301 - 350 of 938 listings
Contrinex Mounting Column for Safety Light Curtain YXC-1660-F00
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Contrinex
Used in safety light curtain installations requiring a dedicated protective housing column, the Contrinex YXC-1660-F00 is a mounting column designed for use with Contrinex Safetinex safety barriers. The item carries part number YXC-1660-F00, barcode 605 000 676, and was manufactured in Germany in 08/2016. The housing ...more
Control Techniques Servo Drive MAXI MAESTRO 200X25/50
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Control Techniques
The Control Techniques 200X25/50 is a DC servo drive from the Maxi Maestro range, used in CNC machine tools and industrial servo positioning systems to control permanent magnet DC servo motors. The nameplate identifies it as a D.C. Servo Drive, Type 200 X 25/50, with input rated at 150V RMS nominal +10/15%, 3 phase ...more
JUST ADDED!
Crouse-Hinds FS22 Condulet Cast Device Box
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Crouse-Hinds
The Crouse-Hinds FS22 is a two-gang shallow cast device box from the Condulet series, manufactured by Cooper Crouse-Hinds in Syracuse, New York. Constructed from Feraloy iron alloy, the FS22 accepts a 3/4 in NPT threaded conduit hub and is designed for use with rigid or intermediate metallic conduit systems. The box ...more
JUST ADDED!
Cutler-Hammer 38RBA4-DH Disconnect Fuse Holder 38 Kv Max
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Cutler-Hammer
The Cutler-Hammer 38RBA4-IDH is a medium voltage disconnect fuse holder rated for 38 kV maximum and 300 amps maximum, operating at 50/60 Hz. Manufactured by Cutler-Hammer Inc. of Pittsburgh, PA, this unit carries catalog number 38RBA4-DH with style number 309C797G04, and is part of the RBA-400 series designed for ...more
JUST ADDED!
Cutler-Hammer Molded Case Circuit Breaker LS500
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Cutler-Hammer
The Cutler-Hammer LS500 is a 3-pole, L Frame, 500 amp molded case circuit breaker manufactured by Eaton in the United States. It is rated for use on DC circuits using any two poles or on single-phase AC circuits, and carries a non-interchangeable trip unit as noted on the nameplate. The L Frame designation places this ...more
Get email updates for newly added Electrical MRO Components & Parts
Electrical MRO (Maintenance, Repair, and Operations) refers to the equipment, tools, and parts used to maintain and repair electrical systems and machinery in industrial, commercial, and institutional settings. These parts are critical for ensuring that electrical systems run efficiently, safely, and without interruption. MRO supplies include everything from wiring, fuses, and relays to more complex components like motors, circuit breakers, and AC drives.
Danaher Motion I/O Module M-1017-5970
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Danaher Motion
Danaher Motion Digitizing Interface II board, Part Number M-1017-5970. The nameplate identifies Reference Number 572-02777-50 and states this unit is a remanufactured substitute for 502-02777-00. Serial Number D59480 and Date Code 438409 are printed on the label. The assembly is marked "DIGITIZING INTERFACE II," ...more
Danaher Motion I/O Module M-1017-5966
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Danaher Motion
The Danaher Motion Logic I/O Board, part number M-1017-5966, is an industrial control PCB assembly used in CNC and motion control systems. The identification label shows part number M-1017-5966 with reference number 572-02734-50 and indicates it is a remanufactured substitute for 502-02734-50. Serial number D39479 and ...more
Danaher Motion M-1017-1314 CNC Control Module PCB Board
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Danaher Motion
Industrial CNC control module board for Danaher Motion / Giddings & Lewis control systems. PCB control electronics used within the CNC cabinet. The identification label shows part number M-1017-1314 with reference number 503-16939-10 and serial number F29288. The board is marked "OP STATION 1.44M COLOR BOARD," ...more
Danaher Motion I/O Module M-1017-6051 32 VAC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Danaher Motion
Danaher Motion 32AC Output Board, Part Number M-1017-6051. Nameplate identifies Reference Number 572-03567-00 and notes this assembly as a remanufactured substitute for 502-03567-00. Serial Number E45917 and Date Code 159400 are printed on the label. The board is marked "32AC OUTPUT BOARD," indicating a 32-channel AC ...more
