
Click to zoom in
1 / 6
For Sale by Wheeler Machinery Sales
Surplus Record Dealer Since 1998
Location: Pomona, CA
Contact Dan Wheeler
Phone Number: 909...> Show Phone Number 909-348-5610
Let the seller know you found their listing on Surplus Record!
$14,500 USD
Finance for as low as $294/mth 
Description
Summit 20-4 x 80 Gap Bed Engine Lathe #7370 #2
GENERAL SPECIFICATIONS:
Swing Over Bed: 20-1/4"
Swing Over Gap: 27-5/8"
Swing Over Cross Slide: 11-7/8"
Distance Between Centers: 80"
Spindle Speeds: (15) 11.5 - 1400 RPM
Hole Through Spindle: 4-1/8"
Spindle Nose: D1-8 Camlock
Threads: (64) 1/4 - 60 TPI
Metric Threads: (64) .5 - 120
Longitudinal Feeds: (124) .00145 - .44474
Cross Feeds: (56) .0007 - .22237
Cross Slide Travel: 11-3/8"
Compound Rest Travel: 5-3/8"
Tailstock Spindle Travel: 9-1/2"
Tailstock Spindle Taper: No. 4 M.T.
Bed Width: 15-3/4"
EQUIPPED WITH:
10 HP Motor
Inch/Metric Threads w/Single Switch Lever
Hardened and Ground Bed Ways
12" 3-Jaw Chuck w/2 Piece Jaws
Taper Attachment, +/- 10 Degrees, 15-3/4" Maximum Turning Length Per Setting
Thread Dial
Four Way Rapid Traverse
Two Speed Tailstock
Force Lubrication To Headstock, Carriage, and Bedways
Coolant System
Full Length Splash Guard
GENERAL SPECIFICATIONS:
Swing Over Bed: 20-1/4"
Swing Over Gap: 27-5/8"
Swing Over Cross Slide: 11-7/8"
Distance Between Centers: 80"
Spindle Speeds: (15) 11.5 - 1400 RPM
Hole Through Spindle: 4-1/8"
Spindle Nose: D1-8 Camlock
Threads: (64) 1/4 - 60 TPI
Metric Threads: (64) .5 - 120
Longitudinal Feeds: (124) .00145 - .44474
Cross Feeds: (56) .0007 - .22237
Cross Slide Travel: 11-3/8"
Compound Rest Travel: 5-3/8"
Tailstock Spindle Travel: 9-1/2"
Tailstock Spindle Taper: No. 4 M.T.
Bed Width: 15-3/4"
EQUIPPED WITH:
10 HP Motor
Inch/Metric Threads w/Single Switch Lever
Hardened and Ground Bed Ways
12" 3-Jaw Chuck w/2 Piece Jaws
Taper Attachment, +/- 10 Degrees, 15-3/4" Maximum Turning Length Per Setting
Thread Dial
Four Way Rapid Traverse
Two Speed Tailstock
Force Lubrication To Headstock, Carriage, and Bedways
Coolant System
Full Length Splash Guard
Inquire Further with Wheeler Machinery Sales!
Buyers Who Viewed This Listing Also Viewed:
20"/27" x 80" Summit #20-4x80, 3-jaw 12" chuck, inch/metric, 11-1400 RPM, 4-1/8" hole, 10 HP, 1/2"- 6-1/8" steady rest
Category: Sliding & Gap Bed Lathes
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Summit
Model: 20-4X80
(NEW) SUMMIT PRECISION ENGINE LATHE, MODEL: 20-4 x 80, Swing Over Bed: 20-1/4", Swing Over Gap: 27-5/8", Swing Over Cross Slide: 11-7/8", Distance Between Centers: 80", Spindle Speeds: (15) 11.5 - 1400 RPM, Hole Through Spindle: 4-1/8", Spindle Nose: D1-8 Camlock, Threads: (64) 1/4 - 60 TPI, Metric Threads: (64).5 - ...more
20"/26" x 80" Victor #2080G, gap bed engine lathe, 3-1/8" bore, D1-8 Camlock, 30-1800 RPM, 10 HP, 8" 3-jaw chuck, inch/metric, tailstock
Category: Sliding & Gap Bed Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Victor
Model: 2080G
Spec Sheet:, The Victor 2080G is a heavy-duty gap bed engine lathe designed for precision, featuring a 20-inch swing over the bed and 80 inches between centers, often found in industrial, maintenance, and toolroom environments., The "G" designation indicates a removable gap section, allowing for a larger, short-length ...more
20" x 80" GMC #GML-2080, gap bed engine lathe, 29-1/8" swing, 3-1/8" bore, 10 HP, 220 V., 2025
Category: Sliding & Gap Bed Lathes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: GML-2080
Year: 2025
2025 GMC GML-2080 GAP BED ENGINE LATHE AS NEW #8201, DISCLAIMER, Please note this machine is incompatible with the use of a rotary phase converter. Any attempt to purchase, install, or employ one, whether carried out by you or a professional service company, will automatically void the warranty. It is crucial to ...more
20"/24" x 80" Hyson-Tuda, engine lathe, 12" 3-jaw chuck, 15" 4-jaw chuck, 3-1/8" hole, 4-way toolpost, 9" Steady Rest, A2-8, Trav-A-Dial
Category: Sliding & Gap Bed Lathes
Seller: Greenway & Associates Ltd
Location: Orange City, IA
, 12 3 jaw chuck, 15 4 jaw chuck, 4 way tool post, 9 steady rest, Coolant, Removable chip pans, Foot brake, Trav-a-dial, Live center in tailstock.
20" x 80" GMC #GML-2080, Heavy Duty Gap Bed Lathe, 12" width Bed, 10" 3-Jaw & 12" 4-Jaw Chucks, 3.125" Spindle Bore, 10 HP, 25-1800 RPM, 220/440 V, new
Category: Sliding & Gap Bed Lathes
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Gmc
Model: GML-2080
GMC 20″ x 80″ Heavy Duty Gap Bed Lathe, GML-2080, Inventory # 9355, Model: GML-2080, Max. Swing Over Bed: 20″, Max. Length of Workpiece: 80″, Max. Swing Over Cross Slide: 12 1/2″, Max. Swing in Gap: 29 1/8″, Width of Bed: 12″, Effective Length in Gap to Spindle: 6″ ...more
