Victory Machinery Exchange
13855 W Polo Trail Dr
Lake Forest, IL 60045-5108
Lake Forest, IL 60045-5108
Platinum Level Dealer
Surplus Record Dealer Since 1957
Contact
About
Victory Machinery Exchange, the source for spring Coiling and wire Forming machinery, parts, and rebuilding services. Victory applies more than 50 years of experience and expertise by providing industry with high quality solutions for all your machine and parts requirements.Products & Services
- Grinders
- Wire Machinery
Associations & Affiliations
| Additional Contacts | Address | Phone |
|---|---|---|
| Neal Hoffenberg | Chicago, IL | 847-918-9797 |
151 listings in 39 categories
.15" DiAcro, 4 hand, 12" radius capacity, 1-1/2" height of standard forming nose, 1" center pin hole diameter, 40" operating leverage
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Bar, Pipe and Tube Benders
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Diacro
Catalog Specs : Radius Capacity: 12" Heght of Std. Forming Nose: 1 1/2" Built-up Nose available: ...more
9" DiAcro #2, hand bender, 9" radius capacity, 1/2" round mild steel bar, 3/8" square mild steel bar, 16 gauge steel tubing
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Bar, Pipe and Tube Benders
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Diacro
Model: 2
Catalog Specs : Radius Capacity: 9" Heght of Std. Forming Nose: 1" Built-up Nose available: ...more
Richards #5HDSB, bender
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Bar, Pipe and Tube Benders
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Richards
Model: 5HDSB
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
3/8" - 3/4" Grant #3TM, double end threader, 6"-32" long, 1967
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Bolt Threaders
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Grant
Model: 3TM
Year: 1967
Catalog Specs . . . Equipped With:. Equipped with:Capacity 3/8 -3/4 Diameter6” - 32” long . . . Location: Lake Forest.
C Frame Hydraulic Press Machines (Gap Frame)
1 Result
Denison Multipress #WR85L-C261, hydraulic press, 1979
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Denison
Model: WR85L-C261
Year: 1979
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
18" width x 18" H x 14" D Blue M #OV-500, box oven, 500 Degrees Fahrenheit, 250 Degrees Celsius
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Cabinet Type Ovens
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Blue M
Model: OV-500
Catalog Specs . . . Equipped With:. 500°F. 250°C18" x 18" x 14" deep. . . Location: Lake Forest.
18" width x 18" H x 18" D Blue M #OV-580C, box oven, 572 Degrees Fahrenheit, 19 amp, 240 V., with data recorder
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Cabinet Type Ovens
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Blue M
Model: OV-580C
Catalog Specs . . . Equipped With:. 572FInside Dimensions 18" x 18" x 18"19 Amp @ 240VWith Data recorder . . . Location: Lake Forest.
3" width x 2" H x 36 L Furnace Fixers #MKP-4T, conveyor oven, with clamshell scissors jack, 16-40" zones, 240 VAC
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Conveyor Belt Furnaces
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Furnace Fixers
Catalog Specs Oven Chamber Dimensions: Length: 36” Width: 3” Surface Area: 144 sq.in. Height: 2”Overall Dimensions: ...more
15.7" width x 3.5" H x 59" L Gasden-Ro #TBC-415, conveyor oven, turned up belt, 440 VAC
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Conveyor Belt Furnaces
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Gasden-Ro
Catalog Specs Effective Heat Area: WxHxL 15.75”x3.54”x59” Overall Dimensions: WxHxL 36.4”x49.6”-57.5”x110.2”Conveyor Height: 23.6”-31.5” ...more
33" width x 99" H Furnace Fixers #MKP-3, conveyor oven, 1 fan, 2100 watts, 450 Degrees -700 Degrees Fahrenheit
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Conveyor Belt Furnaces
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Furnace Fixers
Catalog Specs Oven Chamber Dimensions: Length: 33” Width: 3” Surface Area: 99 sq.in. Height: 1.5”Overall Dimensions: ...more
Furnace Fixers #MKP-6C, conveyor oven, serial #1507
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Conveyorized Ovens
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Furnace Fixers
Model: MKP-6C
Year: 1996
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
Furnace Fixers #MKP-10, conveyor oven, 59" length, 10" width, 3.5" height, 1 zone, 1 fan
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Conveyorized Ovens
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Furnace Fixers
Model: MKP-10
Year: 1996
Catalog Specs Oven Chamber Dimensions: Length: 59” Width: 10” Surface Area: 590 sq.in. Height: 3.5”Overall Dimensions: ...more
Gasden-Ro #TBE-315, conveyor oven
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Conveyorized Ovens
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Gasden-Ro
Model: TBE-315
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
HSI #HCF0260HS, conveyor oven, 11.8" conveyor width, 3.5" inlet height, 930 Degrees Fahrenheit, 1996
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Conveyorized Ovens
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Hsi
Model: HCF0260HS
Year: 1996
Catalog Specs Conveyor Width: 11.8” (300 mm)Inlet Height: 3.5” (90 ...more
17" x 40" Shen Jey #SJ-1740G, removable gap bed lathe, inch/metric threading, 3 & 4-jaw chuck, tailstock, face plate, steady rest
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Engine Lathes
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Shen Jey
Model: SJ-1740G
Catalog Specs 17” Swing x 40” Between CentersRemovable Gap Bed LatheEnglish and Metric Threading. . ...more
Clausing #Triumph-7.5, lathe
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Engine Lathes
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Clausing
Model: TRIUMPH-7.5
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
JFMT #Accra-Turn-18, lathe, 1995
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Engine Lathes
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Jfmt
Model: ACCRA-TURN-18
Year: 1995
Catalog Specs . . . Equipped With:. Equipped with:3 jaw, 4 jaw steady ...more
Wilson Rockwell #4JR, hardness tester, serial #1931
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Hardness Testers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Wilson Rockwell
Model: 4JR
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
High Speed and Automatic Presses
1 Result
Lourdes Systems Inc. #2100XAV, Hi-Speed impact press
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: High Speed and Automatic Presses
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Hi-Speed
Model: 2100XAV
Catalog Specs . . . Equipped With:. Equipped with:480 VoltsPlaten approx 12 x 16”. . . Location: Lake Forest.
Magnum #1MCB2A, hydraulic press, 10" capacity, automatic tie down, dual finger start, light curtain, 2005
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Hydraulic Presses
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Magnum
Model: 1MCB2A
Year: 2005
Catalog Specs . . . Equipped With:. Anti Tie Down Dual Finger StartLight CurtainRotary Indexing Table. . . Location: Lake Forest.
Famco #8, #10, #12 & #15 Kick Presses
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Kick Presses
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Famco
Model: 8
Famco #8, kick press, 4" throat, 2-1/2" stroke, 13-1/2" x 15-1/2" table, 5-1/2" ram to base, 11/16" bore in ram
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Kick Presses
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Famco
Model: 8
Catalog Specs Depth of Throat : 4" Distance Ram To Base: 5 1/2" Maximum Stroke: 2 1/2" Dia. ...more
Material Handling Equipment
2 Results
Parts Counter Turntable, Accra Wire #P-32, 32" table diameter, 1999
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Material Handling Equipment
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Accra Wire
Model: P-32
Year: 1999
Catalog Specs Table Diameter: 32”Index: Time or Piece Count. . . Equipped With:. . . . Location: Lake Forest.
Tilt Table, Vestil #EM1-500-4848-4, 4000 lb. capacity
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Material Handling Equipment
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Vestil
Model: EM1-500-4848-4
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
11" Nikon comparator, extra lenses, 5, 10, 20, 50, Surace Illumination
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Optical Comparators
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Nikon
Catalog Specs . . . Equipped With:. Extra Lenses 5,10,20,50 Surface illumination11”. . . Location: Lake Forest.
12" MicroVu #500HP comparator, 10x lens
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Optical Comparators
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Microvu
Model: 500HP
Catalog Specs . . . Equipped With:. 12” Screen10X LensManualX Travel (Horizontal) 6”Y Travel (Vertical) 2”Focus 1”. . . Location: Lake Forest.
14" Scherr-Tumico #22-1500, comparator, 6" x 16" table work surface, 3-3/4" x 7-3/4" table glass, 5" table travel
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Optical Comparators
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Scherr-Tumico
Model: 22-1500
Catalog Specs Screen Diameter: 14" Work Surface of Table: 6" x 16" Table Glass: 3 3/4" x ...more
Mitutoyo #PJ-250, comparator
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Optical Comparators
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Mitutoyo
Model: PJ-250
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
15000 lb. Accra Wire #D-100F, pallet decoiler
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Pallet Decoilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Accra Wire
Model: D-100F
Catalog Specs Capacity: 15,000 lbs. Speed: 0-11 rpms Table Size: 80" OD Wire Size: .050" -.500" ...more
Power Squaring Shears (Gauge)
1 Result
10 gauge x 10' Wysong #1010, shear
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Power Squaring Shears (Gauge)
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Wysong
Model: 1010
Catalog Specs . . . Equipped With:. 10’10 gaManual Back Gages. . . Location: Lake Forest.
Rotary Screw Air Compressors (Positive Displacement)
1 Result
Ingersoll-Rand #2545D10, air compressor
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Ingersoll-Rand
Model: 2545D10
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
Single Crank OBI Flywheel Press Machines
3 Results
27 Ton, L & J #W-27, OBI punch press, 2" stroke, 3" adj., 11-1/2" Shut Height, air clutch, 1968
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: L & J
Model: W-27
Year: 1968
Catalog Specs . . . Equipped With:. Air Clutch27 Ton2” Stroke 3” Adj. ...more
55 Ton, Walsh #55, OBI punch press, 2.5" stroke, variable speed drive, air counter balance
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Walsh
Model: 55
Catalog Specs . . . Equipped With:. 55 Ton2.5” StrokeVariable Speed DriveAir Counterbalance. . . Location: Lake Forest.
Federal #F3-32T, OBI punch press, serial #Mar-66
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Federal
Model: F3-32T
Catalog Specs . . . Equipped With:. 32 Ton Capacity2.5” StrokeAir operated mechanical clutch. . . Location: Lake Forest.
Sleeper & Hartley No. 3-349 S & H, looper, .135"-.250" cap., 3/4" to 2" OD, 1 HP, 1957
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Spring Loop Wires
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Sleeper & Hartley
Model: 3-349
Year: 1957
Catalog Specs Wire Range: Minimum - .135" Maximum - .250"Coil Range O.D.: ...more
Sleeper & Hartley No. 4-322 S & H, looper, .192"-.500" cap., 1-3/4" to 3" OD, 2 HP, 1969
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Spring Loop Wires
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Sleeper & Hartley
Model: 4-322
Year: 1969
Catalog Specs Wire Range: Minimum - .192" ...more
Carlson #CET-3, spring tester, serial #3-963S
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Spring Testers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Carlson #cet-3
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
Link #EL-0, spring tester, 5 lb. capacity, serial #WS 852050
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Spring Testers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Link #el-0
Catalog Specs . . . Equipped With:. 5 lb. . . Location: Lake Forest.
