701 - 750 of 938 listings
Giddings & Lewis and Lewis Linear Isolator Circuit Board 501-04172-00 / 502-03326-00 m00555
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Lewis
This listing is for one used Giddings and Lewis Linear Isolator circuit board, assembly number 501-04172-00, schematic number 502-03326-00. The serial number A98097 is visible on the barcode label at the board edge. The board is designed as a dual-channel linear signal isolation card featuring two Burr-Brown ISO100AP ...more
Giddings & Lewis and Lewis Servo Interface Circuit Board 501-03882-00 / 502-03092-00
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Lewis
This listing is for one used Giddings and Lewis Servo Interface circuit board, assembly number 501-03882-00, schematic number 502-03092-00, manufactured by Giddings and Lewis Electronics. The board carries serial number A26428 as visible on the barcode label at the board edge, with a revision date code of RC 5/84 ...more
LH Research Power Supply MM23-E0868/115 m00147
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Lh Research
The LH Research MM23-E0868/115 is a Mighty-Mite series switchmode power supply with a part number of 845696-100. This three output unit accepts a 115 VAC, 47 to 63 Hz input rated at 750 VA and delivers 375 W of total output power. Output 1 (V1) is rated at 5 VDC, 7.5 A, and outputs 2 and 3 (V2, V3) are each rated at ...more
LH Research Power Supply MM23-E0868/115
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Lh Research
"The LH Research Mighty-Mite MM23-E0868/115 is a triple-output industrial power supply rated at 375 watts output and 750VA input. The nameplate confirms input voltage of 115VAC at 47 to 63 Hz. The three DC output rails are V1 at 5VDC and 75 amps, V2 at 15VDC and 8 amps, and V3 at 15VDC and 8 amps. Part number on the ...more
JUST ADDED!
Magnetek Resolver I/O Card PN-C79959
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Magnetek
The Magnetek PN-C79959 is a 14-bit Resolver I/O Card designed for use in Magnetek elevator drive systems. The card interfaces resolver-based motor feedback signals with the drive control system, converting analog resolver outputs to 14-bit digital position data for precise motor speed and position regulation. A Xilinx ...more
Get email updates for newly added Electrical MRO Components & Parts
Electrical MRO (Maintenance, Repair, and Operations) refers to the equipment, tools, and parts used to maintain and repair electrical systems and machinery in industrial, commercial, and institutional settings. These parts are critical for ensuring that electrical systems run efficiently, safely, and without interruption. MRO supplies include everything from wiring, fuses, and relays to more complex components like motors, circuit breakers, and AC drives.
Mazak EAHR-001 Handheld CNC Control Pendant MPG New
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mazak
The Mazak EAHR-001 is a portable handheld manual pulse generator (MPG) pendant used on Mazak CNC machining centers and turning centers for jog control, axis positioning, and machine setup. The unit s a graduated rotary handwheel marked at 10 unit increments around its dial face, a recessed selector for choosing the ...more
Mazak TRD-NA360PW5M Rotary Encoder NEW
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mazak
The Koyo TRD-NA360PW5M is an absolute rotary encoder manufactured by Koyo Electronics (Jtekt) and supplied as a Mazak OEM service component under part number R51ZZ001160. The nameplate identifies the unit as an absolute rotary encoder with a 10.8 to 26.4 VDC operating range, gray code parallel output, and a multi pin ...more
Mazak i Mazak Sequencer Board MPS-200 / A829033A
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mazak
Used in Yamazaki Mazak CNC machining centers and turning centers, the MPS-200 Sequencer Board with PCB number A829033A is a programmable machine sequencer printed circuit board manufactured by Yamazaki Mazak Corporation in Japan. The board carries the serial number 9203003 as visible on the nameplate. It is populated ...more
Mazak i Mazak Sequencer Board A829035A (MPS-400)
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mazak
The Yamazaki Mazak A829035A is a sequencer board used in Mazak MPS-400 CNC control systems. The board carries silkscreen designation A829035A and is identified in the Mazak parts ecosystem as a PC Sequencer Board, listed by multiple US industrial suppliers under that MPN. The assembly mounts an onboard DC-DC converter ...more
Mazak CNC Control Board IPM-200
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mazak
Used in Mazak CNC machining and turning centers, the IPM-200 is a discontinued Mazatrol main control board identified by Mazak and industrial surplus suppliers as an M/T Control BD. The board carries MPN IPM-200 and is silkscreened with the designation "W/1 CONTROLLER," with a board revision identifier of S829091B ...more
Mazak (Yamazaki Mazak) M/T Controller Board IPM-200 +24V DC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mazak
The Mazak IPM-200 is a M/T Controller Board used in Yamazaki Mazak CNC machining centers the Mazatrol control system. Silkscreen markings on the PCB identify it as the IPM-200 and confirm the M/T Controller designation. The board s a +24V DC supply reference visible on the component side, along with a large heatsink ...more
Mazak i Mazak Controller Board IPM 300
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mazak
This listing is for a Yamazaki Mazak IPM 300 M/T Controller board, as identified by the Mazak logo and IPM 300 M/T CONTROLLER silkscreen printed along the right edge of the board. Connector designations CN500, CN502, CN503, and CN504 are visible along the left and lower edges of the board., Populated components ...more
Mazak (Yamazaki Mazak) M/T Controller Board IPM-200
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mazak
Used in Mazak CNC machining centers, the IPM-200 is a Yamazaki Mazak M/T Controller board designed for machine tool control applications. The board carries the Mazak name and IPM-200 part number printed directly on the PCB silkscreen, confirming manufacturer and model identification. The assembly is a full-size ...more
Mean Well Switching Power Supply S-150-24
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mean Well
The Mean Well S-150-24 is a single-output enclosed switching power supply rated at 156W with a 24VDC output at 6.5A. It accepts a universal AC input with selectable voltage via an onboard switch, supporting 110 to 120VAC at 3.2A or 220 to 240VAC at 1.6A, at 50 or 60Hz. The output is regulated DC at plus 24 volts. The ...more
Mean Well Rail Mount Switching Power Supply DRP-240-24
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mean Well
This listing is for a Mean Well DRP-240-24 DIN rail mount switching power supply with power factor correction, as identified on the nameplate label. The unit is manufactured in Taiwan and carries CE, UL listing under file E215312 as industrial control equipment Class 84A0, and UL recognition under file E193223 Level ...more
JUST ADDED!
MeK-Tronics Control Transformer 5814-0003-002
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mek-Tronics
Rated at 480V primary to 24V secondary with a 40VA capacity, this MeK-Tronics control transformer carries part number 5814-0003-002 and is widely cataloged in the US market under Marley Engineered Products, Berko, and QMark branding. Internal markings also include MKT-04E0ZZ03-147 and date code T1 1624. The unit ...more
JUST ADDED!
Bystronic Laser Controller
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Melcher
A modular multi-axis servo drive rack from Melcher, bearing chassis part number 10043063 R.00. The unit houses eight axis slots labeled A1ST1 through A1ST8 and incorporates an integrated Melcher power supply module (part number 10041932 R.00) with dual LED status indicators labeled Input OK and Fault. Front panel ...more
Metrol T2002-01-09 Sensor
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Metrol
The Metrol T2002-01-09 is a precision touch sensor tool setter designed for use on CNC machining centers. Manufactured by Metrol Ltd. of Japan, this sensor provides automated tool length measurement, tool wear detection, and tool breakage detection inside the machine envelope. The T2002 series is part of Metrol's ...more
Metrol T2002-01-09 Sensor m00058
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Metrol
The Metrol T2002-01-09 is a precision touch sensor tool setter designed for use on CNC machining centers. Manufactured by Metrol Ltd. of Japan, this sensor provides automated tool length measurement, tool wear detection, and tool breakage detection inside the machine envelope. The T2002 series is part of Metrol's ...more
Miller Electric DC Arc Welding Power Source Goldstar 300SS
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Miller