Danaher Motion CMOS Memory Board M-1017-5999
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Danaher Motion
The Danaher Motion CMOS Memory Board, part number M-1017-5999, is an industrial control PCB assembly used in CNC and motion control systems. The identification label shows part number M-1017-5999 with reference number 572-03274-00 and indicates it is a remanufactured substitute for 502-03274-00. Serial number A46650 ...more
Danaher Motion Differential Encoder Interface Module M.1008.0342
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Danaher Motion
This Danaher Motion M.1008.0342 Differential Encoder Interface module is a surplus PCB assembly manufactured by Danaher Motion (Kollmorgen). The part number M.1008.0342 is clearly marked on the label along with reference number 502-03733-00, serial number F37033, and date code 060901. The unit is identified as a ...more
Danaher Motion Differential Encoder Interface Module M-1008-0342
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Danaher Motion
This listing is for a Danaher Motion Differential Encoder Interface module, part number M-1008-0342, reference number 502-03733-00, serial number F37032, manufactured in September 2001 per the visible date code 060901. The module is designed to interface differential encoder signals within servo drive and motion ...more
Data Products Core Memories Inc Core Memory Plane Board 717510-2D m00517
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Data Products Core Memories Inc
This Data Products Core Memories Inc ferrite core memory plane board, part number 401-50326-00 (assembly 717510-2D, serial HA 366, PWB 717166-1D), is a large-format magnetic core memory array providing 32K x 18 bit capacity. The board was assembled in Hong Kong and bears the DPHK 9 Final inspection stamp. The solder ...more
JUST ADDED!
Dayton Limit Switch 12T931 Plunger, Top Actuator, SPDT, 10A @ 300V AC, IP67, NEMA 4/6/6P/12/13
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dayton
The Dayton 12T931 is a purpose enclosed limit switch with a plunger actuator located at the top of the body. The switch s an SPDT contact form rated at 10 amps at 300V AC, with a contact designation of A300/Q300. Enclosure ratings include NEMA 4, 6, 6P, 12, and 13, with an IP67 ingress protection rating, making the ...more
Dayton Limit Switch 12T931
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dayton
The Dayton 12T931 is a miniature -purpose limit switch with a plunger actuator, SPDT contact form, and a 10-amp rating at 300V AC/DC. The enclosure is rated for NEMA Types 4, 6, 6P, 12, and 13, and carries an IP67 ingress protection rating, making it suitable for use in wet, dusty, or washdown environments. The switch ...more
DMG MORI DMG-HBG-2687447 CNC Handwheel Pendant MPG
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dmg
The DMG MORI DMG-HBG-2687447 is an electronic handwheel pendant used as the external manual pulse generator on DMG MORI CNC machine tools, including 5 axis machining centers running Siemens 840D and related control platforms. The unit pairs a precision pulse generator wheel with a hardened plastic housing, a coiled ...more
DMG MORI DMG-HBG-2687447 CNC Handwheel Pendant - Manual Pulse Generator
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dmg
Designed for use as the external manual pulse generator on DMG MORI CNC machine tools, the DMG-HBG-2687447 pendant pairs a precision handwheel with a programmable button panel and an integrated emergency stop. The unit identification plate confirms ID No. 2687447, Suppl. 45179, Ser. No. 11218721040006, and the ...more
JUST ADDED!
DMG Mori Cable Assembly KD1037A02
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dmg
The DMG Mori KD1037A02 is an OEM cable assembly sourced directly from a DMG Mori MILLTAP 700 CNC machining center. The shipping label identifies this unit as a DDRT-X NEW MILL cable, used in the DDRT 5th axis rotary table system on the MILLTAP 700 platform. The assembly s a flexible stainless steel armored conduit ...more
JUST ADDED!
DMG CNC Machine Work Light RL70CE / RL70CV DC 24V
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dmg
Used in DMG Mori CNC machining centers and turning centers as OEM interior machine lighting, this cylindrical LED work light carries the DMG brand identifier on the aluminum housing and mounts to the machine enclosure via a four-bolt flange base. The label on the flange reads DC 24V, 5 x 30 mA, 2A / Typ "B," ...more
JUST ADDED!
