Logo

Machinery International Corp
20 Commerce Dr
North Branford, Connecticut 06471-1250

Contact: Steve McMillan
Tel: 203-484-0400
Fax: 203-484-4499
Email: sales@machyintl.com
Gold Level Dealer Since 1945
Visit our Website: http://www.machyintl.com
FacebookYou Tubetwitter
Machinery International Corporation is the successor to McMillan Conroy Machinery. Same great people - same great service - but an entirely new company structured to accomodate the changing needs of our customers worldwide. Machinery International Corp. is one of the world's largest suppliers of used metalworking machinery, specializing in equipment to manufacture ferrous and non-ferrous strip, tube, wire, rod, and bar. Be sure to visit our current inventory for a listing of our available machinery. If you do not see a machine you are looking for, please feel free to give us a call specifying your exact requirements. Machinery International Corp. maintains its main corporate office in North Branford, Connecticut, U.S.A., approximately Ninety minutes from New York City. With a satellite office in Birmingham, England, warehouses in the U.S.A. and England, a network of sales agents around the globe, and machines worldwide, Machinery International Corp. can provide equipment to you no matter where you are in the world.

BANDING LINES/COIL PACKAGING LINES
6000 lb. Signode, automated slit coil banding system, 62" maximum coil OD, #11273 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

BAR TURNERS/PEELERS
Hetran #WS2, 1-1/4" (31.75mm) - 3/8" (9.5mm), rod shaver, 1982, #13303 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

CASTING MACHINES, CONTINUOUS
Asarco/Ascast continuous copper billet caster, 12" (305mm), #12764 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
Ewen continuous caster, 6.5" W x 0.5" strip, 1/2" rod, #13009 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

COIL HANDLING EQUIPMENT
LEVELERS, PRECISION ROLLER (Also See Levelers, Tension)
9" x 1-7/8" Waterbury-Farrel leveler, 9 rolls 4 over 5, #11181 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
34" Ungerer, 17 roll, backed up 4 high leveller, #11271 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

COIL HANDLING EQUIPMENT
RECOILERS
2000 lb. Progressive #620-SM-RH, traversing take up, #10579 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
20000 lb. Paxson, 48" , with overarm separator, 60 HP, #6583 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

COIL HANDLING EQUIPMENT
UNCOILERS, Including Reels, Centering
15000 lb. Yoder, 16" ID x 42" wide sliding base, #7787 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
20000 lb. Paxson, 40" wide, 14" -16" ID, 5 HP DC, sliding base, #10608 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

COIL HANDLING EQUIPMENT
UPCOILERS
3" x 14" Ruesch #141, 3 roll, 24" maximum coil OD, DC drive, #8000 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
4" x 28" Torrington 20" arm carrier rolls 2-5/8" diameter, bending rolls 4" diameter, #12792 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
4" x 28" Torrington, carrier rolls 2-1/2" x 28" , #113 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

DRAW BENCHES
40000 lb. (20 Tons) Bigwood Single Chain 9 meter draw length, #12459 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
50000 lb. Brookes single chain 2.5" bar draw bench, #12458 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
65000 lb. Montbard 3 die tube draw bench, #12585 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

EDGING LINES
6" x 4" Tishken #ST2-CO2, 2 stand, wire shaping & cut off, #12686 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
11" x 4-1/2" Tishken #STR-FLS-2, straighten & cut-off line, #12685 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

FURNACES & OVENS
HEAT TREATING FURNACES
32.5" W x 20" H x 80" L Rolock, gas fired pusher oven with quench tank, 1500°F, #12799 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
44" W x 54" H x 33" D T-M Vacuum Products, shelf dryer, #12819 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
52" W x 25" H x 37" D Corbett Ind, electric, #12816 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

FURNACES & OVENS
PUSHER TYPE FURNACES
108" W x 84" H x 216" L, Rapid Technology, 2300F pusher furnace, #11729 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

PRESSES, EXTRUSION (Also See Stretchers, Extrusion)
800 Ton, UBE oil hydraulic extrusion press, updated 2008, #13073 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
1800 Ton, Lombard, 150/203mm billet diameter, 1.5-38mm/sec extrusion speed, #12457 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
2000 Ton, Watson Stillman #3186-D, copper & rod press, #13086Visit Dealer's Equipment ListingRFQ