Used in industrial fabrication and maintenance shops requiring a robust constant current DC welding platform, the Miller Gold Star 300SS is a transformer-based DC arc welding power source rated at 13 kW. Input voltage is 200/230/460V at 69/60/30 amperes respectively, three phase, 60 Hz. The unit carries serial number ...more
Minebea Co., Ltd. A90L-0001-0555/RW Blower
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Minebea
The Fanuc A90L-0001-0555/RW is a spindle motor cooling fan manufactured by Minebea Co. Ltd. under OEM part number RT8934-0220W-B30F-S02. This centrifugal blower style fan is used to cool Fanuc AC spindle motors in CNC machining centers, lathes, and turning centers. Serial number 002475 is present on the nameplate. The ...more
Mitsubishi MDS-DH-CV-370 Power Supply
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi MDS-DH-CV-370 is a 30 kW power supply unit from the MDS-DH series, designed to supply DC bus voltage to Mitsubishi MDS servo drives and spindle drive modules in CNC machine tool applications. The nameplate identifies a three phase input rated 70A at 380 to 440V or 380V at 50/60 Hz, with a single phase ...more
Mitsubishi Electric Sensor OSA166ET2NA
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric OSA166ET2NA is an absolute rotary encoder used as the feedback device on Mitsubishi AC servo motors within CNC machine tool and industrial automation systems. Identified on the rating plate as ABSOLUTE ENCODER OSA166ET2NA, with serial number J5AW06SX10D and date code 1810, this unit is ...more
Mitsubishi Electric OSA105S5A Sensor New m00042
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric OSA105S5A is an absolute rotary encoder used as a position feedback device on Mitsubishi servo motors and CNC machine tool axes. The nameplate confirms model OSA105S5A, serial number J5AW010771J, date code 2207, with revision markings A2 and G, and identifies the unit as manufactured by ...more
Mitsubishi Electric MDS-EH-V1-80 Servo Drive
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric MDS-EH-V1-80 is a single axis AC servo drive unit from the MELSERVO MDS-EH series, designed for use in CNC machine tool applications and commonly paired with Mitsubishi HF-H and HP-H series servo motors. The nameplate identifies a power rating of 4.5 kW, 6A input at DC 513V to 648V, and 17A ...more
Mitsubishi Electric MDS-B-V1-20 Servo Drive - New in Package
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi MDS-B-V1-20 is a single axis AC servo drive unit from the MELDAS MDS-B Series, rated at 2.0 kW for use with Mitsubishi HA Series and HC Series servo motors. This drive accepts a 270 to 311 VDC bus input from a compatible MDS-B Series power supply unit and 200 to 230 VAC control power, producing the ...more
JUST ADDED!
Mitsubishi Electric Servo Drive Unit MDS-A-SVJ-10
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric MDS-A-SVJ-10 is a servo drive unit from the MDS-A series, manufactured by Mitsubishi Electric Corporation in Japan. It is designed for use in CNC machining centers and industrial automation systems requiring precise axis motion control. The unit accepts a rated input of 3-phase AC 200 to 230V ...more
JUST ADDED!
Mitsubishi Electric Remote I/O Unit FCUA-DX110 24 VDC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric FCUA-DX110 is a Remote I/O Unit for use in Mitsubishi CNC 700 Series and compatible control systems. It provides 64 digital inputs and 48 digital outputs, operating on 24V DC input at 3.8A as confirmed on the nameplate. The unit connects to the CNC controller via two RIO ports (RIO1 and RIO2) ...more
JUST ADDED!
Mitsubishi Electric Servo Drive Unit MDS-A-SVJ-10
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric MDS-A-SVJ-10 is a 1 kW AC servo drive unit from the MDS-A series, designed for use in CNC machining center applications requiring precise axis motion control. The nameplate confirms an AC input voltage of 200 to 230V at 50/60 Hz and a power rating of 1 kW. Hardware version is listed as H/W ...more
JUST ADDED!
Mitsubishi Electric Spindle Drive Unit MDS-C1-SP-185-N 200V
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric MDS-C1-SP-185-N is an 18.5 kW spindle drive unit from the MDS-C1 series, designed for use in CNC machining centers and high-performance spindle control applications. The nameplate identifies the input as 76A DC 270 to 311V with a secondary input of 0.2A single-phase 200 to 230V at 50/60 Hz. ...more
JUST ADDED!