Tank Mounted Air Compressors
1 Result
25 HP Quincy #QST25ACA31N, air compressor, tank mounted, 87-115 cfm, 100-150 psi, w/Pneumatech AD-400 air dryer, 480 hours
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Tank Mounted Air Compressors
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Quincy
Model: QST25ACA31N
Catalog Specs CFM @ 100 psi 115 cfm 125 psi 105 cfm 150 psi ...more
Torque and Torsion Testers
1 Result
1000 lb. Carlson #HTT-1000, torsion tester, deflection: 1 Degrees -2000 Degrees then 1 Degrees -20000 Degrees (DRO) Torque: .1 to 1000.0 inch lb. 1 to 16000 inch oz., spring length: 0-12"
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Torque and Torsion Testers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Carlson
Model: HTT-1000
Catalog Specs Deflection: 1°-2,000° then 1°-20,000° (DRO)Torque: .1 to 1000.0 inch lb. ...more
Gardner #186-36" tub grinder, 36" x7/8" steel disc wheel, 3-1/4" spindle diameter, 585 RPM, 7.5-15 HP
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Tub Grinders
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Gardner
Model: 186-36
Catalog Specs Steel Disc Wheel: 36” x 7/8”Spindle Diameter: 3 1/4”Spindle RPM: 585 to give 5500-6000 peripheral ...more
Vacuum Formers and Thermoformers
1 Result
Visual #M-2, thermoforming machine
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Vacuum Formers and Thermoformers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Visual
Model: M-2
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
Vertical Double End Opposed Grinders
6 Results
Bennett #SG2-10, Spring Grinder
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Vertical Double End Opposed Grinders
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Bennett
Model: SG2-10
Catalog Specs . . . Equipped With:. Equipped with:No Factory Specs AvailableAll New: ...more
Besly #902-12", 905-18", spring grinder
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Vertical Double End Opposed Grinders
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Besly
Model: 902-12
Besly #918-30T D.E., vertical spindle tandem grinder, 80" wheel diameter, 30" abrasive disc diameter, 3" abrasive thickness, 25 HP
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Vertical Double End Opposed Grinders
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Besly
Model: 918-30T
Catalog Specs Catalog Specs: Spindle Drive Motor Max. HP - 25 Fixture Drive Motor Max. HP - ...more
Besly #926-53T D.E., vertical spindle tandem grinder, 53" grinding wheels, 2 dressers, motorized elevation, 4 heads
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Vertical Double End Opposed Grinders
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Besly
Model: 926-53T
Catalog Specs Abrasive Wheel Diameter: 53”Max Opening Between Wheels: 8”Feed Wheel Diameter: ...more
Hack #FSA2, vertical spindle grinder, 9" grinding stones, approx (22) 9.5" feed plates, dresser
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Vertical Double End Opposed Grinders
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Hack
Model: FSA2
Catalog Specs . . . Equipped With:. Equipped with:9” Grinding StonesApproximately 22 9.5” Feed PlatesDresser. . . Location: Lake Forest.
Simco #H-300-2, vertical spring grinder, dresser, Sheng Yann ventilator dust collector, 2000
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Vertical Double End Opposed Grinders
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Simco
Model: H-300-2
Year: 2000
Catalog Specs Model SEG-300-2C Wire Capacity 0.031 – 0.098” (0.8 – 2.5 mm) Max. Spring OD 1.378” (35 ...more
Besley #910, vertical spindle grinder, 23" grinding stones, 48" feed table, 10 HP, 1958
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Vertical Spindle
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Besley
Model: 910
Year: 1958
Catalog Specs . . . Equipped With:. Equipped with:23” Grinding Stones48” Feed Table10 ...more
Catch and Count C2000 batch counter, 6 Stainless Steel bins
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire - Miscellaneous
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Catch & Count
Catalog Specs . . . Equipped With:. 6 SS Bins. . . Location: Lake Forest.
Fortuna Federn #WIM-14, CNC lathe coiler, 5-14mm wire diameter, Vector drives, 2000
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire - Miscellaneous
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Fortuna
Year: 2000
Catalog Specs Catalog Specs.Wire Diameter: 5-14 mm (DIN 17223 cl.C)Wire Diameter: 18 mm Soft WireMaximum Spring ...more
1/4" Lubow #ML-6 Table Bender Air
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Benders
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Lubow
Model: ML-6
Catalog Specs Capacity 3 Pieces 5/16" Wire 2 Pieces 3/8" Wire Rotation 400 Degrees Rotating ...more
Acme chamferring machine, .500"-1.125" spring diameter, 1"-3" spring length, up to .125" wire diameter
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Chamfering Machines
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Acme
Catalog Specs Max CapacitySpring Diameter .500” - 1.125” Spring Length 1” - 3” Wire Diameter Up To .125”. ...more
Carlson #SC-2, hand coiler, .041"-156" wire diameter,. 2" length, 8" pitch
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Model: SC-2
Catalog Specs Wire Diameter: .041" to .156"Coil O.D.: Up to 2"Lengths: Up to 8"Pitch: Up to 1"Total Coils: ...more
Haardmaster, Solarman Eng Project (Carlson) SSC-4 (SC-1, SC-2?) hand coiler, 3-1/4" chuck, 2007
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Haardmaster
Year: 2007
Catalog Specs . . . Equipped With:. Equipped with:3-1/4” Chuck. . . Location: Lake Forest.
Sleeper & Hartley #1/2-790 Optimum feed coiler, .008"-.042" wire range, 28.5" wire feed, 60-600 SPM
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Sleeper & Hartley
Model: 1/2-790
Catalog Specs Wire Range: .008" to .042"Max. Wire Feed: 28.5"Max. Coil Diameter: ...more
Baird #4-30, 4-slide, 1/4" max wire diameter, 1-1/4" width, 30" max feed length, 50 RPM, 20" x 11-1/2" opening in bed
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Baird
Model: 4-30
Catalog Specs Maximum Wire Diameter..............1/4" Standard Width Coil Stock.............1 1/4" Roll Straightener Size................No. 5 Maximum Feed Length...............30" (32 ...more
Baird #APR-36, 4-slide, 1/4" wire diameter, 1-1/4" standard width coil stock, #5 roll straightener size, 36"max feed length, 20-60 RPM
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Baird
Model: 4-36
Catalog Specs Maximum Wire Diameter..............1/4" Standard Width Coil Stock.............1 1/4" Roll Straightener Size................No. 5 Maximum Feed Length...............36" (36" ...more
Baird #4-36, 4-slide, 1/4" wire diameter, 36" feed length, 20-60 RPM, mechanical clutch, air brake, split cams, 2 plane straightener
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Baird
Model: 4-36
Catalog Specs Maximum Wire Diameter..............1/4" Standard Width Coil Stock.............1 1/4" Roll Straightener Size................No. 5 Maximum Feed Length...............36" (36" ...more
Baird #8, 4-slide,.500" cap., air clutch/brake, form stripper w/flat face Kingpost, 7.5 HP
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Baird
Model: 8
Catalog Specs Max. Wire Diameter Mild Steel: 1/2"Standard Width Ribbon Metal: 1 1/2"Roll Straightener: ...more
Baird #RWI-1, 4-slide, 3/32" max wire diameter, 1-1/2" width, 8-1/2" max feed length, 70-300 RPM, 5-1/2" x 4-1/4" opening in bed
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Baird
Model: RWI-1
Catalog Specs Maximum Wire Diameter 3/32" (.093") Standard Width Coil Stock 1 1/2" Roll Straightener Size ...more
Bihler #Mach-1, wire former, 5 slides, Bihler pay off MH-2, air clutch, press slide, 480 VAC, 1980
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Bihler
Model: MACH-1
Year: 1980
Catalog Specs Drive Rating: 4KWNormal Press Capacity: 7 MP 70 kNNormal Force of Bearing Unit: 3 MP ...more
Bihler #RM-30, wire former, 400 PPM, 10.629" feed length, 1.574" strip width
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Bihler
Model: RM-30
Catalog Specs Press Capacity: 5 TonsBending Power per slide: 4 TonsProduction: ...more
Bihler #RM-35, wire former, 250 PPM, 6.693" feed length, 1.968" strip width
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Bihler
Model: RM-35
Catalog Specs Press Capacity: 7 TonsBending Power per slide: 5 TonsProduction: ...more
Bihler #RM-40, wire former, 9 ton capacity, 2.36" strip width, 10.62" feed length, 350 PPM, 1994
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Bihler
Model: RM-40
Year: 1994
Catalog Specs Press Capacity: 9 TonsBending Power per slide: 6 TonsProduction: ...more
Nilson #700, 4 slide, 1/32" max dia.wire, 3/8" max width strip metal, 3" feed length, 1975
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Nilson
Model: 700
Year: 1975
Catalog Specs Maximum Diameter Basic Wire.....1/32" (.031") Maximum Width Strip Metal.......3/8" (.375") Standard Feed Length.................3" Standard Slide Strokes ...more
Nilson #S5, 4-slide, stripper & lifter
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Nilson
Model: S-5
Catalog Specs Maximum Diameter Basic Wire 3/8" (.375) Maximum Width Strip Metal 2 3/8" Standard ...more
Nilson #S0F, 4-slide, 1/16" max wire diameter, 1" max width, 6" feed length, 1.5 HP vari-speed, 60-204 SPM, 5" x 4-3/4" opening in bed
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Nilson
Model: S0F
Catalog Specs Maximum Diameter Basic Wire .....1/16"(.062")Maximum Width Strip Metal.............1"Standard Feed Length ................6"Standard Slide Strokes Front...............5/8" Sides..............1 1/2" ...more
Nilson #S1, wire former, 4-slide, solid cams, 2 plane (2 available)
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Nilson
Model: S1
Nilson #S1F, 4-slide, 3/32" max wire diameter, 1-1/4" max width, 8" feed length, 1.5 HP vari-speed, 50-200 SPM, 6" x 5" opening in bed
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Nilson
Model: S1F
Catalog Specs Maximum Diameter Basic Wire 3/32" (.093")Maximum Width Strip Metal. 1 1/4" Feed Length 8" ...more
Nilson #S2F, 4-slide, solid cams, form stripper
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Nilson
Model: S2F
Catalog Specs Maximum Diameter Basic Wire .....1/8" (.125") Maximum Width Strip Metal..........1 1/2" Standard Feed Length ...............10" Standard ...more
Nilson #S3, 4-Slide, Shell Cams, 1981
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Nilson
Model: S3
Year: 1981
Catalog Specs Maximum Diameter Basic Wire 3/16" (.187") Maximum Width Strip Metal. 1 5/8" Standard ...more
Nilson #S3F, 4-slide, 3/16" wire diameter, 15" feed length, 3 HP, 32-130 SPM, air clutch, lube system, buckle probe