ROLLING MILLS & RELATED METALS INDUSTRIAL EQUIPMENT
ROLLING MILLS, BAR & ROD
Waterbury-Farrel, 10 stand tandem, .781" -.300" , 7" x 2" W, #11357 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

ROLLING MILLS & RELATED METALS INDUSTRIAL EQUIPMENT
ROLLING MILLS, SENDZIMIR
8-1/2" Waterbury-Farrel #ZR15-8-1/2, 12 high Sendzimir rolling mill, #1610 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
8-1/2" Waterbury-Farrel #ZR16 8-1/2, 12 Hi, 30 HP drive, 15 HP rclrs, #10018 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
13" (330mm) Waterbury Farrel #ZR33-13 Sendzimir reversing cold mill, #11622 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
37" (940mm) Waterbury-Farrel #ZR23-37, Sendzimir rolling mill, #13128 Camera iconVisit Dealer's Equipment ListingRFQ

ROLLING MILLS & RELATED METALS INDUSTRIAL EQUIPMENT
ROLLING MILLS, 2 HI
5" x 8" Fenn, 20 HP, dual winders, #12797 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
8" (204mm) x 8" (204mm) Fenn, 2 high, 20 HP, #13364 SpecSheetCamera iconRFQ
10" x 12" Waterbury-Farrel, 30 HP AC, individual hand lever screw downs, #13189 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

ROLLING MILLS & RELATED METALS INDUSTRIAL EQUIPMENT
ROLLING MILLS, 4 HI
1-1/2" x 6" x 6" Waterbury-Farrel, on rev, contact gauge, recoiler, #10019 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
1-7/8" x 8" x 8" Fenn, dual handwheels screwdown, rclr/payoff mill mounted, #6433 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
4" x 14" x 10" Morgan, 75 HP DC, power screwdowns, #10017 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
5" x 10" x 10" Stanat, bonding mill, 25 HP DC, power screwdowns, rclr, #10647 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
5" (127mm) x 14" (355mm) x 16" (406mm) Lewis, 4 Hi rolling mill, #13060 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
9" (228mm) x 24" (610mm) x 24" (640mm) Non-Reversing 4 Hi rolling mill, #12176 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

SAWS, CUTOFF, Also See Cut Off Machines, Tube
3" Productive Systems, circular tube cut-off, 3.14" O.D. tube diameter, 13.7" blade, #5667 Camera iconVisit Dealer's Equipment ListingRFQ

SLITTING LINES
10" x 2-5/8" National Standard slitting line, finger set up, #12674 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
12" x 2-5/8" Ruesch #76, dual arm take up common base, #12673 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
14" x 1-1/4" Ruesch #189, ring slitting line 0.012" - 0.0005" , #13054 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
24" x 4-1/8" Ruesch #146, 6000 lb. coils, ring type, #12672 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
36" x 4-1/2" Yoder #M2, slitting line, #6050 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
36" x 5" Paxson, 3-interchangeable heads, 20000 lb. complete line, #11230 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
50" (1270mm) x 6" (152mm) McKay slitting line, #12956 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
63" Cameron type #648, paper/foil slitting line, #10220 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

STRAIGHTENERS, BAR, PIPE & TUBE (Also See Levelers, Roller)
1-3/8" Bigwood #RS, Square MS, 2 section straightener, #12462 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
2-1/4" Bronx #BR4, 2 roll rotary straighener, #12556 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
2-1/2" Bronx #HDT2, 7 roll straightener, #12692 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
Fenn, single plane feed/straightener, #12886 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