Mitsubishi Electric Power Supply Unit MDS-B-CV-260
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric MDS-B-CV-260 is a power regenerative power supply unit designed for use with Mitsubishi MDS-B series servo drives and spindle drives in CNC machine tool applications. It belongs to the MELDAS 500 series drive system platform and serves as the centralized DC bus converter for multi-axis drive ...more
JUST ADDED!
Mitsubishi Electric Servo Drive Unit MDS-C1-V1-35-N
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric MDS-C1-V1-35-N is a 3.5 kW AC servo drive unit from the MDS-C1 series, designed for use in CNC machine tool applications. The nameplate confirms a DC bus input of 270 to 311V, a single-phase control input of 0.2A at 200 to 230V 50/60Hz, and a three-phase output of 19A at 155V with a frequency ...more
JUST ADDED!
Mitsubishi Electric VFD Inverter FR-A220-7.5K-11 200-230V Allis-Chalmers Input
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric FR-A220-7.5K-11 is a 7.5 kW variable frequency drive from the Freqrol A200 series, designed for three-phase AC motor speed control in industrial applications. The nameplate confirms an AC input rating of 200 to 220V at 50Hz and 200 to 230V at 60Hz, with an output current of 33A. Serial numbers ...more
JUST ADDED!
Mitsubishi Electric CNC Control Unit FCA50L 200V Allis-Chalmers
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric FCA50L is a CNC control unit from the MELDAS 50 series, manufactured in Japan and dated June 1998 per the nameplate label (date code 9806). Serial number MA105741086 is confirmed on both the front panel label and the rear nameplate sticker. The unit s a front-panel interface with labeled ...more
JUST ADDED!
Mitsubishi Electric Spindle Drive Unit MDS-A-SPJ-75 200-230V Allis-Chalmers
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric MDS-A-SPJ-75 is a 7.5 kW spindle drive unit from the MDS-A series, designed for use with Mitsubishi AC spindle motors in CNC machining centers and other machine tool applications. The nameplate confirms an AC input of 200 to 230V at 50/60 Hz and a rated power output of 7.5 kW. Software version ...more
Mitsubishi Electric 3-Pole Molded Case Circuit Breaker (MCCB) NF400-CP 600VAC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric NF400-CP is a 3-pole molded case circuit breaker (MCCB), also designated a No-Fuse Breaker, rated at 400 amperes and 600VAC with a frequency range of 50 to 60Hz. The impulse withstand voltage (Uimp) is rated at 8kV as confirmed on the nameplate. This unit is the economy-class (CP series) ...more
Mitsubishi Electric Corporation LCD Display Unit FCU7-YZ141 DC 12V, 1A / 3.3V
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
Rated at DC 12V 1A / 3.3V input, the Mitsubishi Electric FCU7-YZ141 is an LCD display unit manufactured in Japan for use in Mitsubishi M70 series and compatible Mazak CNC machining center control systems. The part number FCU7-YZ141 is confirmed on the factory nameplate label, along with serial number LDA0KKLZT01C and ...more
Mitsubishi Electric Corporation Control Unit UF740B
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
This listing is for a Mitsubishi Electric Corporation MELDAS Control Unit, Type UF740B, manufactured in Japan. The unit carries the MELDAS designation YQ8Z, with a date code of 87.06 (June 1987) and serial number 177, as stamped on the nameplate. A secondary label on an internal subassembly reads PD14C-1, manufactured ...more
Mitsubishi Electric Parameter Unit FR-PU01E
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric FR-PU01E is a 24-key digital parameter unit designed for use with Mitsubishi FREQROL Z200 and Z300 series inverter drives. Also referenced under part number BKO-C2128H07, this operator panel provides direct access to drive parameters including frequency setting (0 to 120 Hz), accel and decel ...more
Mitsubishi Servo Drive MR-S11-200-E01
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi MR-S11-200-E01 is a single-axis AC servo drive from the MR-S series, rated at 3.5 kW output capacity and designed for use in CNC machining centers and automated machine tool systems. It is commonly found in Mazak and Traub CNC platforms. The unit accepts a 200-230V AC, three-phase input and carries ...more
Mitsubishi Electric Spindle Drive Controller DL-SEZ-2-2.2-K-HD80