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Nilson
Model: S3F
Catalog Specs Maximum Diameter Basic Wire ......3/16" (.187")Maximum Width Strip Metal...............2"Standard Feed Length .................15"Standard Slide Strokes Front................1 3/4" ...more
Nilson #S3F, 4-slide, 3/16" max.diameter, 2" strip width, 15" standard feed length, 3 HP, 32-130 SPM, press attachment, 230 VAC
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Nilson
Model: S3F
Catalog Specs Maximum Diameter Basic Wire ......3/16" (.187")Maximum Width Strip Metal...............2"Standard Feed Length .................15"Standard Slide Strokes Front................1 3/4" ...more
Torrington #V80 Verti-slide, .062" max wire diameter, .032" max thickness, .750" max width, 100-500 SPM
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: V80
Catalog Specs Maximum Strip Thickness: .032" Maximum Srtip Width: ...more
Torrington #V82 Verti-Slide, .062" x 2.5", air clutch & brake, straightener, vari-speed drive, 1981
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: V82
Year: 1981
Catalog Specs Maximum Strip Thickness: .062" Maximum Srtip Width: 2.5" Maximum Wire Diameter: .207" Wire Line Height: ...more
U.S. Baird #8, 4-slide
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: U.S. Baird
Model: -8
Catalog Specs Max. Wire Diameter Mild Steel: 1/2"Standard Width Ribbon Metal: 1 1/2"Roll Straightener: ...more
U.S. Baird (Asahi NF-2) #28 Multislide, air clutch, 8" max feed length, 2 HP variable speed
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: U.S. Baird
Model: -28 MULTISLID
Catalog Specs Maximum Length of Feed - 8" Maximum Width of Sock - 1 1/2" Maximum Thickness of ...more
U.S. Baird #104 Multislide, nice selection of tooling, excellent
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: U.S. Baird
Model: -104 MULTISLID
Catalog Specs Maximum Thickness of Stock: 1/32" Maximum Width of Stock: 7/8" Maximum Length of Feed: 4 ...more
U.S. Baird #10000, 4-slide
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: U.S. Baird
Model: 10000
Catalog Specs Maximum Wire Diameter: .040" Standard Width Coil Stock: 7/16" Roll ...more
E.N. #EN-502E, CNC wire former,.024"-.080" wire diameter, 60 PPM, 394 FPM, upgraded control system
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: E.n.
Model: EN-502E
Catalog Specs Wire Diameter: .024"-.080" Maximum Spring Diameter: 2.4" Maximum Spring Length: ...more
Herdon #CSM-30T, CNC wire former
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Herdon
Model: CSM-30T
Catalog Specs Forming Capacity: Wire Diameter: 1.0 mm - 3.8 mm Avg. O.D.: 45 ...more
![Image for Itaya #MCS-8D, CNC wire former, .032" wire diameter, .280" spring diameter, 1.80" spring length, 4 T-slides, 1 C-slide, 1 S-slide, 1984]](https://files.surplusrecord.com/cdn-cgi/image/width=160/listphotos/095042.jpeg)
Itaya #MCS-8D, CNC wire former, .032" wire diameter, .280" spring diameter, 1.80" spring length, 4 T-slides, 1 C-slide, 1 S-slide, 1984]
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Itaya
Model: MCS-8D
Catalog Specs Maximum Wire Diameter: .032”Maximum Spring Diameter: .280" Maximum Spring Length: 1.80" Camshaft Characteristics: ...more
Itaya #MCS-8E, CNC wire former, 032" wire diameter, .280" spring diameter, 1.80" spring length, 125 RPM
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Itaya
Model: MCS-8E
Catalog Specs Maximum Wire Diameter: .032" Maximum Spring Diameter: .280" Maximum Spring Length: 1.80" Camshaft Characteristics: ...more
Itaya #MCS-8E, CNC wire former, .032" wire diameter,.280" spring diameter, 1.80" spring length, 2400 IPM
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Itaya
Model: MCS-8E
Catalog Specs Maximum Wire Diameter: .032" Maximum Spring Diameter: .280" Maximum Spring Length: 1.80" Camshaft Characteristics: ...more
Itaya #MCS-15E, CNC wire former
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Itaya
Model: MCS-15E
Catalog Specs Maximum Wire Diameter: .060" Maximum Spring Diameter: .480" Maximum Spring Length: 3.20" Camshaft Characteristics: Min. ...more
Itaya #MCS-15E, CNC wire former, .060" wire diameter, .480" spring diameter, 3.20" spring length, 2400 IPM
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Itaya
Model: MCS-15E
Catalog Specs Maximum Wire Diameter: .060" Maximum Spring Diameter: .480" Maximum Spring Length: 3.20" Camshaft Characteristics: Min. ...more
Itaya #MCS-30G, CNC wire former, 300 capacity, pneumatic swing arm, rotary quill, servo spinner, 1998
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Itaya
Model: MCS-30G
Year: 1998
Catalog Specs Wire Diameter: .059" (1.5mm) - .118” (3.0mm) Maximum Spring Diameter: .944" (24mm) ...more
New Form Tech #MF-20, CNC wire former, rotary wire, spinner, rotary quill, 8 slides, 2 tool holders, transformer, 2003
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Formers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: New Form Tech
Model: MF-20
Year: 2003
Catalog Specs . . . Equipped With:. - Rotary Wire -Spinner -Rotary Quill- 8 Slides - 2 Tool Holders-Tranformer . . . Location: Lake Forest.
