Manufacturer: Stamco
Year: 1981
Width: .0
Arbor or Max Thickness: 72.000
Lbs.: 22000
Stock # VX-36016
1 / 10
Click to zoom in
1 / 10
For Sale by VX Machinery
Surplus Record Dealer Since 1995
Location: Sylvania, OH
Contact Victor Van Deilen
Phone Number: 734...> Show Phone Number 734-854-8700
Let the seller know you found their listing on Surplus Record!
Description
Slitting Capacity:
8 Cuts at 0.050" Thickness at 1,000 FPM
10 Cuts at 0.036" Thickness at 1,000 FPM
13 Cuts at 0.024" Thickness at 2,000 FPM
21 Cuts at 0.010" Thickness at 2,000 FPM
Electrical:
Main Power: 415V / 3 Phase / 50 Hz
Control Voltage: 110 VAC
Drives, PLC and Main Operator Control Panel Upgraded in 2017
Right to Left 96" (2400 mm) 20" (508 mm) 0.008" (0.20 mm) 0.050" (1.27 mm) 72" (1828 mm) 78" (1981 mm) 1,000 FPM (304 MPM) 2,000 FPM (609 MPM) 49 FPM (15 MPM) 110 VAC
8 Cuts at 0.050" Thickness at 1,000 FPM
10 Cuts at 0.036" Thickness at 1,000 FPM
13 Cuts at 0.024" Thickness at 2,000 FPM
21 Cuts at 0.010" Thickness at 2,000 FPM
Electrical:
Main Power: 415V / 3 Phase / 50 Hz
Control Voltage: 110 VAC
Drives, PLC and Main Operator Control Panel Upgraded in 2017
Get Your Price from VX Machinery!
Buyers Who Viewed This Listing Also Viewed:
8" x .062" Stanat Design slitting line w/banding line, 2000 lb., mandrel uncoiler, slitting head
Category: Slitting Lines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Stanat
Brand STANAT, Stock #102068A, Condition Used, Width 8 inches, Thickness.062 inches, Capacity 2000 pounds, Gauge Range: 0.001" -.062", Complete Line with The Following:, Mandrel Uncoiler, Slitting Head, Entry Guide Parallel Adjustment of Top Arbor, Arbor Diameter: 2.625", Knife Diameter: 7", Spacer Diameter: 4.5" ...more
9" x 2.5" National Standard, pull thru line, dual recoilers, L to R
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: National
National Standard Slitting Line, Pull Thru Slitting Line with Dual Takeups, -Capacity:, Material Width: 9", Thickness Range: 0.020" (0.508mm) - 0.062" (1.57mm), Number of Cuts: 9 Cuts 0.020" (0.508mm) approx., 6 Cuts 0.062" (1.57mm) approx., Line Direction: Left to Right, Consisting of:, -Uncoiler:, Type: Non-Driven ...more
10" x 2-5/8" National Standard slitting line, finger set up, #12674
Category: Slitting Lines
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: National
MACHINE# 12674, MANUFACTURER: NATIONAL STANDARD, TYPE SLITTER: PULL THRU FINGER SET UP, ARBOR SIZE: 10" (254mm) x 2 1/2" (63.5mm), CAPACITY:, THICKNESS RANGE: 0.005" (.127mm) - 0.062" (1.6mm), NUMBER OF CUTS: 9 CUTS 0.005" (.127mm) - 6 CUTS.062" (1.6mm), DRIVE MOTOR: 15 HP REEVES, 44/22 AMPS ...more
10" x 4" Ruesch, Ring Slitter, 11" face width, entry guides
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ruesch
ITH BLADES, -MANUFACTURER: RUESCH, -TYPE: RING SLITTER, -SIZE: 10" (254mm) WIDE, -ARBOR, -DIAMETER: 4" (101.6mm), -FACE WIDTH: 11" (279.4mm), -DRIVE MOTOR: ELECTRIC GEARMOTOR, 7 1/2" HP (5.6Kw) 1760 RPM, 220/440 VOLT 3 PHASE 60 HERTZ, 20.6/10.3 AMPS, 58.62/1 RATIO, NOTE: SLITTER IS ENTRY GUIDES., -WINDER, -TYPE: ...more
12" x 4" N Ferrara #2187/4SH-75-5TR-V-R29-0107, 4" hi precision slit.line w/traverse winder
Category: Slitting Lines
Seller: N Ferrara Inc
Location: Somerset, MA
Mfr: N Ferrara
Model: 2187/4SH-75-5TR-
-Material: Gold, Silver, Steel, Brass, Wire Mesh, Copper, -Traverse Winder: 203,000' Cap. Max., -Starting Width: 3'' Maximum, -Thickness Range:.012"Wide min 0.002''/0.020'', -Weight Capacity: 90 lbs Maximum per coiler, -Speed Range: 0-500 F.P.M., -Volts: 220, -PH: 3, -CY: 60, Uncoiler ...more