SWAGING MACHINES (Swagers)
5/16" Torrington #111, 2 die swager 1/8" solids, #13119 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
7/16" Torrington #2, 2 die rotary, 3/16" solids, #12187 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
3/4" Torrington #3, 2 die rotary, 3/8" solids, #11023 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
7/8" Torrington #312, 2 die rotary, 3/8" solids, #12201 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
1" Fenn #2F-2, 2 die rotary swager 13/32" solids, #13118 Camera iconVisit Dealer's Equipment ListingRFQ
1-1/2" Abbey-Etna #1515RA, 2 die, 15" die length, #11443 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
1-1/2" Torrington #4318, 2-die, 18" die length, 1-1/2" tube capacity, #10583 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
1-3/4" (44mm) Fenn #3-1/2F-6 1/2" (165mm) 2 die rotary, #11697 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
1-3/4" Fenn #3F-2, 2 die rotary swager, 5/8" solids, #13117 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
2" Fenn #4-1/2F, 15" long, 2 die, #10580 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
2" Mitchell, 12500 lb., hydraulic push pointer, #11228 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
2" Torrington #4315, 2-die, 15" die length, 2" tube capacity, #11216 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
2-1/8" Standard / Fenn #4A, 2 die, 1-1/8" tube capacity, 5/8" solids capacity, #6805 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
2-1/4" Fenn #4FSA, stationary die, 2-1/4" tube capacity, 15/16" solids capacity, #10821 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
2-1/4" (57mm) Fenn #4FSA, stationary die alternate blow solid 15/16" , #11977 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
2-1/4" Torrington #433, 2 die rotary, 5/8" solids, #13247 Camera iconVisit Dealer's Equipment ListingRFQ

TRANSFER MACHINES, ROTARY, DRILL & TAP
Namco #RV6, CNC rotary transfer machine, 2001, #11495 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

TUBE END FINISHING & FORMING MACHINES
2" Mitchell #PP512, 2 station reservoir tube forming machine, #10397 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

TUBE MACHINERY
COILERS, TUBE
Schumag pancake coiler, 1/4" -1-1/8" (6-28mm) OD, 60-100 Ft., 22 KW, #13395 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

TUBE MACHINERY
CUT OFF MACHINES, TUBE & PIPE (Also See Cut Off Machines)
1/8" - 1-3/4" Bertolette #315, tube cut off line, #11445 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

TUBE MACHINERY
DRAW & TUBE BLOCKS, TUBE
8" Vertical Capilllary Tube Draw block, 10 HP hydraulic drive 0.080" -0.040" , #1832 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
24" (610mm) Marshall Richards Pull 2000 lb., inverted, #8063 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
54" (1370mm) Marshall Richards H54T, horizontial tube block, 113 kW, #12588 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

WIRE MACHINERY
BULL BLOCKS, WIRE
12" Vaughn #8SD, 10/13 HP DC, #10536 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
20" Macbee #20SWBB-2 bull block single die, #11936 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
22" (556mm) Showa, single deck bull block, 30 HP VFD, #13298Visit Dealer's Equipment ListingRFQ
22" (556mm) Vaughn Double deck bull block, 30 HP VFD, #13299 Camera iconVisit Dealer's Equipment ListingRFQ

WIRE MACHINERY
DRAWERS, WIRE
Fenn #BB-14, 6-Blocks, 14" Diameter Blocks, 0.187" -0.025" , #11186 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
Morgan, 5 block, type C, 16" diameter blocks, 25 HP, #10184 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
Vaughn Motoblox #5HR, 15 HP per block, 16" int.med. blocks, 22" finish, #5366 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
Vaughn Motoblox #6HIV, 6 block, 10 HP per block, .030" -.218" , #6848 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

WIRE MACHINERY
DRAWERS, IN-LINE, WIRE
Fastener Engineering #DTM-03-20, 20" , #11934 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
Fastener Eng, vari-drive, 20" da -03-2020, #4989 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
RMG #34-05132075, 20" , in-line wire drawer, 0.187" -0.250" capacity, #10006 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

WIRE MACHINERY
FLATTENING MILLS, WIRE
3/4" x 4" x 2" BHS Torin #2/4 hi wire flattening mill, Vollmer gauges, #11722 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
4" x 1" Accurate wire flattening mill w/traverse winder, #11852 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
6" x 1-1/2" Stanat, 2-hi wire flattening, 15 HP DC, #12319 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
6" x 3-1/2" Tishken #STR30-C02HW, wire flattening & cut off, #10421 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
6" x 4" Stanat, with straightener, payoff, take-up, #7144 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

WIRE MACHINERY
POINTERS, WIRE
1/2" Morgan #500, 9 groove continuous wire pointer, #11160 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

WIRE MACHINERY
TURKSHEADS, WIRE
BHS - Torin #165C, TH type, combination turkshead, #8006 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
Fenn #3U, standard speed universal type, #12050 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
Fenn #5U, universal type 0.437" max square, #11672 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ
Fenn #61, power driven turkshead, 30 HP DC, #8187 SpecSheetCamera iconVisit Dealer's Equipment ListingRFQ

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise