back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Wisconsin Metalworking Machinery

2207 S West Ave
Waukesha, WI 53189-7920
Platinum Level Dealer
Surplus Record Dealer Since 1986

About

Wisconsin Metalworking Machinery, for more than 30 years, has been serving customers both locally & globally by providing pre-owned machine tools. If we do not own the machine you are looking for, we will locate it utilizing our extensive network or industry contacts.

Our inventory is located in two facilities with a total square footage of 50,000 sq. ft. One of the buildings has 15 and 30 ton Cranes.

Wisconsin Metalworking Machinery is a Surplus Record Gold Level Dealer:

1. Stocking dealers with real inventories they own or control.
2. Have met Surplus Record's standards for ethical dealings with their customers since 1987.
3. Have been visited in-person by Surplus Record staff every year.
4. Enjoy nearly 34 years listing with Surplus Record without unresolved complaint or incident.

Products & Services

  • Boring Mills, Horz. & Vert.
  • Brakes, Press
  • Broaching Machines
  • CNC Machinery
  • Drills
  • Grinders
  • Lathes
  • Lathes, CNC
  • Machining Centers, CNC
  • Milling Machinery
  • Presses
  • Saws
  • Shears
  • Tooling & Accessories
  • Welding Manipulators, Positioners, & Turning Rolls

Associations & Affiliations

Additional ContactsAddressPhone
J.R. KraemerMilwaukee, WI262-548-6080
107 listings in 60 categories

12" x .25" Feed-Lease #FL-4-12X24, mounted, 24" lgth, 12" width, 5-roll, double air grippers

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Air Feeders
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Feed-Lease
GENERAL :MANUFACTURER......... FEED LEASEMODEL............ FL-4-12 X 24CAPACITY........... .250" X 12"FEED LENGTH......... 24"FEED WIDTH.......... 12"EQUIPPED WITH:DOUBLE AIR GRIPPERS5 ROLL ...more

Bar, Pipe and Tube Benders

1 Result

Pines #1, tube bender, Dial-A-Bend, Plane Of Bend, mandrel extractor, counter clock wise, tooling, 7.5 HP, 1975

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Pines
Model: -1
Year: 1975

Belt Sanders

2 Results

6" x 48" Rockwell #31-520, belt sander, blower, 1/2 HP blower motor, 480 V., 3-phase

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Belt Sanders
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Rockwell
Model: 31-520
GENERAL MAKE......... ROCKWELL. MODEL......... 31-520. SERIAL NUMBER..... EZ-1302. BELT WIDTH...... 6". ELECTRICS....... 480V/3PH. DIMENSIONS...... 36" X 36" X 72".

36 Burlington #S36X75, dust collection hood, 25 HP, abrasive belt tensioning with single pneumatic cylinder

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Belt Sanders
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Burlington
Model: S36X75
GENERAL :MAKE.......... BURLINGTONMODEL......... S36X75BELT WIDTH....... 36"CONVEYOR ROLL DIA... 6.5"DIA. RAISING SCREWS.. 5/8"MAIN MOTOR....... 25 HPBELT FEED MOTOR.... 1 ...more

Colmet #EIB-06-08-05-MD, spray booth w/ Titan Amu TA-112 NG HRD, 2018

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Colmet
Model: EIB-06-08-05-MD
Year: 2018
GENERAL :MAKE......... COL-METMODEL........ EIB-06-08-05-MDAGE (YEAR)...... 2018DIMENSIONS INTERIOR. 6' X 5'6" X 8' HDIMENSIONS EXTERIOR. 6' 4" X 6' ...more

4.3" Kuraki #KBT-1101P, 84" x59" x72" x31" trvls, 12-1200 RPM, 49" x78" tbl., 1979

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Kuraki
Model: KBT-1101P
Year: 1979
GENERAL :MAKE.............. KURAKIMODEL.............. KBT-1101PSERIAL NUMBER.......... 1239AGE (YEAR)........... 1979SPINDLE DIAMETER........ 4.33" (110 MM)SPINDLE TAPER.......... CAT #50SPINDLE TRAVERSE........ 31.5" (800 ...more

4.3" Toshiba #BTD-11B-R3, 55" x63" rotary table, 78" X, 59" Y, 59" Z, 24" W, #50, Sony digital read out, 1985

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Toshiba
Model: BTD-11B-R3
Year: 1985
GENERAL MANUFACTURE.............. TOSHIBA. MODEL................. BTD-11B-R3. SERIAL NUMBER............. 173627. NEW.................. 1985. SPINDLE DIAMETER........... 4.30". X-TRAVEL............... 78". Y-TRAVEL............... 59". ...more

C Frame Hydraulic Press Machines (Gap Frame)

1 Result

110 Ton, Cole-Tuve #CF-110, 11.8" stroke, 19.6" daylight, 7.88" Shut Height, 10.2" throat, dual palms, variable speed, 2003

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Cole-Tuve
Model: CF-110
Year: 2003
GENERAL : MANUFACTURER.......... COLE-TUVE MODEL............. CF-110 SERIAL NUMBER......... CF/SB-1-22003 AGE.............. 2003 TONNAGE............ 110 TONS STROKE (ADJ.)......... .25" TO ...more

Carbide, Friction and Cold Saws

1 Result

21" Promacut #UNI-9-15, 15 HP, 3000 RPM, 3' x 6' table, blade sharpener

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Promacut
Model: UNI-9-15
GENERAL MAKE......... PROMACUT / (TRENNJAGER)MODEL......... UNI-9-15SERIAL NUMBER..... GA 431BLADES SIZE (DIA)... 21"MOTOR......... 15 HPBLADE SPEED...... 3000 RPMBLADE TRAVEL..... ...more

CNC Gear Hobbing Machinery (Hobbers)

1 Result

Liebherr #LC255, 5-Axis, gear hob, 3.937" bore diameter, Fanuc 18i-MA, rblt/retrofit 2006

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Liebherr
Model: LC-255
Year: 1992
This machine was recontrolled by Machine Tool Builders in 2006 with a Fanuc 18i-MA CNC and Fanuc Alpha ...more

CNC Horizontal Boring Mills - Table Type

2 Results

3.94" Toshiba Shibaura #BTN-10B, CNC horizontal boring mill, 44" x49" T-slot table, 1977/retrofitted 2012

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Toshiba
Model: BTN-10B
Manufacturer................... Toshiba ShibauraModel...................... BTN-10BAge....................... 1977/retrofitted 2012Serial Number.................. 143323Spindle ..................... 3.94”Spindle Taper .................. 50 TaperSize of T-slotted Index Table ...more

4.7" Scharmann, CNC horizontal boring mill table, Heidenhain TNC415B, 39" x5" tbl., #50, power draw bar, 1972, retrofitted 1999

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Scharmann
Model: 50
Year: 1975
GENERAL :MANUFACTURER............ SCHARMANNMODEL................ FB 100NEW (APPROX.)............ 1975RETROFITTED............. 1996SERIAL............... 75144257SPINDLE DIAMETER.......... 4.7" TAPER IN SPINDLE.......... #50 CATTABLE SIZE............. 39" ...more

CNC Lathes and Turning Centers

5 Results

Hitachi-Seiki #HiCell-40, 27.6" max. swing, 15" chuck, 3-jaw, 4.7" hole, live tooling, 20-1800 RPM, Y-Axis, 1997

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Hitachi-Seiki
Model: HICELL-40
Year: 1997
GENERAL :MAKE................. HITACHI SEIKIMODEL................ HIGHCELL 40SERIAL NUMBER............ CA-40069AGE (YEAR).............. 1997MAX SWING.............. 27.6" (700 MM)CHUCK DIAMETER (3 JAW)....... ...more

Mazak #M4N, CNC lathe, 22" swing, 15" chuck, 3-jaw, 3.1" bore, JIS A2-8, Mazatrol 640T PC-Fusion, tailstock, 1999

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Mazak
Model: M4N
Year: 1999

Mazak #QT-250, CNC lathe, 10" chuck, Mazatrol 640T PC Fusion, chip conveyor, 2001

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Mazak
Model: QT-250
Year: 2001
GENERAL.

Mori-Seiki #SL-8, 39.3" swing, 32" chuck, Fanuc 21iT, 553 RPM, conveyor, 1980 rebuilt 1998, #9495

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Mori-Seiki
Model: SL-8
GENERAL.

Okuma #LU3000 V8CAM, CNC lathe, 19" swing, 2.4" bore, 6.3" diameter, 18.9" length, 6k RPM, A2-6, 4 Axis, OSP-E100L, 2004

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Okuma
Model: LU-3000
Year: 2004
GENERAL :MANUFACTURER........... OKUMAMODEL.............. LU300 V8CAMSERIAL NUMBER.......... 111793AGE............... 2004SWING.............. 19.69"MAX. TURNING DIAMETER...... 6.30"MAX. WORK LENGTH......... 18.9"MAX. WORK PIECE WEIGHT...... ...more

CNC Press Brakes

1 Result

230 Ton, Cincinnati #230AS, 14.5' overall, 174" between housing, 10" stroke, PC800 CNC, 26" BG, automatic crown, 1990

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Cincinnati
Model: 230AS
Year: 1990
GENERAL.

40 Ton, Whitney #3400XP, CNC punch / plasma, Siemens 840DI, hypertherm HPR 260 plasma, 2007

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Whitney
Model: 3400XP
Year: 2007

72" x 108" Giddings & Lewis, Hydrostatic, 72" CNC Control, sub-slide, 25500 part.weight, #8410

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Giddings & Lewis
GENERAL.

CNC Vertical Boring Mills – including VTLs

2 Results

28.7" Daewoo Doosan #V550, CNC vertical turret lathe, Fanuc 21ITB, 20-2000 RPM, 50 HP, chip conveyor, 2005

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Daewoo Doosan
Model: V550
Year: 2005

590.5" Froriep #Schiess CNC vertical boring mill, Siemens 840D, 393.37" tbl diameter, rebuilt & CNC retrofit' 99

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Froriep
Model: SCHIESS
SCHIESS FRORIEP 590.55" VTL, CNC VERTICAL BORING MILL, SIEMENS 840D CNC CONTROL, 1999. Stock Number: 9705.

Coordinate Measuring Machines (CMM)

1 Result

Zeiss #UPMC-Ultra, coordinate measuring machine, 850mm-X, 1150mm-Y, 600mm-Z, 4th Axis rotary table, 2011

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Zeiss
Model: UPMC-ULTRA
Year: 2011
MAKE........ ZEISS. MODEL....... UPMC ULTRA. SERIAL NUMBER... 132910. X MEASURING RANGE. 850 MM. Y MEASURING RANGE. 1150 MM. ...more

Deburring Machines

2 Results

Steelmaster #Prima 2KB-9W, 37.4" abrasive belt width, 129" abrasive belt length, 29-59 FPM conveyor speed, dry pass thru sander, additional brush head, just taken from service, 2000

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Steelmaster
Model: 2KB-9W
Year: 2000

Steelmaster #Prima-SPW109RE, 37.4" width, single belt deburring machine, wet, PLC, 2007

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Steelmaster
Model: PRIMA-SPW109RE
Year: 2007
GENERAL . MANUFACTURER............ STEELMASTER. MODEL............... PRIMA SPW109RE. Serial Number............ 0-418-26-0079. AGE................ 2007. Maximum Abrasive Belt Width.... 37.4″. Maximum ...more

Disintegrators (Including Tap Disintegrators)

1 Result

Uni-Tek (Electro Arc) #300-S1, tap disintegrators, servo feed, 360 swivel head & arm

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Uni-Tek
Model: 300-S1
GENERAL MANUFACTURER........... UNI-TEK (ELECTRO ARC). MODEL............... 300-S1. SERIAL #............. 81289. TABLE SIZE............ 30"LR x 30"FB. # OF ...more

25" x 310" Tos Celakovice #SUS-63, engine lathe, 16" chk, 3" bore, tailstock, Sony digital read out, Steady Rest

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Engine Lathes
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Tos
Model: SUS-63
GENERAL :MAKE......... TOS CELAKOVICEMODEL........ SUS 63SERIAL NUMBER.... 0450147AGE (YEAR) APPROX..SWING........ 25" (630 MM)SWING O.C.S..... 14"CENTER DISTANCE... 310"SPINDLE SPEEDS.... ...more

25" x 310" Tos #SUS-63, engine lathe, 14" swing over cross slide, 16" chuck, 3-jaw, 3" hole, tailstock, Sony digital read out, 3 Steady Rest

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Engine Lathes
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Tos
Model: SUS-63
GENERAL :MAKE......... TOS CELAKOVICEMODEL........ SUS 63SERIAL NUMBER.... AGE (YEAR) APPROX..SWING........ 25" (630 MM)SWING O.C.S..... 14"CENTER DISTANCE... 310"SPINDLE SPEEDS.... ...more

Flangers

1 Result

3/8" Blue Valley, flanger, 54" throat, 16"-54" blank support arm, 15 HP drive, new electrics

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Flangers
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Blue Valley
GENERAL :THROAT DEPTH............. 54"CAPACITY............... 3/8"DISTANCE FROM REAR SUPPORT TO FLANGER MAX............... 54" ...more

4500 lb. Crown Narrow #45RRTT, aisle stand up rider electric forklift, 24" reach, 198" lift, 1989

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Forklifts
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Crown
Model: 45RRTT
Year: 1989
GENERAL :MAKE............ CROWNMODEL............ 45RRTTSERIAL NUMBER........ W91388FUEL............ 36 VOLT ELECTRICCAPACITY.......... 4500 LBS.MAX FORK HEIGHT....... 198" REACH............ 24"FORK LENGTH......... 48"MACHINE ...more

Viper #HB-2190S, CNC gantry machining center, Mits 500, 78.7" X Travel, 77.5" Y Travel, 7.8" -35.4" Z, 3800 RPM, 30 automatic tool changer, 1999

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Viper
Model: HB-2190S
Year: 1999
GENERAL MANUFACTURER............. MIGHTY VIPER. MODEL................ HB-2190S. AGE................. 1999. TABLE SIZE.............. 59" X 82". TRAVELS X.............. 78.7". ...more

Gear Hobbing Machine For Bevel, Helical, Spur and Worm

1 Result

Barber-Colman #14-15, gear hobber w/large selection of change gears, 3.5 DP, coolant

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Barber-Colman
Model: 14-15
GENERAL :MANUFACTURER........... 14-15SERIAL.............. 783MAXIMUM DP............ 1 CUT 3.5 DPMAXIMUM RATED WORK DIAMETER... 14"MAXIMUM TRAVEL OF HOB SLIDE... 15"DIS. ...more

14" x 14" Kasto #HBA360AU, horizontal band saw, 210" x1.5" x.050" blade, 7.5 HP, powered chip conveyor

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Kasto
Model: HBA360AU
GENERAL :MAKE............. KASTOMODEL............ HBA 360 AUSERIAL NUMBER........ 6016108124AGE (APPROX)......... 1990S?CAPACITY SQUARE....... 14" X 14"CAPACITY ROUND........ 14"SHUTTLE STROKE........ 23.6"BLADE ...more

Horizontal CNC Machining Centers

8 Results

Daewoo Doosan #HP5100, 33.5" X, 27.6" Y, 29.5" Z, 19.7" pallets, 60 automatic tool changer, 12000 RPM, Fanuc 3li, 2010

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Daewoo Doosan
Model: HP5100
Year: 2010
GENERAL.

Enshu #JE80S, 60 automatic tool changer, 31" X, 31" Y, 31" Z, 15000 RPM, 2 pallet, Fanuc 18iMB, thru spindle coolant, 2006

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Enshu
Model: JE80S
Year: 2006
GENERAL.

Haas #EC-1600-3X, 30 automatic tool changer, 64" X, 40" Y, 32" Z, 6000 RPM, CT50, 30 HP, coolant thru spindle, linear scales, 4th Axis interface, 2005

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Haas
Model: EC-1600-3X
Year: 2005
:MANUFACTURER ...more

Mighty Viper #HMC-500, horizontal machining center, Fanuc 18M, thru spindle coolant, 21.7" X, 20" Y, 23.6" Z, 40 ATC, 10000 RPM, (2) 19.7" pallets, 4th Axis rotary, 2004

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Mighty Viper
Model: HMC-500
Year: 2004
GENERAL.

Mori-Seiki #NH-5000/40, 60 automatic tool changer, 24.8" X, 23.6" Y, 26.3" Z, 14000 RPM, #40, 2003

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Mori-Seiki
Model: NH-5000/40
Year: 2003
GENERAL.

Mori-Seiki #NH-5000/40, 60 automatic tool changer, 24.8" X, 23.6" Y, 26.3" Z, 14000 RPM, #40, 2003

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Mori-Seiki
Model: NH-5000/40
Year: 2003
GENERAL.

Mori-Seiki #NH-5000/40, 60 automatic tool changer, 24.8" X, 23.6" Y, 26.4" Z, 14000 RPM, #40, MSC-501, 2003

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Mori-Seiki
Model: NH-5000/40
Year: 2003
GENERAL.

Mori-Seiki #SV-50B/40, 30 automatic tool changer, 31.5" X, 20" Y, 20" Z, 10000 RPM, #40 taper, Fanuc 18M, 1997

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Mori-Seiki
Model: SV-50B/40
Year: 1997
: . Manufacturer.............. Mori Seiki. Model................. SV-50B/40. Serial number............. 786. New.................. 1997 . Pallet Size.............. 47" x 19".

Horizontal Hones

1 Result

Sunnen #MBB-1650K/C, precision horizontal hone, 16" stroke, 6.5" mandrel diameter, misc. tooling

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Sunnen
Model: MBB-1650K/C

Hydraulic Power Units

2 Results

5 HP Oilgear Co. / Vickers, 75 HP, hydraulic power unit, 3/4 HP oil circulation motor

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Oilgear

7.5 HP Rexroth #Petraulic-32, hydraulic power unit, 40 gallon tank, 1988

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Rexroth
Year: 1988

Hydraulic Press Brakes

5 Results

70 Ton, Heim #70-8, brake press, 8' overall, 78" between housing, die rail, 3" stroke, 12" shut height, 8" throat, 15" open height, air clutch, foot pedal, flush floor, 1972

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Heim
Model: 70-8
Year: 1972
GENERAL MANUFACTURER........... HEIM. MODEL............... 70-8. SERIAL NUMBER........... 273. AGE................ 1972. CAPACITY NEAR BOTTOM....... 70 TON. ...more

150 Ton, Pacific #150-12, brake press, 12' overall, 126" between housing, Hurco IV Control, 10" stroke, 1966

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Pacific
Model: 150-12
Year: 1966
GENERAL MANUFACTURER........... PACIFIC. MODEL............... 150-12. SERIAL NUMBER........... 3098. AGE................ 1966. CAPACITY............. 150 TON. LENGTH OF BED........... 12' ...more

175 Ton, Cincinnati #175ASX10, hydraulic press brake, 12' overall, 126" between housing, 10" stroke, 8" throat, 17" open, PC Control, flush floor, 1990

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Cincinnati
Model: 175ASX10
Year: 1990
GENERAL :MAKE........... CINCINNATIMODEL.......... 175AS-10SERIAL NUMBER...... 45007AGE (YEAR)........ 1990OVERALL BED LENGTH.... 144"DIST. BTWN. HOUSINGS... 10' 6"BENDING CAPACITY..... 175 TONSSTROKE.......... ...more

350 Ton, Cincinnati #350AFX10, hydraulic press brake, 10' overall, 126" between housing, 10" str, 18" open, 1990

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Cincinnati
Model: 350AFX10
Year: 1990
GENERAL :MAKE........... CINCINNATIMODEL.......... 350AF-10SERIAL NUMBER...... 46839AGE (YEAR)........ 1990OVERALL BED LENGTH.... 144"DIST. BTWN. HOUSINGS... 10' 6"TONNAGE......... 350BENDING CAPACITY..... 3/4" ...more

500 Ton, Cincinnati #500FMx14, hydraulic brake, 18' overall, 173.75" between housing, in plant, under power, 1990

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Cincinnati
Model: 500FMX14
Year: 1990
GENERAL :MAKE........... CINCINNATI MODEL.......... 500FM X 14 AGE (YEAR)........ 1990OVERALL BED LENGTH.... 18' (216")DIST. BETWEEN HOUSINGS.. ...more

110 Ton, Greenerd #HC-110-21R, hydraulic press, 11.8" stroke, 19.7" daylight, variable speed, 23" x43" bed, 1977

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Greenerd
Model: HC-110-21R
Year: 1977

200 Ton, Danly #CH-200-36-44, hydraulic press, 24" stroke, 53" daylight, 36" x44" bed, 24" str, 53" DL, Hydrapower

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Danly
Model: CH-200-36-44
GENERAL :MANUFACTURER............. DANLYMODEL................ CH-200-36-44SERIAL................ 62173301TONNAGE............... 200BED AREA............... 36" X 44"BOLSTER AREA............. 36" X 44" X 5"BED OPENING............. 29" ...more

200 Ton, Phoenix #OGP200, upacting hydraulic press, 36" x 29" table, 24" stroke, SPX model B ram cylinder, operator pendant Control, digital read out, 2009

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Phoenix
Model: OGP200
Year: 2009
CAPACITY: Press Capacity............ 200 Ton Table ...more

1 Ton, Cantilever, beam mounted jib crane, 17' arm, Dayton electric chain hoist

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Jib Cranes
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Cantilever
1 ton Cantilever jib crane with Dayton 1 ton chain hoist. 8 available at $1,950 each.

Keyseaters

1 Result

2" -15" Mitts & Merrill #3A, keyseater, 1951

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Keyseaters
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Mitts & Merrill
Model: 3A
Year: 1951
GENERAL :MANUFACTURER............. MITTS & MERRILLMODEL................. 3ASERIAL................ E13929-11-51NEW APPROXIMATELY........... 1951MAXIMUM KEYWAY CAPACITY........ 2" X 15"TABLE................. 19-1/2" X 17-1/2"EQUIPPED WITHCHIP ...more

Lathe Chucks

1 Result

18" Samchully #HC-18D, 3-Jaw, hydraulic chuck, A2-11, unused

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Lathe Chucks
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Samchully
Model: HC-18D
18" SAMCHULLY 3 JAW HYDRAULIC CHUCK, MODEL HC-18D, A2-11, UNUSED. Inventory ID: 9839.

Magnetic Chucks

1 Result

30" x 60" Magna Lock #HII-3060, electric chuck w/ Demag

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Magnetic Chucks
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Magna Lock
Model: HII-3060
GENERAL :MANUFACTURER.......... MAGNA-LOCKMODEL............. HII-3060SERIAL NUMBER......... 41749CHUCK SIZE........... 30" X 60"CHUCK HEIGHT..........VOLTAGE............ 230AMPERAGE............ 7.5INCLUDES VARIABLE DEMAGNETIZING UNIT.

Mechanical Press Brakes

1 Result

120/80 Ton, Chicago #1012M, mechanical brake, Autogauge CNC, 12' overall, 126" between housing, 35 SPM

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Chicago
Model: 1012M
GENERAL :MANUFACTURER............... CHICAGO DRIES & KRUMPMODEL.................. 1012MSERIAL NUMBER.............. L-17781CAPACITY NEAR BOTTOM STROKE....... 120 TON MIDSTROKE................ 80 TONRATED BENDING ...more

Miscellaneous Furnaces, Ovens and Parts

1 Result

Curing Oven, Despatch #L-3048-5, 5-drawers, 550 Degrees Fahrenheit, 2400 cfm recirculating system, 1969

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Despatch
Model: CURING OVEN
Year: 1969
MAKE........ DESPATCH. MODEL........ L-3048-5. NUMBER OF DRAWERS.. 5. DRAWER HEIGHT.... 8". DRAWER WIDTH.... 30". DRAWER LENGTH.... 48". TEMPERATURE..... ...more

Notching Machines

2 Results

.165" x 8.875" x 8.875" Boschert #LB14, hydraulic, 1.417" str, coping attachment, 1996

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Boschert
Model: LB14
Year: 1996
GENERAL MANUFACTURER.......... BOSCHERT. MODEL............. LB14. AGE.............. 1996. SERIAL NUMBER......... 91. MACHINE WEIGHT......... 1700 LBS. STATION 1 . ...more

1/4" x 8-5/8" x 8-5/8" Amada #CSH-220, hyd notcher, 23 ton, 7/8" stroke variable speed, foot pedal, 1979

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Amada
Model: CSH-220
Year: 1979
GENERAL :MAKE........... AMADAMODEL.......... CSH-220SERIAL NUMBER...... 550385AGE (YEAR)........ 1979CAPACITY (TONNAGE).... 23 TONSCAPACITY (THICKNESS)... 1/4"CAPACITY (LENGTH).... 8 5/8" X 8 ...more

Optical Comparators

1 Result

14" Jones & Lamson #Epic-214, optical comparator, digital read out, 8.5" x32" tbl., 6 pos. optics

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Jones & Lamson
Model: EPIC-214
GENERAL :MANUFACTURER.............. JONES & LAMSON (J&L)MODEL.................. EPIC-214TABLE SIZE............... 8.5" X 32"SCREEN DIAMETER............. 14"HORIZONTAL MEASURING.......... 12"VERTICAL MEASURING........... 9"ANGLE MEASURING ...more