Dril-Quip CNC Operator Control Panel
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dril-Quip
A machine operator control panel manufactured by Dril-Quip, configured for CNC lathe or multi-spindle turning center applications. The front face s an array of illuminated pushbutton switches in green, red, and orange, labeled for functions including Cycle Start, Feed Hold, Machine Lock, Rapid, H1 Tool Inspect, H1 ...more
Dril-Quip Operator Control Panel for a Dril-Quip Pipe Threading/Rolling Machine
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dril-Quip
Used in pipe machining and threading equipment, this Dril-Quip operator control panel provides manual and sequenced machine control functions for roller and feed axis operation. The front face is engraved with the Dril-Quip brand name and includes labeled controls for four roller stations (Roller 1 through Roller 4) ...more
Dril-Quip CNC Operator Control Panel m00829
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dril-Quip
A machine operator control panel manufactured by Dril-Quip, configured for CNC lathe or multi-spindle turning center applications. The front face s an array of illuminated pushbutton switches in green, red, and orange, labeled for functions including Cycle Start, Feed Hold, Machine Lock, Rapid, H1 Tool Inspect, H1 ...more
Dynamic Displays, Inc. QES1512-081-Rev-S-C2 HMI BRAND NEW
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dynamic
The Dynamic Displays QES1512-081 is a 12.1 inch industrial grade LCD replacement monitor designed as a drop in upgrade for legacy 12 inch CRT displays used in industrial control and CNC machine tool applications. Model QES1512-081 is identified by Dynamic Displays as a direct replacement for the Motorola DS3000-140A ...more
JUST ADDED!
Dynamic Displays Industrial LCD Monitor QES1508-102 Rev 2 C2 24 VDC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dynamic
Used in CNC machining centers as a direct drop-in replacement for legacy 9-inch CRT displays, the Dynamic Displays QES1508-102 is an 8.4-inch Active Matrix TFT LCD industrial open-frame monitor configured for Fanuc 6, 6L, and 6M series CNC machine controls. The unit accepts TTL video signals via a Hirose (Honda) ...more
Dynapath Digital I/O Board 501-03855-00 m00822
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dynapath
The Dynapath 501-03855-00 is a Digital I/O board designed for use in Dynapath CNC control systems. The board carries silkscreen designation "DIGITAL I/O" and is labeled with revision code 1/86 RC, indicating a January 1986 revision cycle. The assembly is configured as a dual-section board, with two mirrored I/O ...more
Dynapath Digital I/O Board 501-03855-00
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dynapath
Used in Dynapath CNC control systems, the 501-03855-00 is a full-length Digital I/O board configured as a dual-section assembly, with each half independently labeled INPUT and OUTPUT. The board is silkscreened with the designation DIGITAL I/O and carries revision code 1/86 RC. Each of the two mirrored sections ...more
Dynapath Systems CMOS Dual Bus Memory Board 501-03883-01
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dynapath Systems
Used in Dynapath Delta series CNC control racks, the 501-03883-01 is a CMOS Dual Bus Memory Board manufactured under the Bendix/PTI era of Dynapath Systems. The board carries secondary assembly number 502-03093-41, visible on the PCB label, and board assembly prefix 503, with serial number A20415 printed on the bottom ...more
Dynapath Systems CMOS Dual Bus Memory Board 501-03883-00
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Dynapath Systems
A CMOS Dual Bus Memory Board from Dynapath Systems, part number 501-03883-00, with secondary board reference 502-03093 visible on the PCB silkscreen. Dated to the 42nd week of 1984, this is a Bendix-era ISA-format board used in Dynapath Delta series CNC control systems. The board carries serial number D09417 and board ...more
JUST ADDED!
Eaton Motor Circuit Protector HMCP400R5 600V AC / 250V DC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Eaton
The Eaton Cutler Hammer HMCP400R5 is a 3-pole, 400-ampere motor circuit protector rated for 600 VAC and 250 VDC operation. Catalog number HMCP400R5, Style 1493095620, this unit belongs to Eaton's HMCP K-frame family, featuring a magnetic-only, instantaneous-trip mechanism designed specifically for motor branch ...more
JUST ADDED!
Eaton Disconnect Indicating Fuse Holder 38RBA4-IDH 38 Kv
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Eaton
The Eaton 38RBA4-IDH is an RBA-400 series disconnect indicating fuse holder rated for 38.0 kV maximum and 300 amps maximum continuous current at 50/60 Hz. It carries style number 5981C52G04 as shown on the nameplate. The indicating function provides visual blown-fuse detection, which assists maintenance personnel in ...more
JUST ADDED!
Eaton DC Contactor ME020F
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Eaton
The Eaton ME020F is a Size 0 NEMA rated DC contactor from the Type ME 600 Volt Definite Purpose contactor family, originally manufactured under the Cutler Hammer brand and made in the U.S.A. The factory carton label identifies it as a 10 Amp, 2 Pole, normally open contactor with a 550 VDC operating coil. The internal ...more
JUST ADDED!
Eaton Medium Voltage Expulsion Fuse Refill 38RBA4-300E-FN
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Eaton
Rated at 38 kV maximum with 34.5 kV nominal system voltage, the Eaton Cutler Hammer 38RBA4-300E-FN is a Type RBA4 expulsion fuse refill unit for medium voltage power distribution applications. This Class E rated refill carries a 300E continuous current rating and is designed for use in RBA series fuse mountings for ...more
JUST ADDED!
Eaton Cutler-Hammer Manual Motor Starter B100M1C 600VAC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Eaton
The Eaton Cutler-Hammer B100M1C is a three phase, non reversing manual motor starter from the B100 series, NEMA size M1, open type construction. Style number 2602D70G05, Model B, manufacturing code C071011. This three pole starter s a toggle operator with padlockable OFF position and integral bi-metallic three pole ...more
JUST ADDED!
Eaton NEMA Size 2 Non Reversing Motor Starter A200M2CAC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Eaton
The Eaton A200M2CAC is a NEMA Size 2 non reversing magnetic motor starter from the A200 Freedom series, manufactured under style number 6710C51G05 and Model J designation. This three pole starter is rated 45 amps with a 600V maximum operating voltage and a 120V at 60Hz / 110V at 50Hz control coil. Maximum horsepower ...more
JUST ADDED!
Eaton Heavy Duty Safety Switch 30-43074-2 600V AC / 250V DC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Eaton
Used in commercial and industrial electrical installations, the Eaton Heavy Duty Safety Switch model 30-43074-2 is a single-throw disconnect rated at 30 amps, 600V AC, 60 Hz, and 250V DC. The unit s a red-handled operator mechanism on a painted steel enclosure and carries a Made in USA designation visible on the ...more
Eaton General Duty Safety Switch DG223NGB 240V Allis-Chalmers
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Eaton
Used in residential, commercial, and light industrial electrical systems, the Eaton DG223NGB is a duty fusible safety switch rated at 100 amperes and 240 volts AC. The enclosure is NEMA 1 painted steel construction, suitable for indoor surface-mount installations. The switch is two-pole, three-wire configuration with ...more
Ebm-papst Allis-Chalmers Axial Cooling Fan W2E142-BB01-01 230V AC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Ebm-Papst
Used in industrial control cabinets, CNC enclosures, and automation equipment, the ebm-papst W2E142-BB01-01 is a 172 mm AC tubeaxial cooling fan rated at 230V AC, 50/60 Hz, with a power draw of 27/28W and a run capacitor of 1 µF. The fan carries an internal ebm-papst catalog reference of 7056 ES and was ...more
YE LI Electric Machinery CO., LTD AC 3-Phase Servo Drive YPV-150-B 200-230 VAC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Electric Machinery
The YE LI E&M YPV-150-B AC Servo Driver is a three-phase servo drive designed for industrial motion control applications. The nameplate identifies the unit as Model YPV-150-B (I13-S5), part of the YPV Series, manufactured by YE LI E&M CO., LTD. AC input requirements are 200-230 volts, 50/60 Hz, three-phase ...more
Electric Machinery CO., LTD. Servo Drive YB150L 220V
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Electric Machinery
YE LI E & M CO. YB150L AC Servo Driver - 220V, 1.5 kW Output, Model YB150L, This listing is for a YE LI E & M CO., LTD. AC Servo Driver, model YB150L. The unit is labeled "BL DRIVER" on the manufacturer nameplate and "AC SERVO DRIVER" on the front panel., Manufacturer: YE LI E & M CO., LTD., Model: YB150L ...more
Ye Li Electric Machinery Co., Ltd AC Servo Drive YPV-150-B
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Electric Machinery
Used in CNC machining centers, automation equipment, and other motion control applications, the Ye Li E&M YPV-150-B is a 3-phase AC servo drive from the YPV Series. The nameplate identifies the model as YPV-150-B with internal designation 13S-95, manufactured by Ye Li E&M Co., Ltd of Taiwan. Input are 200-230V ...more
JUST ADDED!