Accra Wire #D-17RA, payoff reel, serial #D17RA0507991, 1999
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Payoffs
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Accra Wire
Model: D-17RA
Year: 1999
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
Accra Wire #D-19, payoff reel, 300 lb. capacity, 26" OD table, .010"-.050" wire, 0-110 RPM
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Payoffs
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Accra Wire
Model: D-19
Catalog Specs Capacity: 300 lbs. Speed: 0-110 rpmsTable Size: 26" OD Wire Size: .010" -.050" Voltage: ...more
Accra Wire #D-25, payoff reel, 1200 lb. capacity, 0-80 RPM, 32" OD x 14" W table, 2002
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Payoffs
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Accra Wire
Model: D-25
Year: 2002
Catalog Specs Capacity: 1,200 lbs.Speed: 0- 80rpmsTable Size: 32" OD x 14" W Wire Size: .010" ...more
Nilson #51k, tilting payoff reel
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Payoffs
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Nilson
Model: 51K
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
Pennsylvania Industries #SRA-1200, payoff reel, .028" capacity
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Payoffs
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Pennsylvania
Model: SRA-1200
Catalog Specs . . . Equipped With:. 10” Wide, 24” max id 12” min ID, 48” OD Brake only. . . Location: Lake Forest.
Torrington #W59B, payoff reel, 100 lb. max., 6"-26" OD coil diameter, 300 FPM
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Payoffs
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W59B
Catalog Specs Coil Diameter: Max. OD 26” Min. ID 6”Weight: Max. 100 ...more
Straus-Artys #SAC-1, ring coiler, .047"-.250" wire diameter, 2-3/4"-40" ring diameter, 70-140 FPM, automatic de-winder
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Ring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Straus-Artys
Model: SAC-1
Catalog Specs Wire Diameter: .047" to .250" Ring Diameter: 2 3/4" to 40" Production: 70 ...more
Sleeper & Hartley No. 00-7900 S & H Optimum coiler, .005"-.021" wire, 17.5" wire feed, 1/2" coil diameter, 80-800 SPM, feed rolls, wire guides, 1984
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Sleeper & Hartley
Model: 007900
Year: 1984
Catalog Specs Wire Range: .005" to .021" Max. Wire Feed: ...more
Sleeper & Hartley No. 1/2-790HS S & H, Optimum feed coiler, .015"-.042" wire range, 28.5" wire feed, 1" coil diameter, 700 SPM
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Sleeper & Hartley
Model: 1/2790HS
Catalog Specs Wire Range: .015" to .042"Max. Wire Feed: 28.5"Max. Coil Diameter: 1"Production: Up to 700 spmFloor Space: ...more
No. 1 Samuel, Popcorn coiler, (4) to choose from
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Samuel
Model: 1
No. 1-1/4 Samuel, Popcorn coiler
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Samuel
Model: 11/4
No. 1-1/2 Samuel Popcorn coiler, .035"-.105" wire diameter, 5000-12000 springs per hour, single pitch, updated electrical, 2001
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Samuel
Model: 11/2
Year: 2001
Catalog Specs Wire Diameter: Minimum .035" Maximum .105"Coil I.D.: Minimum 1/8" ...more
No. D-7E Itaya, segment coiler
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Itaya
Model: D7E
Catalog Specs . . . Equipped With:. . . . Location: National.