Hendrick #126, woodworking panel saw, 126" cut length, 48" part pusher

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Panel Saws
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Hendrick
Model: 126

1/4" x 12' HTC #250-12A, hydraulic shear, 36" front operated power back gauge, 92" squaring arm, flush floor, adj. rake, 1972

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Htc
Model: 250-12A
Year: 1972
GENERAL :MANUFACTURER.............. HTCMODEL................. 250-12ANEW.................. 1972SERIAL................. A372258NOMINAL CAPACITY MILD STEEL...... 1/4" x 12NUMBER OF HYDRAULIC HOLD DOWNS..... 13OVERALL SIZE ...more

1/4" x 12' Wysong & Miles #1225, CNC front & rear Back Gauge, mechanical, 36" FOPBG, squaring arm, 15 HP, 1984

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Wysong
Model: 1225
Year: 1984
GENERAL :MANUFACTURER ........... WYSONGMODEL ............... 1225SERIAL............... #P28-268NEW ................ 1984TYPE................ MECHANICALCAPACITY (MILD STEEL) ....... 1/4"CAPACITY (STAINLESS)........ 7 GA.CUTTING LENGTH........... ...more

1/4" x 14' Standard #AS250-14, hydraulic shear, 15 holddowns, front operated power back gauge, flush floor mount, 24" squaring arm, 1993

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Standard
Model: AS250-14
Year: 1993
GENERAL :MANUFACTURER.............. STANDARDMODEL................. AS250-14NEW.................. 1993SERIAL................. 293278 NOMINAL CAPACITY MILD STEEL...... 1/4" x 14'OPERATION............... HYDRAULIC NUMBER OF ...more

Reciprocating Surface Grinders - Horizontal Spindle

4 Results

6" x 18" Harig #618-Autostep, Accu-Rite VUE digital read out, programmable plunge, 7" x.5" x1.25" wheel, automatic incremental downfeed, 2008

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Harig
Model: 618-AUTOSTEP
Year: 2008
MAKE.............. HARIGMODEL.............. 618 AUTOSTEPSERIAL NUMBER.......... 11228HAGE (YEAR) APPROX........ 2008CHUCK SIZE........... 6" x 18"STANDARD GRINDING WHEEL SIZE.. 7" x ...more

6.7" x 20" Harig Bridgeport #618-EZ-Surf, 6" x18" Walker magnetic chuck, 2-Axis digital read out, dust collector, 1998

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Harig
Model: 618-EZ-SURF
Year: 1998
GENERAL :MAKE.............. HARIG (BRIDGEPORT)MODEL.............. 618AGE (YEAR) APPROX........ 1998SERIAL NUMBER.......... 547-EZCHUCK SIZE........... 6" x 18"STANDARD GRINDING WHEEL SIZE.. 7" ...more

12" x 24" Chevalier #FSG-1224AD, 14" x2" x5" wheel, 10" x20" tbl, incremental downfeed, coolant, electromagnetic chuck, 1987

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Chevalier
Model: FSG-1224AD
Year: 1987
:MANUFACTURER................ CHEVALIERMODEL................... FSG-1224AD SERIAL NUMBER............... 36226YEAR.................... 1987Grinding capacity............. 12" x 24" Table size................. 10" x 20"Spindle centre t0 ...more

16" x 32" Okamoto #PSG-84, fully automatic, coolant, 31.5" x15.7" EMC, automatic down feed, 1979

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Okamoto
Model: PSG-84
Year: 1979
GENERAL MANUFACTURER.............. OKAMOTO. MODEL................. PSG-84. SERIAL NUMBER............. 8412. MAXIMUM GRINDING LENGTH........ 31.5". MAXIMUM GRINDING WIDTH......... 16". MAXIMUM ...more

100/110 psig, Sulliar #LS20-100SL/A/SUL 100, rotary screw air compressor, 100 HP, 2001

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Sulliar
Model: LS20-100SL/A/SUL
Year: 2001

Gardner Denver #VS110, rotary screw air compressor, 147 HP, 110 KW, variable speed, 460 V., 2008

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Gardner Denver
Model: VS110
Year: 2008
MANUFACTURER............ GARDNER DENVERMODEL............... VS110SERIAL NUMBER........... 5294324AGE................ 2008TYPE................ ROTARY SCREWDRIVE MOTOR............ 147.5 HP (110 KW)NOMINAL PRESSURE.......... 7.5 BAR, 10 ...more

60" x 84" Giddings & Lewis #60X84, heavy duty airlift rotary table, 30000 lb. capacity

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Rotary Tables
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Giddings & Lewis
Model: 60X84

96" x 144" Gidding & Lewi, airlift rotary table, remote operating pendant, air clamp

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Rotary Tables
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI

144" x 96" Lucas T-slotted table, 12.5" thick, 5 T-slots

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Rotary Tables
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Lucas

30 Ton, Lucas #30-35-28, 48" bed to ram, 29" btwn columns, power or manual downfeed

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Screw Presses
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Lucas
Model: 30-35-28
GENERAL MANUFACTURER............ LUCAS. SERIAL NUMBER............ 30-35-28. TONNAGE............... 30. OPEN HEIGHT............. 48". DISTANCE BETWEEN COLUMNS...... 29".

12" x .156" CWP #SMX-12, 5000 lb. Coiltek pallet style coil reel, ServoMax II, 1996

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Servo Feeders
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Cwp
Model: SMX-12
Year: 1996

Single Cranked Back Gear OBI Press Machines

4 Results

28 Ton, Walsh #28X, OBI press

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Walsh
Model: 28X

45 Ton, Minster #5, 3" stroke, 14" Shut Height, 2.75" adj., 120 SPM, Wintress Autoset 1500, air clutch

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Minster
Model: 5

60 Ton, Johnson #60, 3" stroke, 10-75 SPM, Wintress, 12" servo feed line, 22" x32" bed

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Johnson
Model: 60
GENERAL SPECIFICAITONS:MANUFACTURER........... JOHNSONMODEL............... 60TYPE............... FlywheelCAPACITY............. 60 TONBED SIZE............. 22" x 32" F/BSPEED............... 10 TO 75 SPMSTROKE.............. 4" ...more

60 Ton, Verson #D-60-OBI, 4" stroke, 14" Shut Height, 3" adj., 45 SPM, 32" x 21" bolster

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Verson
Model: D-60-OBI

Single Spindle Drill Presses

2 Results

15" Dayton #5PHC2, drill press, 1/2 HP, 128-3476 RPM, S/N 201005

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Dayton
Model: 5PHC2
GENERAL MAKE............ DAYTON. MODEL............ 5PHC2. SERIAL NUMBER........ 201005. CAPACITY.......... 15". MOTOR............ 1/2 HP. SPINDLE SPEEDS....... 138-3476 RPM.

Leland-Gifford drill press, 17" x12.5" table, 4.5" stroke, 8" vert adjustment, coolant

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Leland-Gifford
GENERAL.

32" x 120" Timemaster /Gurutzpe #Super-RT3000/400, F & R 10" hole chuck, 500 RPM, 1982

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Timemaster
Model: SUPER-RT3000/400
Year: 1982
GENERAL.

Steady Rest, 18.5" dia. thru hole, 2.5"-12.5" part capacity, 13" W of base, 18.5" centerline height

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Steady Rests
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
GENERAL :THROUGH HOLE SIZE..... 18.5"MAX PART CAPACITY..... 12.5"MIN PART CAPACITY..... 2.5"WIDTH OF BASE APPROX.... 13"CENTERLINE HEIGHT APPROX.. 18.5" ...more

Steady Rest, 27" dia. thru hole, 13"-21.5" part capacity, 13.5" W of base, 19" centerline height

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Steady Rests
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
GENERAL :DIAMETER THRU HOLE.... 27"MAX PART CAPACITY..... 21.5"MIN PART CAPACITY..... 13"WIDTH OF BASE....... 13.5"CENTERLINE HEIGHT APPROX. 19" SUBJECT ...more

Steel Slat and Chip Conveyors

1 Result

29" x 164" Sungwoo #VTC-16/20, chip conveyor, 220 V., 44" discharge height

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Sungwoo
Model: VTC-16/20
GENERAL :MAKE......... SUNGWOOMODEL......... VTC 16/20SERIAL NUMBER..... 01205601LINK WIDTH...... 400 MMELECTRICS....... 220 VTOTAL DIMENSIONS... 164" x 29" x 70" ...more

Miller #Syncrowave-250, tig welder, Bernard cooler, gun, cart, foot Control

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Tig Welders
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Miller
Model: SYNCROWAVE-250

Royal Oak #R.O., universal form relief grinder, 8" x30" table platen, 5" grinding wheel diameter

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Royal
Model: R.O.
GENERAL MAKE......... ROYAL OAK. MODEL......... R-O. SERIAL NUMBER..... 843G. TABLE PLATEN..... 8" X 30". GRINDING WHEEL DIA.. 5".

Turntable Parts Washers

1 Result

ADF #860, front load Stainless Steel parts washer, 42" table, 36" working height, 160 Degrees Fahrenheit, 440 V., 1991

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Adf
Model: 860
Year: 1991

7.5 Ton, DiAcro #Stylus-18, turret punch

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Turret Punches
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Diacro
Model: STYLUS-18
GENERAL :MANUFACTURER........... DIACROMODEL............... 18SERIAL NUMBER........... BE1251PUNCHING PRESSURE......... 7.5 TONSPUNCHING CAPACITY......... 2" IN 16 GAUGETHROAT DEPTH........... 19"NUMBER OF STATIONS........ ...more

Ultrasonic Parts Washers

1 Result

Better Eng., impulse parts washer, 29" basket, 40" part hght, 1000 lb.

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Better Eng.
GENERAL :MANUFACTURER........... BETTER ENGINEERINGBASKET SIZE............ 29"MAX. PART HEIGHT......... 40"MAX. WEIGHT............ 1,000 LBS.

4000 lb. Durant #MD-401, unmotorized reel, 16" width, 54" -60" OD, 15"-20" ID, 6 coil keepers, brake

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Durant
Model: MD-401
GENERAL :MANUFACTURER.......... DURANTMODEL.............. MD-401MAX. COIL CAPACITY....... 4,000 LBSMAX. COIL DIAMETER....... 54" - 60" O.D.MAX. COIL WIDTH......... 16"COIL ID ...more

4000 lb. Egan Press Partner #M401, motorized coil reel, 20" width, 60" outside dimensions, 16"-20" ID, 6 coil keepers, coil switch, 1 phase

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Egan
Model: M401
GENERAL :MANUFACTURER........... EGAN PRESS PARTNERMODEL.............. M401MAX. COIL CAPACITY........ 4,000 LBSMAX. COIL DIAMETER........ 60" O.D.MAX. COIL WIDTH......... 2O"COIL ID ...more

Universal Cylindrical Grinding Machines

2 Results

8" x 20" Shigiya #GU-20-50H, hydraulic universal grinder, internal attachment, 12" x1" x5" bore wheel

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Shigiya
Model: GU-20-50H
GENERAL :MANUFACTURER........... SHIGIYA MACHINERY WORKSMODEL............... GU-20-50HSERIAL NUMBER........... 20259SWING............... 8"CENTER DISTANCE.......... 20"MAX. GRINDING DIAMETER...... 8"MAX. WORK PIECE WEIGHT...... 44 ...more

10" x 20" Karstens #16AS, universal grinder, ID/OD spindles, 50-450 FPM, 16" grind wheel

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Karstens
Model: 16AS
GENERAL :MANUFACTURER............ KARSTENSMODEL............... 16ASSERIAL............... 1374SWING............... 10"CENTER DISTANCE.......... 20"FEED RANGE VARY.......... .000004 - .001MAX. WORK PIECE WEIGHT....... 175 LBS ...more

Red Point #E3018/D30/5SL/RTG, encapsulator vacuum potting chamber, 1.5 HP

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Vacuum Chambers
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
MAKE......... RED POINT. MODEL........ E3018/D30/5SL/RTG. SERIAL NUMBER.... 631G1-653. HORSE POWER..... 1.5. ELECTRICS...... 115/230 - SINGLE PHASE.

16" DoAll #ML, vertical bandsaw, 16" x 20" table, 7/16" x 120" blade

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Doall
Model: ML

18" x 20" Peerless #VBX-1820XL, semi-auto, 1" x.035" x174" blade, mitering, hyd. vise, 1994

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Peerless
Model: VBX-1820XL
Year: 1994
Manufacturer......... PeerlessModel............. VBX-1820XLSerial number......... 10509-94Age.............. 1994Capacity........... 18" x 20" Rectangle ...more

Vertical CNC Machining Centers

5 Results

Haas #TM-1, 30" X, 12" Y, 16" Z, 4000 RPM, #40, 7.5 HP, 47.5" x 10.5" table, rigid tap, coolant, 2007

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Haas
Model: TM-1
Year: 2007
Table Size 47.5" x 10.5" X-Axis Travel 30" Y-Axis Travel 12" Z-Axis ...more

Makino #S56, vertical machining center, 3-Axis, Pro 3, 35.4" X, 19.7" Y, 17.7" Z, 20 automatic tool changer, 20000 RPM, 2005

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Makino
Model: S56
Year: 2005
GENERAL.

Mazak #VTC-16A, Mazatrol M32 Control, 44" X, 16" Y, 20.8" Z, 7000 RPM, 24 automatic tool changer, Cat 40,1996

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Mazak
Model: VTC-16A
Year: 1996
GENERAL MANUFACTURER............. MAZAK. MODEL................ VTC-16A. SERIAL NUMBER............ 118222. AGE................. 1996. TABLE SIZE.............. 44.8" X 16.1". TRAVELS. ...more

Monarch #VMC-175, 30" X, 76" Y, 44" Z, 47" Z extended clearance, Fanuc 15M, thru spindle coolant, outriggers, new ballscrew 2018, 1994

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Monarch
Model: VMC-175
Year: 1994
GENERAL : MANUFACTURER.............. MONARCH MODEL................. VMC-175B TABLE SIZE............... 86" x 36"MAXIMUM TABLE LOAD........... 6,000 LBSSPINDLE NOSE TO ...more

Mori-Seiki #MV-65, 30 automatic tool changer, 50" X, 25.6" Y, 25.6" Z, MSC-516, pallet changer, 4000 RPM, 1996

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Mori-Seiki
Model: MV-65
Year: 1996
GENERAL.

25000 lb. Aronson #GE-250, power tilt/elevation/rotation, .07-66 RPM, 32.5" lift stroke

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Aronson
Model: GE-250

40000 lb. Ransome #400P, 84" x84" table, 135 Degrees tilt, counter clock wise, 480 V., s/n #51324, #9793

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Ransome
Model: 400P
GENERAL.

300000 lb. Aronson #3000P, welding positioner, 26' x26' table, pendant Control, 1973

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Aronson
Model: 3000P
Year: 1973
GENERAL :MAKE............. ARONSONMODEL............. 3000PAGE (APPROX)......... 1973CAPACITY........... 300,000 LBS.CENTER OF GRAVITY....... 12"CENTER OF GRAVITY....... 70" ABOVE TABLEROTATION TORQUE........ 3,600,000 ...more

Fromm AirPad #AP502, airpad machine, fully automated & computerized

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Fromm
Model: AP502