R D Erbe & Associates Inc
PO Box 22132
Lansing, Michigan 48909-2132

Contact: Ronald Erbe
Tel: 517-244-9919
Fax: 517-244-9917
Email: machtrader@aol.com
Gold Level Dealer Since 2004

FORGING MACHINERY & EQUIPMENT
BILLET HEATERS, FORGING
Induction Billet Heaters, (5) Alpha 1, 600 KW, 3 kHz, in productionRFQ
Induction Billet Heaters, Alpha 1, 600 KW, 3 kHz, reconditioned warehouseRFQ

FORGING MACHINERY & EQUIPMENT
HAMMERS, FORGING AIR & STEAM for Metal Forming
3000 lb. Erie steam hammerRFQ
4000 lb. Ceco / Lasco conversion hammer with HGK250 Lasco headRFQ
35000 lb. Russian, hammer, 16 metric tonRFQ

FORGING MACHINERY & EQUIPMENT
PRESSES, FORGING, HYDRAULIC & MECHANICAL
250 Ton, Erie forge pressRFQ
1000 Ton, Ajax, forge pressRFQ
1300 Ton, Bliss #166, forge pressRFQ
1600 Ton, National #Maxi PressRFQ

FORGING MACHINERY & EQUIPMENT
REDUCER ROLLS, FORGING
Ajax #2, reducer roll, inboard rolls, 25" W, with set of diesRFQ
Brimet Cross Wedge Roll, bar, 60mm x 500mm, 2010, #417RFQ
National & Ajax #1-#10, forge rollsRFQ

FORGING MACHINERY & EQUIPMENT
ROLLS, FORGING
Ajax #2, reducer roll, inboard rols, 8 pass die 1.24" - 3" diameter, direct drive, good conditionRFQ

FORGING MACHINERY & EQUIPMENT
UPSETTERS
1" Ajax, upsetterRFQ
2" Ajax, upsetterRFQ
5" Hill-Acme, upsetterRFQ
5" National, upsetterRFQ
6" National, upsetterRFQ

PRESSES, GAP FRAME, SINGLE CRANK
200 Ton, Clearing, 16" stroke, 32" SH, 6" adj., 18 SPM, 52x30" ram, 66x36" bed, KO in ramRFQ

PRESSES, HYDRAULIC (Also See Presses, Laminating and Presses, Molding)
1000 Ton, Erie, hydraulic forge press, 48" x 48" bed, 72" DL, used, disassembled 1989RFQ

PRESSES, KNUCKLE JOINT (Coining & Embossing)
1000 Ton, Bliss, knuckle press, 6" strokeRFQ

PRESSES, O.B.I., BACK GEARED, SINGLE CRANK
75 Ton, Minster #7, 4" stroke, 17.5" SH, backgear driven, later modelRFQ
75 Ton, Minster, 4" stroke, OBI pressRFQ
90 Ton, Verson #7, 6" stroke, 15" SH, 34" x 21" bed, 45 SPMRFQ
125 Ton, Federal, 10" stroke, 45 SPM, 15" SH, 47" x 31" bed area, 30" x 14" ramRFQ
150 Ton, Danly, OBI press, 6" strokeRFQ

PRESSES, SCREW (Also See Chemical,Petroleum,Gas Etc. & Forging Equip. Catagories)
160 Ton, Berrenberg #RSPP-1981, screw press, 5.5" str, coining pressRFQ

PRESSES, STRAIGHT SIDE, DOUBLE CRANK (Single Action)
150 Ton, Minster #S2-150-48x36, SSDC, 48" x 36" bedRFQ
350 Ton, Bliss #SE2-350-84x36, SSDCRFQ
350 Ton, Bliss #SE2-350-84x36, SSDCRFQ
500 Ton, Verson, SSDC, 6" stroke, 7' x4' bed, 60 SPMRFQ

PRESSES, STRAIGHT SIDE, SINGLE CRANK (Single Action)
120 Ton, Bliss, SSSC, 8" stroke, 45 SPMRFQ
160 Ton, Minster #40-6-1/2, 12" stroke, 28" SH, 32 SPM, 4" adj.RFQ
250 Ton, Bliss #S1-250-36x36, SSSCRFQ
350 Ton, Clearing #F-1350-42, SSSC, 20" str., 20" SH, 4" adj., 40" x 36" bed, 36" x24" RamRFQ
350 Ton, Verson #S1-350, SSSC, 20" stroke, 28" SH, 12 SPM, 37" x 34" ram, 46" x37" bed, 10" adj.RFQ
500 Ton, Bliss, SSSC, 8" stroke, 42" x 48" bed, 27" Shut HeightRFQ

SHEARS, BAR & BILLET
Hill-Acme #300, billet shearsRFQ
Hill-Acme #500, billet shears, spare crank includedRFQ
Hill-Acme, AMD, Slugger billet shearsRFQ

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise