Buy or Sell Your 600 Ton Presses

Betenbender 12′ x 300 Tons Hydraulic Press Brake, 12-300T – SALE PENDING 05/19/2026, Inventory # 10051-P, Model: 12-300T, S/N: 89902 “2002”, Max. Tonnage: 300 Tons, Bed Length: 144 1/2″, Bed Width: 6″, Distance Between Housings: 126 1/2″, Stroke: 6″, Open Height: ...more

NIAGARA 60 TON OBI PRESS, STOCK #14435J, MDL# M-60, S/N# 52376, NEW 1985, CAPACITY 60 TON, STROKE 6", SHUT HEIGHT 19.25", SLIDE ADJUSTMENT 3.5" (MOTORIZED ), BED AREA 32" LR X 21" FB, SLIDE AREA 21" LR X 16" FB, SPEED 100 SPM, OAD 54" LRX 90 FB X 128" T, APPROX WEIGHT 10,000 LBS, EQ WITH :, AIR CLUTCH AND BRAKE, LINK ...more

ONE PREOWNED 2000 TON AJAX FORGING PRESS, NEW IN 1975, • 2000 Tons Capacity, • 12 " Stroke, • 39" Shut Height, • 58 SPM, • Ram: 42" x 42", • Bed: 52" x 46", • Flywheel Speed: 262 RPM, • 150 HP @ 1200 RPM Main Motor, • Has Bottom Wedge Adjustment ...more

Boost your production with this Prima Power eP-1030 electric press brake (2016), designed for high-precision, energy-efficient sheet metal bending. Ideal for small-to-medium batches, it delivers fast, accurate, and consistent results. Green Means technology reduces energy use and CO2 emissions. Perfect for versatile ...more

150 TON FERRACUTE KNUCKLE JOINT PRESS, Manufacturer - Ferracute, Model number - EQ 151, Serial number - 24598, Type - knucke joint, Tonnage - 150 ton, Strokes per minute - 70, Open height - 14-1/2", Stroke - 2", Shutheight - 12-1/2", Adjustment- 1/2", Motor - 7-1/2 hp, 1800 rpm, Includes:, Air clutch, Dial feed, Press ...more

1000 TON X 20' CINCINNATI HYDRAULIC PRESS BRAKE, CAPACITY.: 1000 TON, BED LENGTH.: 20', DISTANCE BETWEEN HOUSINGS.: 16'6", STANDARD STROKE.: 12", OPEN HEIGHT.: 22", CLOSED HEIGHT.: 10", RAPID ADVANCE.: 85 IPM, FAST PRESS.: 47 IPM, FULL TONNAGE PRESS.: 20 IPM, RETURN SPEED.: 35 IPM, FAST RETURN.: 65 IPM ...more

Tonnage Capacity (U.S. Short Ton): 60 TonAdjustable Stroke: 0.625" - 2.5" (7 Positions)Stroke Speed: 100 - 1120 SPMRam Adjustment: 2.5"Shut Height (w/ 0.625" Stroke Length): 13” - 15.6”Shut Height (w/ 2" Stroke Length): 12.3” - 14.9”Lower Clamping Plate (R-L x F-B): 37" x 25.6"Upper Clamping ...more

Capacity 1,500 Ton x 36' Distance Between Housings 22'-6" Open Height 24" Ram Speeds Rapid Advance 46 IPM Fast Press 25 IPM Full Tonnage Press 10 IPM Return Speed 19 IPM Fast Return 34 IPM Horsepower 60 H.P. WEIGHT 300,000 Lbs. s Disassembled By Cincinnati, Inc. Located In Philadelphia, PA..

CAPACITY:400 TON STROKE:14" SHUT HEIGHT TO BED:24" (SDAU - OVER BOLSTER) BED AREA:60" X 42" (RL X FB) SPEED:25 - 45 SPM (VARIABLE) RAM ADJUSTMENT:14" (MOTORIZED) RAM AREA:60" RL X 42" FB (T-SLOTTED) BOLSTER SIZE:10" TH X 60" RL X 42" FB (T-SLOTTED) WINDOW SIZE:25" FB X 25" H (APPROX) DIST UPRIGHTS / FLOOR TO BED:61" / ...more

Tonnage 150, Stroke 5 inches, Shut Height 21 inches, Adjustment 4 inches, Bed Size 48" x 40", Ram Area 48" x 23", SPM 0-150, Standard, 150-ton Highspeed Minster Press, Model #P2-150-48 "Piece-Maker", Serial Number 24688, 150-ton Capacity, 5" Stroke, 21" Shut Height, 4" Motorized Adjustment, 48" LR x 40" FB Bed Area ...more

Tonnage: 700, Strokes Per Min: 8-60, Stroke: 15.75", Slide Adjustment: 9.8, SPM: F-B 55" x L-R 142", Bolster Size: F-B 55" x L-R 142", Ram size: F-B 55" x L-R 142", Max Upper Die Weight: 13,240 lbs, Shut Height: 35.4", Feed Direction: R-L, Press Window: 37" x 67.5" (W x H), Feeder Type: Roll, Coil Cradle or Reel: ...more

CAPACITY60 TON STROKE6" MAX SHUT HEIGHT TO BEDAPPROX. 16" SDAU BED AREA37" RL X 32" FB SPEED40 - 80 SPM SLIDE ADJUSTMENT3" MANUAL SLIDE AREA22" RL X 15" FB (T-SLOTTED) BOLSTER PLATE2.25" H X 37" RL X 32" FB DISTANCE BETWEEN UPRIGHTS24.25" DISTANCE FLOOR TO BED32" CLUTCHEATON AIRFLEX CLUTCH & BRAKE ELECTRICS7.5 HP ...more

SERIAL. 722930, MODEL. 110BH08, YEAR. 1972, CAPACITY. 110 TONS, LENGTH OF RAM & BED. 98", DISTANCE BETWEEN SIDE HOUSINGS. 80", STROKE. 6", ADJUSTMENT, MECHANICAL. 3/4" TO 8", OPEN HEIGHT. 13-3/4" MAXIMUM, BED WIDTH. 7-3/4", APPROACH SPEED. 3.9 IPS, WORKING SPEED.62 IPS, RETURN SPEED. 2.4 IPS, MOTOR. 12 HP.

SERIAL. ATP80-7133-ASS-03, MODEL. ATP-5555, YEAR NEW. 2019, IMPACT CAPACITY. 120 TON, HOLDING TONNAGE. 80 TON, AREA OF BED. 55" X 55", AREA BETWEEN PINS. 46" X 46", STROKE.5 TO 3", OPEN HEIGHT. 15.75", LOWER BED PLATE. 5", TOP PLATE. 3.75", RAM PLATE. 3.75", AIR TANKS. 2 @ 28 GALLONS, RAMS STOPS. 4, ** 3 PRESSES IN ...more

Capacity: 150 TonStroke: 4"Shut Height: 20"Slide Adjustment: 4"Bed Area: 48" x 40"Slide Area: 45"x 30"Windows: 20" WideSpeed: 100 - 200 SPM, Omnilink II 5000 Control (New 2014)CWP SMXSE24 24" x.093" Press Mounted Servo FeedAccra Wire Controls F-300AF 7,000 lbs Pallet UncoilerAir Clutch and BrakeAir ...more

CQ Ironworker The CQ Ironworkers are the result of collaboration between COMEQ with over 45 years experience and over 15.000 Ironworkers sold in the US, and Durmlazar one of the leading manufacturers of fabrication equipment in the world., Al CQ-Ironworker series models are Dual Cylinder independent Punch and Shear ...more

110 Ton Bliss OBI Press, Stk# 12438J S/N H{-45356 Year: 1967, CAPACITY: 110 TON, STROKE: 6", SHUT HEIGHT: 21", RAM ADJUSTMENT: 4", SPEED:, BED AREA: 42" L-R X 27" F-B, RAM AREA: 28" L-R X 22" F-B, OPENING THROUGH BACK: 24-1/2", O.A.D.: 88" L-R X 102" F-B X 149" T, APPROX WEIGHT: 25,000 LBS, BACK GEARED DESIGN, AIR ...more

Make: LVD, Model: 150-JS-10, Year: 1995, Machine Location: Illinois, Tonnage: 150 Tons, Overall Length: 10ft, Distance Between Housings: 8’6″, Stroke: 7.9″, Open Height: 15.75″, Throat Depth: 15.75″, Rapid Approach: 368 IPM, Press Speed: 2 – 59 IPM, Return Speed: 326 IPM, Approx ...more

SERIAL. 12354, MODEL. 60-BG-AC, CAPACITY. 60 TON, STROKE OF SLIDE. 4", RAM ADJUSTMENT. 3-1/2", SHUT HEIGHT OVER BED (SDAU). 12-1/4", AREA OF BED. 32" X 21", AREA OF RAM. 13" X 11", STROKES PER MINUTE. 47, HOLE THRU BACK. 15-1/2", BOLSTER. 32" X 21" X 1-1/2", DUAL PALM BUTTONS. YES, AIR CLUTCH & BRAKE. YES ...more

ACCURPESS 713010 130 Ton x 10’ Hydraulic Press Brake #8231, ImperialMetricTonnage 130 T 117.934 t Type HYD HYD Overall Length 10' 3 m Between Housings 100" 2.5 m # Axis 2 2 Dimensions 143” x 53” x 84” H 143” x 53” x 84” H Weight 15000 Lbs. 15000 Lbs. ACCURPESS 713010 ...more

300 TON X 12' BETENBENDER HYDRAULIC PRESS BRAKEPRICE: Loaded on Truck, Our Warehouse, York, PA …… $74,500.00, HMC Stock # 26002-P, Serial No.: 89902, Model: 12-300T, Year: 2002, Maximum Tonnage: 300, Bed Length: 144-1/2", Bed Width: 6", Distance between Housings: 126-1/2", Stroke: 6", Open Height: ...more

CAPACITY300 tONS @ 1/2" OFF BOTTOM STROKE5" MAX SHUT HEIGHT TO BED23" (SDAU) BED AREA72" X 48" (rl x FB) SPEED55 - 110 SPM slide adjustment6" (MOTORIZED) slide area72" RL X 48" FB (T-SLOTTED) - rebuilt slide BOLSTER PLATE6.5" H X 72" RL X 48" FB DISTANCE BETWEEN UPRIGHTS79" DISTANCE BETWEEN OIL CATCHERS73" FLOOR TO ...more

THIS DAKE 6-650 H FRAME SHOP PRESS IS A 150 TON AIR-OVER-HYDRAULIC PRESS DESIGNED FOR FABRICATING AND PRESSING APPLICATIONS. IT OPERATES WITH AN AIR PRESSURE REQUIREMENT OF 90-125 PSI. THE PRESS HAS OVERALL BASE DIMENSIONS OF 66 INCHES BY 42 INCHES AND A HEIGHT OF 95 INCHES, WITH A TOTAL WEIGHT OF 3,000 LBS. KEY ...more

TONNAGE.6500 TONS, STROKE OF RAM.34", DISTANCE TOP OF BOLSTER TO FACE OF SLIDE WITH STROKE UP56.5", DRAW DEPTH.12", WORKING PRESSURE ON RUBBER PAD - MAX10,000-PSI, FORMING AREA - MAX. 10,000-PSI 1269 SQ. INCH, FORMING AREA - MAX. 6000-PSI.2115 SQ. INCH, OVERALL HEIGHT OF PRESS.46FT APPRX., HEIGHT OF PRESS ABOVE ...more

Dake 100 Ton H-Frame Press, Force 100, Inventory # 6476, Model: Force 100, Capacity: 100 Tons, Operating Pressure: 15 – 280 Bars, Ram Diameter: 100mm, Ram Travel: 19″, Bore: 180mm, Ram Rapid Advance Speed: 52 IPM, Ram Pressing Speed: 3 IPM, Hydraulic Pump: 3 Centrifugal Pumps, Controls: Panel Mounted ...more

SERIAL. 90114, MODEL. HDE120-12, YEAR NEW. 2006, CAPACITY. 120 TON, BED LENGTH. 144", DISTANCE BETWEEN HOUSINGS. 124", THROAT DEPTH. 9.8", STROKE. 4.7", OPEN HEIGHT. 12.8", CLOSED HEIGHT. 8.1", PASSLINE HEIGHT. 34.4", FAST APPROACH SPEED. 165 IPM, FAST RETURN SPEED. 142 IPM, PRESS SPEED. 17 IPM, TONNAGE LIMIT CONTROL. ...more

MODEL: SEP-120, SERIAL #: SEP120-145, 120 TON PUNCH, 1-1/2" HOLE THROUGH 1" MAXIMUM MATERIAL, 5" MAXIMUM HOLE THROUGH 1/4" MATERIAL, 2" STROKE, 21.5" THROAT DEPTH, 12-1/4" OPEN HEIGHT, 10-1/4" CLOSED HEIGHT WITHOUT DIE BLOCK, 20" FB x 10" LR PLATEN TABLE, 16 SPM @ 1", SOME TOOLING, 10 HP MOTOR, 48" x 60" x 72" OVERALL ...more

One (1) used Bussman Simetag Hydaulic Compacting Press Model HPM 200S 220 ton Powder Compacting Press Serial number M1703 3 phase, 60 hertz, 460 voltage Operating manual with drawings Approx. floor space 6' x 8.5" deep x 11'10" This press s the following: Opposed ram design Die set 7.8" lower ...more

CAPACITY. 60 TON, LENGTH OF STROKE. 1.25", SHUT HEIGHT. 9.38" - 11.12", BOLSTER. 36" X 23", ADJUSTMENT. 1.75", RAM PLATE. 36" X 16", S.P.M. 1 - 1000, EST. WEIGHT. 25,000#, O.A. DIMENSIONS. 105" X 54" X 128", MOTOR. 30 HP, 90 VOLTS, 230/460 VOLT 3 PHASE, 78 / 39 AMPS, 1755 RPM (MIN 170, MAX 1680), LUBE SYSTEM, FLOOR ...more

Tonnage 200, Stroke 6 inches, Shut Height 28 inches, Adjustment 9 inches, Bed Size 72" LR x 42" FB, Ram Area 72" LR x 42" FB, SPM 50-100, Standard, Niagara Mechanical Metal Stamping Press, Press Model SC2-200-72-42, 200 ton Metric Capacity Used Press, 220 ton US Capacity Press, 6" Stroke, 28" Shut Height, 9" Motorized ...more

200 TON PRESSMASTER H-FRAME HYD. PRESSMODEL HFP-200 MWH… BRAND NEW RATED CAPACITY, TONNAGE. 200STROKE. 20"BORE. 12" RAM SPEED PRESS. 6 IPMRAM SPEED (Inches/minute) ADVANCE. 24RAM SPEED (Inches/minute) RETURN. 29DISTANCE BETWEEN POSTS (RIGHT TO LEFT). 60"DISTANCE BETWEEN POSTS (FRONT TO BACK). ...more

Product Enerpac 150 Ton H-Frame Hydraulic Shop Press, Maximum Operating Pressure (psi)-10,000 Capacity –150 Tons Maximum Vertical Daylight –48.5″ Maximum Bed Width –48″ Power Source Type-Electric Cylinder Model Number-RR20013 Cylinder Type-Double-Acting, Hydraulic Return Cylinder ...more

THE DAKE MODEL 5-150A IS A 150-TON ELECDRAULIC H-FRAME PRESS DESIGNED FOR FABRICATING AND PRESSING APPLICATIONS. IT OPERATES ON AN ELECTRIC, THREE-PHASE POWER SOURCE (220/440V) DRIVEN BY A 2 HP MOTOR. KEY DIMENSIONS INCLUDE A 48-INCH WIDTH BETWEEN THE UPRIGHTS AND 12-1/4 INCHES BETWEEN THE TABLE CHANNELS. THE WORK ...more

Punch Press, Manufacturer: Rockford Iron Works, Inc. (Rockford, IL), Model No.: 110-W, Serial No.: 6446-72, Year of Manufacture: 1972, Electrics: 440 Volt, 3 Phase, 60 Cycle, Power: Main Motor 15 HP, s and :,.Platen Size: 29" x 22" Bottom x 20" x 28" Top w/ (4) T-Slots,.Capacity: 110 Ton,.Stroke: ...more

Tonnage Capacity: 400 TonPull Up Capacity: 30 TonStroke: 19.7"Daylight: 50"Max. Total Die Weight: 4.8 TonMax. Upper Die Weight: 1.5 TonApproach Speed: 425 IPMPressing Speed - Under 320 Tons: 23.6 IPMPressing Speed - Over 321 Tons: 9 IPMReturn Speed (Fast / Slow): 330 IPM / 141 IPMBolster Area (L-R x F-B): 66.9" x ...more

Capacity.100 Ton, Distance Between Posts. Left to Right: 25" (22 1/2" Post Base at Top of Bed), Distance Between Posts.Front to Back: 19" (16 3/4" Post Base at Top of Bed), Ram Size.32" F.B. x 38" L.R.,T-Slotted, Bed Size. 35" F.B. x 45" L.R., Stroke. 1 1/2 ", Open Height. 21 3/4", Manual Nut Adjustment., Bed Opening. ...more

150 Ton X 12’ Press Brake with Automec CNC Backgauge., Tonnage: 150 Ton, Overall Length: 12’, Distance Between Housings: 124”, Stroke: 4.7”, Open Height: 12.8”, Closed Height: 8.1”, Throat Clearance: 9.8”, Approach Speed: 165” / Min, Form Speed: 18” / Min, Return ...more

Rating 60 tons Stroke 12.25 inches Cylinder (Ram) 4 inches Standard Motor 5 HP 3~ 208 V or 230 V ~ 1,725 RPM ~ 14 A Optional Motors 5 HP 3~ 460 V ~ 1,725 RPM 7 A / 5 HP 1~ 230 V ~ 1,725 RPM 23 A Hydraulic Pump 3-1/2 GPM - 1 Stage Valve Pressure 2,750 PSI Reservoir 7 Gallons Machine Dimensions (Width x Depth x Height) ...more

160 Ton X 12’ Hydraulic Press Brake with Betenbender 2 - Axis Control and Foot Pedal, Capacity: 160 Tons, Bending Length: 144”, Open Height: 14”, Stroke of Ram: 8”, Throat Depth: 8”, Rapid Approach Speed: 68 IPM, Pressing Speed: 31 IPM, Return Speed: 86 IPM, Bed Height: 37”, Motor: ...more

Working Pressure 200 tons Length of Working Table 157.4 inches Distance Between Housings 124 inches Throat Depth 12.5 inches Stroke Adjustment of Ram 2.75 inches Ram Travel 7.0 inches Open Height 17.5 inches Rapid Ram Travel Speed (per second) 2.4 inches Rapid Ram Retreat Speed (per second) 2.0 inches Backgauge Travel ...more

Punching Power 120 Ton Maximum Capacity 1-1/2" x 3/4" Throat 29-1/2" Punching of Sections with Gooseneck Die Holder. I on the Leg 4" - 17-3/4" I on the Web 4" - 19-5/8" U on the Leg 4-3/4" x 15-3/4" U on the Web 4-3/4" x 15-3/4" Strokes Per MInute 28 Stroke 3/4" Maximum Stroke 3-5/32" Working Height 42" Horsepower 20 ...more