No. 8HS HTC Segment coiler, 1989
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Htc
Model: 8HS
Year: 1989
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
No. 8HS HTC, spring coiler, .020" capacity, 1984
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Htc
Model: 8HS
Year: 1984
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
No. 8HS/M HTC, spring coiler
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Htc
Model: 8HS/M
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
No. SC8 MEC, spring coiler, .004" - .031", 1994
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Mec
Model: SC8
Year: 1994
Catalog Specs Wire Diameter 0.1mm to 0.8mmCoil Outer Diameter Max 20 mmFeed Length with 2-Cycle Change Gears Max. ...more
No. W10A Torrington, segment coiler,.008"-.028" wire diameter, 24-240 springs per miunte, 300 FPM, feed rolls, wire guides, 1974
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W10A
Year: 1974
Catalog Specs Wire Diameter: Minimum - .008" Maximum - .028"Wire Length: Up ...more
No. W11A Torrington, segment coiler,.015"-.072" wire diameter, 20-200 springs per minute, feed rolls, wire guides, single pitch, 1977
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W11A
Year: 1977
Catalog Specs Wire Diameter: Minimum - .015" ...more
No. W12A Torrington, Torsion & Multi-Feed
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W12A
Catalog Specs Wire Diameter Minimum - .047" Maximum - .148"Wire Length: Up ...more
No. W13A Torrington, segment coiler, .125"-.313" wire diameter, 13-82 springs/minute, new feed rolls, new wire guides
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W13A
Catalog Specs Wire Diameter: Minimum - .125" ...more
No. W13A Torrington, segment coiler,.125"-.313" wire diameter, 20 HP, 200 FPM, feed rolls, 1980
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W13A
Year: 1980
Catalog Specs Wire Diameter: Minimum - .125" ...more
No. TF-20 MEC, spring coiler,.023"-.078" wire diameter, 10-200 pieces per minute, left & right hand coiling, double pitch, 1980
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Mec
Model: TF20
Year: 1980
Catalog Specs Wire Diameter .6 - 2.0 mm (.023” - .078”)Coil Diameter Max 40 mm (1.57”)Feed ...more
No. W22 Torrington, Single Diameter & Pitch
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W22
No. W25 Torrington, spring coiler, .750 capacity, tooling, CAMS & gears
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W25
Catalog Specs Wire Diameter: Minimum - .250" Maximum - .750"Wire Feed: ...more
No. W100A Torrington, segment coiler,.003"-.015" wire diameter, 20-400 springs per minute, 300 FPM, feed rolls, single pitch, 1975
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W100A
Year: 1975
Catalog Specs Wire Diameter: Minimum - .003" Maximum - .015"Wire Length: Up To ...more
No. W125S Torrington, Double Diameter, Single Pitch, Power Head
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W125S
Catalog Specs Wire Diameter Minimum - .105" Maximum - .250"Wire Length: Up To ...more
No. W125SA Torrington, double diameter, single pitch, multiple feed, power head
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W125SA
Catalog Specs Wire Diameter Minimum - .105" Maximum - .250"Wire Length: Up To ...more
No. W420 Torrington cam coiler, .062"-.162" wire diameter, 300 FPM, feed rolls, wire guides, chuck double diameter, double pitch, 1988
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W420
Year: 1988
Catalog Specs Wire Diameter: .062” to .162”Coil OD Max.: 2.750”Coil OD Min: ...more
AIM #1000-5, CNC spring coiler,.080" cap., feed rolls, wire guides, tool holders, 1966
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Aim
Model: 1000-5
Year: 1966
Catalog Specs Catalog Specs:Wire Feed Speed: 75”/secMaximum Wire Size: .080”Minimum Wire Size: .026”Feed Length: UnlimitedCoil ...more
BHS Torin #CNC-11-3, Spring Coiler, .080" wire capacity, 4-Axis, built-in Moyer Gage
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Bhs
Model: CNC-11-3
Catalog Specs Wire Diameter: Minimum - .015" (Standard Coiling) ...more
BHS Torin #CNC-100, CNC spring coiler, 3-Axis servo Control, left hand, .003"-.015" wire diameter, unlimited wire length, 400 FPM, 1994
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Bhs Torin
Model: CNC-100
Year: 1994
Catalog Specs Wire Diameter: Minimum - .003" Maximum - .015"Wire Length: UnlimitedCoil O.D.: ...more
BHS Torin #CNC-810, spring coiler, 3-Axis CNC controls, hydraulic cut-off, mechanical feed roll, 1993
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Bhs Torin
Model: CNC-810
Year: 1993
Catalog Specs Wire Diameter: Minimum - .010" (Standard Coiling) ...more
Itaya #PC-15, CNC spring coiler, 1.5mm capacity, spring gage, sorting chute, single plane straightener, 1991
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Itaya
Model: PC-15
Year: 1991
Catalog Specs Forming Capacity: Wire Diameter: .011" - .059" (.3-1.5 mm) ...more
Sleeper & Hartley #Micro-Coiler, CNC spring coiler, 4 servos 3-Axis, air operated cut-off, 2005
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Sleeper & Hartley
Model: MICRO-COILER
Year: 2005
Catalog Specs . . . Equipped With:. 4 Servos3 Axis - Feed Diameter ...more
Torrington #CNC-810, CNC spring coiler
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: CNC-810
Catalog Specs Wire Diameter: Minimum - .010" (Standard Coiling) ...more
Torrington #W10A, CNC spring coiler retrofit, .008"-.028" wire diameter, 24-240 springer per minute, 300 FPM
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W10A
Catalog Specs Wire Diameter: Minimum - .008" Maximum - .028"Wire Length: Up ...more
Torrington #W11A, CNC spring coiler retrofit, .015"-.072" wire diameter, 300 FPM, 20-200 springs per minute
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W11A
Catalog Specs Wire Diameter: Minimum - .015" ...more
Wafios #FUL-22, CNC spring coiler, 1997
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Wafios
Model: FUL-22
Year: 1997
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
Wafios #FUL-41, CNC spring coiler
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Coilers CNC
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Wafios
Model: FUL-41
Catalog Specs . . . Equipped With:. . . . Location: National.
Carlson #CLT-25, spring tester, 25 lb. capacity
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Testers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Model: CLT-25
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
Carlson #TT-1A, torsion tester, .010"-3/16" wire diameters, 8" spring lengths & diameters
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Testers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Model: CARLSON
Catalog Specs Capacity: For Testing Torsion Springs with Wire Diameters from .010” to 3/16”Spring Lengths and Diameters up ...more
Fuji-Seiki #USA-100, spring tester, 100 lb. capacity
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Testers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Model: USA-100
Catalog Specs . . . Equipped With:. Capacity 100 lbs. . . Location: Lake Forest.