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
This listing is for a Mitsubishi Electric Corporation DIAROL Model DL-SEZ spindle drive controller, Type DL-SEZ-2-2.2-K-HD80, BD number 461U770, Serial W61590001 8811, manufactured in Japan. The front panel board reference is BD998B538K01-A. The DIAROL DL-SEZ series is a DC spindle drive controller platform used in ...more
Mitsubishi Electric AC Spindle Controller FR-SE-2-11K 200V
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
A Mitsubishi Electric FREQROL FR-SE series AC Spindle Controller rated at 11kW and 200V, the FR-SE-2-11K is a discontinued but widely sought after spindle drive used in CNC machining centers and turning centers. The unit belongs to the FR-SE generation of Mitsubishi spindle control platforms and carries the part ...more
Mitsubishi Electric Servo Drive MR-S2-100B-E01
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
Used in CNC machining centers and automated manufacturing equipment, the Mitsubishi Electric MR-S2-100B-E01 is a dual-axis AC servo drive designed for precise motion control applications. Manufactured by Mitsubishi Electric Corp. in Japan, this unit carries part number MR-S2-100B-E01 at Version A and serial number ...more
Mitsubishi Electric Corporation PCB Board QX524C BN634A636G51
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
Mitsubishi Electric MELDAS PCB board, model QX524C, part number BN634A636G51. This is the CRTC graphic display and video communication board for the Mitsubishi MELDAS M-Plus and T-Plus CNC control series, also used on Mazak MAZATROL M-Plus and T-Plus controls. Per manufacturer, the QX524C manages video output and ...more
Mitsubishi Electric Dual Axis Servo Amplifier MR-S12 / RG201 B5
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
Used in Mazak CNC machining centers and other MELDAS-controlled machine tools, the Mitsubishi Electric MR-S12 series is a dual axis AC servo amplifier designed to drive two servo axes simultaneously from a single compact assembly. The unit pictured includes the RG201 control board (marked RG 201 B5), an RG221 ...more
Mitsubishi Electric Corporation No-Fuse Breaker NF50-CS 600V Allis-Chalmers
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
This listing is for a Mitsubishi Electric Corporation NF50-CS No-Fuse Breaker rated at 40 amperes, 3-pole, 600V AC maximum. The unit is manufactured in Japan by Mitsubishi Electric Corp and carries catalog reference LN313N653-2 with date code D 8809, indicating manufacture in September 1988. A handwritten label CB2 is ...more
Mitsubishi Electric No-Fuse Breaker NF400-CA
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
A 400-amp, 3-pole molded case circuit breaker from Mitsubishi Electric, the NF400-CA carries the manufacturer's designation "No-Fuse Breaker" and is rated for AC 500V service. The nameplate identifies it as conforming to JIS, IEC, BS, and NEMA standards. Interrupting capacity ratings are listed as 20kA ...more
Mitsubishi Electric FREQROL FR-SE-2-26K AC Spindle Controller
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
This listing is for a Mitsubishi Electric Freqrol FR-SE series FR-SE-2-26K AC spindle controller, manufactured by Mitsubishi Electric Corporation, Japan. The Freqrol FR-SE is a dedicated AC spindle drive unit designed for CNC machine tool spindle motor control applications. The unit is a complete spindle drive ...more
Mitsubishi Electric Servo Drive Unit MR-J2-200CT
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
The Mitsubishi Electric MR-J2-200CT is a 2 kW servo drive unit manufactured in Japan and designed for use in CNC and industrial automation systems requiring precise motion control. The nameplate confirms a three-phase input rating of 10.5A at 200 to 230V 50/60Hz, with a supplemental single-phase input of 0.3A at 200 ...more
Mitsubishi Electric Corp. No-Fuse Molded Case Circuit Breaker NF50-CS Allis-Chalmers 600V
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Mitsubishi
This listing is for one used Mitsubishi Electric NF50-CS no-fuse molded case circuit breaker. Visible nameplate data confirms 50 amps, 3 pole, AC 600V, with an interrupting capacity of 5kA at AC 220V per JIS standard. Additional interrupting ratings are visible on the right side label: AC 550V 1.5kA, AC 460V 2.5kA per ...more