Stock #: 210260006, Location: Decatur, GA, Brand: Accurpress, Model: 713010, Serial #: 1089, Year: 1987, Approx. Shipping Weight: 15,000 Lbs., Approx. Shipping Dimensions: 11' L x 6' W x 8' H, Tonnage: 130 Tons, Bed Length: 10', Distance Between Frame: 100", Ram Stroke: 8", Open Height: ...more

Straight Side Press • Used 500 Ton Press for Sale Manufacturer: Niagara Model: Niagara SC2-500-72-54 Press Condition: As-Is Under Power Location: Columbia, TN Warehouse Year: Year Unknown Machine #: 8029 CAPACITY 500 TONS STROKE 20″ MAX SHUT HEIGHT TO BED 38″ SDAU BED AREA 72″ X 54″ (RL X ...more

SERIAL. 595437MODEL. AB120-10YEAR NEW. 5/1995CAPACITY. 120 TONOVERALL LENGTH OF BED & RAM. 10'DISTANCE BETWEEN HOUSING. 8'6"STROKE OF RAM. 6"OPEN HEIGHT. 11"CLOSED HEIGHT. 5"DEPTH OF THROAT. 6"RAM SPEED FAST APPROACH. 86 IPMRAM SPEED SLOW BEND. 29 IPMRAM SPEED FAST RETURN. 155 IPMDUAL PALM BUTTONS. YESBACK ...more

Tonnage 100 tons, Stroke 3.00 inches, Shut Height 15.25 inches, SPM 300, Vari Speed (Yes/No) yes, Bed W 31 inches, Bed L 48 inches, Crank (Single/Double) double, Air Clutch (Yes/No) yes, CNC Control yes, Type of CNC Control Minster, Dimensions 144T x 107W x 63D, Weight 34000 pounds, Precision Straight Side Press ...more

Stock # 102165, Condition Used, Tonnage 400 tons Stroke 10 inches Shut Height 28 inches SPM 40 Vari Speed (Yes/No) yes Bed W 96 inches Bed L 48 inches Bed Size: 96" x 48" Max Shut Height: 28” Set Die Build Height: 27” Slide Adjustment: 10” Slide Stroke: 10” SPM (min): 20 SPM (max): 40 Method of ...more

Two Presses: One heated - One cooled, Tonnage: 160 ton, Daylight: 23", Die area Left to right: 90.5", Die area Front to Back: 59", Stroke Main Ram: 24", Work Height: 36", Cylinder Diameter Main Ram: 2 X 7", Max. Operating pressure: 2750 PSI, Main Motor Horsepower: 15 HP, Power Supply: 460V / 3PH, Reservoir Capacity: ...more

Make: Accurl, Model: Master, Year: 2026, Machine Location: Upon Request, Upgraded Delem DA66S CNC Control, Upgraded Open Height & Stroke, Upgraded ECO Energy Savings Drive Standby Inverter, Y1/Y2 Upper Ram, X/R, Z1/Z2 Servo Backgauge, CNC Crowning System, Complete Set of Upper AND Lower tooling (4-way die) ...more

CAPACITY400 TONS STROKE6″ SHUT HEIGHT TO BED26″ SDAU SPEED0 – 120 SPM (VARIABLE) RAM ADJUSTMENT6″ (MOTORIZED) BED AREA72″ RL X 42″ FB SLIDE AREA74″ RL X 42″ FB (T-SLOTTED BOTH DIRECTIONS) WINDOW SIZE26″ FB X 20″ H BOLSTER PLATE SIZE6″ X 72″ RL X ...more

Stock # 102168, Condition Used, Tonnage 300 tons Stroke 12 inches Shut Height 25.25 inches SPM 18 Vari Speed (Yes/No) no Bed W 102 inches Bed L 48 inches Model: #300-48-102 Capacity: 300 Ton Stroke Of Slide: 12" Power Slide Adjustment: 6" Shut Height, SDAU: 24-1/4" Area Of Ram T Slotted Ram: 102" X 48" Windows: 26" ...more