1 / 9
Click to zoom in
1 / 9
For Sale by Smith Machinery Co
Surplus Record Dealer Since 2001
Location: Ames, IA
Contact Jim Smith
Phone Number: 515...> Show Phone Number 515-233-6330
Let the seller know you found their listing on Surplus Record!
Description
Specifications
Equipped With
Equipped With
| Saw | Pivot Style, Horizontal Band Saw |
| Saw Capacity | 12.75" W x 8" H (11.75" Square 12.75" Round) |
| Arm Lift | Powered from control console. |
| Blade Size | 1 x 1210 x .035 THK |
| Blade Drive | 3 HP, 220V (12 amps)/3PH or 440V (6 amps)/3PH Electrical Motor Requirement. 220V or 440V AC to be specified by the customer at the time of order. 1800 rpm, ball bearing TFC. (***The customer must ground this saw at the machine with an earth ground rod installed prior to installation for the warranty to be in effect.***) |
| Blade Speed | Infinitely variable speed drive controlled through a variable frequency controller and speed is changed from LED readout on console. |
| Air Requirements | 85 PSI, 4 6 CFM, equipped with air filter/lubricator |
| Operator Control | Control Console is located on top of the saw arm for operator convenience. Saw may be operated in semi-automatic mode or fully automatic mode. |
| Automatic 0-24 Stroke Bar-Feed (1 Index) | Automatic floating (self-adjusting) shuttle vise feed system with additional rollers to prevent binding of crooked and distorted material. The table is 6 long with a 0-24 feed stroke. |
| Discharge Table | 18 Solid Discharge Support |
| Adjustable Main Vise | Main-clamping vise is air powered and non-cocking. |
| Vise Clamping Pressure | The operator controls the variable vise pressure, adjustable to clamp various metals. |
| Cutting Pressure | Adjustable cutting pressure/force to control the weight to be placed on the teeth of the blade. |
| Cutting Rate | Adjustable to regulate the saw arm traverse rate. This is a necessary feature to cut tubing at high rates without losing saw teeth. |
| Carbide Blade Guides | Side and back carbides are flat for maximum blade support. |
| Blade Chip Brush | Powered brush driven by an assembly mounted on the drive wheel removes chips that may become lodged in the blade gullets. |
| Hold-Down Fixtures | Two each hold down fixtures that mount one on the main vise and one on the shuttle vise for use when cutting more than one piece at a time. |
| Parts Selector/Counter | Use the Parts Selector/Counter to select the number of parts that will be cut. The counter will count down the parts as each one is cut |
| Built-In Coolant System | Machine is set up for flood-style coolant system with coolant dispensed through the guide arms. The saw is fully panned to return coolant to the tank. |
| Wash-Down Hose | A cutting fluid clean-up hose is provided for machine wash down. |
| Blade Break Switch | Saw will automatically shut off if the blade breaks. |
| Out-of-Stock Switch | The saw shuts off when the automatic feed system is out of stock, or when the pre-determined number of pieces has been cut. |
| Safety Guards | Machine is equipped with blade guards and awareness barriers for safety purposes. |
Equipped With
Equipped With
NOTES:
SPECIFICATIONS SUBJECT TO VERIFICATION
OPTIONAL FEATURES:
24” Solid Discharge Table: For handling of material after the cut. Price: $1,695.00
DELIVERY:
SUBJECT TO STOCK
SPECIFICATIONS SUBJECT TO VERIFICATION
OPTIONAL FEATURES:
24” Solid Discharge Table: For handling of material after the cut. Price: $1,695.00
DELIVERY:
SUBJECT TO STOCK
Get Your Price from Smith Machinery Co!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
12-3/4" x 12-3/4" Kalamazoo #KC12AX, automatic hydraulic horizontal band saw, 95-395 FPM, 2016
Category: Horizontal Band Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kalamazoo
Model: KC12AX
Year: 2016
SERIAL. H10514172, MODEL. KC12AX, YEAR NEW. 2016, CUTTING CAPACITY RECTANGLE. 12.75" X 12.6", CUTTING CAPACITY ROUND. 12-3/4", BLADE SPEEDS, VARIABLE. 95 TO 395 FPM, BLADE SIZE. 1-1/4" X.035" X 12'6", SHUTTLE FEED LENGTH. 15-3/4" MAXIMUM, SHUTTLE CYCLES. 1 TO 9 (141.75" MAX.), HYDRAULIC VISES. YES, BLADE SPEED ...more
12.75" x 12.75" HEM #H101A, Automatic Horizontal Band Saw, 5 HP, 220/440V, 3 Ph, Variable Speed
Category: Horizontal Band Saws
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Hem
Model: H101A
Year: 1994
Make: HEM, Model: H101A, Year: 1994, Machine Location: Illinois, Horsepower: 5 Hp, Electrical: 220v / 440v (3-Phase), Amperage: 14 A (At 220v) / 7 A (At 440v), Air Requirements: 85 Psi, Cutting Capacity & Blade, Max Capacity (Round): 12.75″, Max Capacity (Flat/Square): 12″ X 12″, Blade Size: ...more
12.75" x 12.75" HEM #H90A, Automatic Horizontal Band Saw, 1" width x 154" L x 0.035" thick Blade, 0-24" Bar Feed, 3 HP, 2003
Category: Horizontal Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hem
Model: H90A
Year: 2003
Spec, HEM H90A.
12.75" x 12.75" Hem #H90A-4, horizontal bandsaw, 3 HP, 12'10"L x 1" H x .035" blade, automatic barfeed, programmable Control, 2012
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Hem
Model: H90A-4
Year: 2012
12.75" x 12.75" HEM #H90A-B/F, semi automatic band saw, 220/440 V., 154" x 1" x 0.035" blade, variable speed 60-300 FPM, 3 hp
Category: Horizontal Band Saws
Seller: Dominion Air & Machinery Co
Location: Roanoke, VA
Mfr: Hem
Model: H90A-B/F