Larson #UT-36-1000, spring tester, 20" capacity, serial #4825282 062695
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Testers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Larson
Model: UT-36-1000
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
Link-Belt #EL-4, digital spring tester, 100 lb. capacity, 6" travel, 12" max opening
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Testers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Link-Belt
Model: EL-4
Catalog Specs . . . Equipped With:. 100.00 lb. Capacity6" travel. max opening ...more
Reicherter #R80-DU, spring tester with weights extension & compression, 200 lb. capacity, manual
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Testers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Model: R80-DU
Catalog Specs . . . Equipped With:. Equipped with:WeightsExtension and Compression200 lb capacityManual. . . Location: Lake Forest.
Sterling #DW780A Spring Tester
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Spring Testers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Sterling
Model: DW780A
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
Wire Straighteners and Cut Off
9 Results
.02" -.080" Shuster #ASCV-1, straight & cut, short cut, 78-380 PPM, 2 pair feed rolls, motorized de-reeler, 1975
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Straighteners and Cut Off
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Shuster
Model: ASCV-1
Year: 1975
Catalog Specs Capacity: .020" to .080" Basic WireProduction: 78 to 380 ppmMaximum Length: 3"Minumum Length: 1-1/2 x Diameter ...more
.062" -.250" Shuster #1AVS5, straight & cut, 50-200 FPM, 5 HP, 1994
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Straighteners and Cut Off
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Shuster
Model: 1AVS5
Year: 1994
Catalog Specs Wire Diameter Minimum: .062" Basic WireMaximum: .250" Basic Wire Geared To ...more
1/16" -1/8" Lewis #1C, straight & cut, 100 PPM, 1-1/2 HP, 1800 RPM, 36" cutoff, 1960
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Straighteners and Cut Off
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Lewis
Model: 1C
Year: 1960
Catalog Specs Capacity: 1/16” - 1/8” Basic Steel (3/32 high carbon)Feed Speeds:Pieces Per Minute: approx. 100 ppm ...more
3/32" -1/4" Lewis #2C, 8' max.cut-off
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Straighteners and Cut Off
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Lewis
Model: 2C
Catalog Specs Capacity: 3/32" - 1/4" Feed Speeds: Pieces Per Minute:Height to Center of Wire: 34"Height ...more
.125" -.312" Shuster #2A4V, straight & cut, 20-200 FPM, 15 HP, 1979
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Straighteners and Cut Off
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Shuster
Model: 2A4V
Year: 1979
Catalog Specs Capacity: .125" ...more
3/8" x 5' Wells #6N, straightener & cut-off
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Straighteners and Cut Off
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Wells
Model: 6N
5/8" Lewis #10F, travel cut, 12' cut-off, tooling
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Straighteners and Cut Off
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Lewis
Model: 10F
Catalog Specs Capacity: 3/8" - 5/8" Feed Speeds: ? fpm Height to Center of Wire: ...more
Shuster #16SFT, rotary straightener, 1/2 HP
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Straighteners and Cut Off
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Shuster
Model: 16SFT
Catalog Specs Capacity: High Tensile: .015" - .062" Mild Steel: .020" - 072" Speed Ranges: 10-90 or ...more
Shuster #18SFT, rotary straightener, 3/4 HP
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Straighteners and Cut Off
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Shuster
Model: 18SFT
Catalog Specs Capacity: High Tensile: .030" - .080" Mild Steel: .040" - 135" Speed Ranges: 10-90 or ...more
Wire Torsion Spring Coilers
5 Results
No. 1-731A Sleeper & Hartley torsion, vari.freg.drive, 2 slides
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Torsion Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Sleeper & Hartley
Model: 1-731A
Sleeper & Hartley No. 1-1/2-698 S & H, torsion coiler,.035"-.120" wire diameter, 8-40 springs/minute, 5 HP vari-speed drive, 2 slide, 1964
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Torsion Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Sleeper & Hartley
Model: 1-1/2-698
Year: 1964
Catalog Specs Minimum Wire Diameter: .035" Maximum Wire Diameter: .120" Wire Feed: 12 1/2" Maximum Length ...more
Sleeper & Hartley No. 2-1/2-604 S & H, torsion coiler,.105"-.250" wire range, 10-30 springs/min, air feed
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Torsion Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Sleeper & Hartley
Model: 2-1/2-604
Catalog Specs Wire Range: .105" to .250" Maximum # of Turns ...more
Sleeper & Hartley No. 3-323 S & H, torsion coiler, .135"-.375" wire range, 8-24 springs per minute, horizontal slide (cutoff)
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Torsion Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Sleeper & Hartley
Model: 3-323
Catalog Specs Wire Range: .135" to .375" Maximum # of Turns per Coil: .135" - ...more
No. W3001 Torrington, torsion, .030"-.080" wire diameter, vertical 2 slide, 3 horizontal slides, standard slide feed, 1979
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wire Torsion Spring Coilers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: W3001
Year: 1979
Catalog Specs Wire Diameter: Maximum - .080" Minimum - .030"Rated Capacity: 10 ...more
Wrapping Machines (Wrappers)
1 Result
Robopac #Compacta-400, stretch wrap, 8" x 8", 2001
Victory Machinery Exchange | Lake Forest, IL | Neal Hoffenberg |
Category: Wrapping Machines (Wrappers)
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Robopac
Model: COMPACTA-400
Year: 2001
Catalog Specs . . . Equipped With:. . . . Location: Lake Forest.