Emerson SolaHD DIN Rail Power Supply SDN 10-24-100C
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Emerson
The Emerson SolaHD SDN 10-24-100C is an AC to DC DIN rail power supply from the SDN C Compact Series, designed for industrial control panel applications. Rated for 100 to 240 VAC universal input at 50/60 Hz and providing 24 VDC at 10 A continuous output (240 W total), this unit supports parallel operation for N+1 ...more
JUST ADDED!
Ergodyne Chill-Its #6665, evaporative cooling vest
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Ergodyne Chill-Its
Model: 6665
The Ergodyne Chill-Its 6665 is an evaporative cooling vest designed for workers exposed to high heat environments. This unit is size XL in gray (silver), part number 6665, UPC 720476125457. Construction consists of a 100 percent quilted nylon outer fabric paired with a 100 percent nylon inner fabric, featuring polymer ...more
Eurotherm Drives Digital DC Drive 955D8R62 480/230 VAC m00576
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Eurotherm Drives
The Eurotherm Drives 590 DRV Digital DC Drive, catalog number 955D8R62, is a regenerative DC armature drive from the 590 DRV series. It accepts a 3-phase main supply of 480 or 230 VAC (+10%) at 50/60 Hz with a maximum input of 85 amps. The armature output is rated at 500 or 240 VDC at up to 99 amps, supporting motor ...more
Eurotherm Drives DC Drive 955D8R1253A
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Eurotherm Drives
The Eurotherm Drives 955D8R1253A is a 590 Digital Series regenerative DC drive assembly from the 590 DRV product family. The DRV format integrates the drive controller with associated power components on a common mounting plate, including an ABB Spectrum EHDB 220 solid state drive contactor rated at 600 V DC and 220 A ...more
Eurotherm Drives DC Drive 590 Digital Series
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Eurotherm Drives
Used in industrial DC motor control applications, the Eurotherm Drives 590 Digital Series is a fully digital DC drive designed for three-phase AC supply input ranging from 220 to 500 VAC. The unit visible in these photos includes the 590 Digital Series drive controller paired with an ABB Spectrum EHDB 220 solid-state ...more
Eurotherm Drives DC Drive 590 Digital Series m00619
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Eurotherm Drives
Used in industrial DC motor control applications, the Eurotherm Drives 590 Digital Series is a three-phase SCR-based DC drive designed for variable-speed control of DC motors. The unit s a digital front panel with LCD display and LED status indicators for Health, Run, Start Contactor, Overcurrent Trip, Program Stop ...more
Fanuc I/O Module A03B-0819-C104#D 24V DC m00493
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Model: D
This listing is for a Fanuc A03B-0819-C104#D I/O Module, model designation AID16D I/O Model A, manufactured in Charlottesville, Virginia, USA. The nameplate identifies this as a 24VDC 16-point positive and new logic input module. The unit carries cULus listing (file E157515, guide 8M89) and CE marking. It is rated for ...more
Fanuc I/O Module A03B-0819-C104#D 24V DC m00492
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Model: D
This listing is for a Fanuc A03B-0819-C104#D I/O Module, model designation AID16D I/O Model A, manufactured in Charlottesville, Virginia, USA. The nameplate identifies this as a 24VDC 16-point positive and new logic input module. The unit carries cULus listing (file E157515, guide 8M89) and CE marking. It is rated for ...more
Fanuc I/O Module A03B-0819-C104#D 24V DC m00490
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Model: D
This listing is for a Fanuc A03B-0819-C104#D I/O Module, model designation AID16D I/O Model A, manufactured in Charlottesville, Virginia, USA. The nameplate identifies this as a 24VDC 16-point positive and new logic input module. The unit carries cULus listing (file E157515, guide 8M89) and CE marking. It is rated for ...more
Fanuc I/O Module A03B-0819-C160#D 250V Allis-Chalmers m00495
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Model: D
This listing is for a Fanuc A03B-0819-C160#D I/O Module, model designation AOR08G I/O Model A, manufactured in Charlottesville, Virginia, USA. The nameplate identifies this as an 8-point relay output module rated at 30VDC and 250VAC. The unit carries UL listing (file E157515, guide 8M89), cUL listing, and CE marking. ...more
