The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

1800 Ton, Lombard, 150/203mm billet diameter, 1.5-38mm/sec extrusion speed, #12457

Manufacturer Lombard
Ton 1800
Stock # 12457

For Sale by Machinery International Corp

Platinum Level Dealer
Surplus Record Dealer Since 1945


MACHINE # 12457
Billet heater
Make: Maker unknown but utilizes all North
American burner equipment. All gas
train equipment fitted during recent
Year: Manufactured in 1973 and had a major
refurbishment in 1987.
Type: Natural Gas Fired Reverberator Furnace
Current Operating Rate: 1.64 tons/hr. (150 mm Dia. Billet)
Electrical Specification: 415 Volt 3 Phase 50 Hz
Extrusion Press
Maker: Lombard
Type: 4 column, Gatelock type Rod Press
Year: 1958 and refurbished in 1997 with new
PLC, controls and video monitoring
Extrusion 1800 US tons @ 3000 psi
Closing 134 US tons @ 3000 psi
Return 80 US tons @ 3000 psi
Container Seal 80 US tons @ 3000 psi
Container Open 134 US tons @ 3000 psi
Butt Shear 67 US tons @ 3000 psi
Extrusion speed 1.5 to 38mm/sec
Billet Size : Currently configured for 150mm and
203mm billet. Maximum size available
is 203mm.
Billet Length (maximum): 584mm
Hydraulics: Oilgear
3 main pumps Variable Delivery Oilgear
DV 150. 3 x 200 HP main drive motors.
Electrical Connection: 415 V 3 Phase 50 Hz
Container Heating 30kW
Die Stack: 305mm dia x 213 thick
Electrical Control Omron PLC with PC graphics screen
and press monitor
Major Tools: 3 x Containers and 3 x stems for
150mm billets.
1 x Container and 2 x stems for
203mm dia billet.
Please note that this press is suitable for extrusion of both aluminum and
Runout Equipment
Initial Table
Single Coiler
Runout Table
Cross transfer table
Saw feed conveyor
Cold product cut to length saw
Coil conveyor
Coil final quench tank
Back end testing device for coil (Nick and Break)
Coil removal capstan
Runout Table: Effective length 30m
Width 400mm
Cast Iron cooling plates
Cooling Table: Effective length 30m
Width of Cooling table 2700mm
Saw Charge Table: Length 25m
Width 400mm
Cutting saw : Donaldson Saw
Range 150mm h x 75mm w (approx.)
Motor 10 HP
Saw Gauge Table: Length 6300mm
Width 400mm
Cutting length range 1600mm- 6300mm
Coiler: Single unit
Drum Size 905mm OD x 618mm ID
Depth 250mm
Drive 1x_.kW MicroDrive variable
speed AC motor drive
Coiler to suit Wire 3.6mm - 20mm dia
Flat to 25.4mm x 3.2mm
Complete with coil off-take conveyor, final water quench unit and nick and
break back end test unit
Electrical Connection: 415V 3 Phase 50 Hz
Ancillary Press Equipment
Comprising : Electric Die Oven - ___kW
1 t electric jib hoist for
tool loading
Die grit blasting machine
Pedestal drill
Tool assembly tables
Tool racks

Submit Inquiry to Machinery International Corp

  • This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

  • Hidden