
T & S Tool & Supply Co Inc
Contact
About
T&S Tool & Supply is a full-line industrial distributor selling not only new machinery, but used equipment as well! We also sell inspection tools, tool holders, indexable tools, tool boxes, drill chucks, reamers, taps, drills, endmills, and much, much more!Representing over 500 companies like Clausing, Acer, Dake, Jet, Norton, Roll-In, Emax, Starrett, Mitutoya, Brown & Sharpe, OSG, YG-1, Guhring, Newall, Jacobs, Techniks, Lyndex, Kurt, Dormer, Bison, Pratt-Burnerd, Kennedy, Sowa, Kyocera, Ingersoll, Vardex and many others. Stop it and shop our large retail showroom the next time you are in the Toledo Area & make sure you ask for a copy of our T&S 450 page catalog! Or shop our fully interactive website that takes all the major credit cards & Paypal that includes automated freight processing.
53 listings in 26 categories
1/2" -2" Greenlee #1818, mechanical conduit bender includes 3 cast shoes, portable on wheels, built-in rachet
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Bar, Pipe and Tube Benders
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Greenlee
Model: 1818
This is a USED Greenlee 1818 Mechanical Bender and includes 3 cast shoes with the radius capacity listed on each shoe! First shoe is 2-sided and lists 1-1/4 to 7-3/8 on one side, then 1-1/2 ...more
Bed and Knee Milling Machines - Vertical
6 Results
Bridgeport #Series-I, vari-speed vertical milling machine, 9" x48" table, 2 HP, chrome ways, digital read out, 1981
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Bridgeport
Model: SERIES-I
Year: 1981
This is a USED Bridgeport 60-4200 RPM Variable Speed Milling Machine. It has a 9"x48" table with chrome ways, R-8 spindle with 12" of cross travel, 36" of longitudinal travel. Then it has a ...more
Bridgeport #Series-I, vari-speed milling machine, 9" x48" table, 2 HP, chrome ways, digital read out
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Bridgeport
Model: SERIES-I
This is a USED Bridgeport 60-4200 RPM Variable Speed Milling Machine. It has a 9"x48" table with chrome ways, R-8 spindle with 12" of cross travel, 36" of longitudinal travel. Then it has a ...more
NEW Jet #JMD-15 Mill-Drill, R-8 spindle, step pulley head, single phase, 1/2" drill chuck, vise, free stand
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Seller: T & S Tool & Supply Co Inc
Location: Toledo, OH
Mfr: Jet
Model: JMD-15
Year: 2022
This is a NEW Jet JMD-15 Milling & Drilling Machine and is considered a bench mill and includes the stand. The spindle is R-8 and that spindle travel is 3-1/2", with the quill diameter ...more
NEW Jet #JMD-18, Mill/Drill, 8 speed spindle, 1/2" drill chuck w/arbor, 2 -HP, single phase, free stand
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Seller: T & S Tool & Supply Co Inc
Location: Toledo, OH
Mfr: Jet
Model: JMD-18
Year: 2022
This is a NEW Jet JMD-18 Mill/Drill machine that is mounted on a FREE stand & also includes a 1/2" drill chuck w/arbor, adjustable carbide tipped facemill and an adjustable vise. ...more
Jet #JTM-4VS, vari-speed milling machine, 9" x49" table, 3 HP, AcuRite 3-Axis digital read out
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Jet
Model: JTM-4VS
This is a USED Jet JTM-4VS vertical milling machine, in original owners shop & under power! The stock number is 690182 and serial number is 6100917, it has a 9"x49" table with 34" of ...more
Millport #2, step pulley VERTICAL milling machine, 9" x42" table, 2 HP, power draw bar, digital read out
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Millport
Model: 2
This is a USED Millport 80-5440 RPM Step Pulley Type Milling Machine. It has a 9"x42" table with a R-8 spindle and 12" of cross travel, 30" of longitudinal travel. Then it has a one-shot ...more
Bundler Machines - Shrink Bundlers
1 Result
Bilz #ISG2000 ThermoGrip, tool holder heat shrink unit
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Bundler Machines - Shrink Bundlers
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Bilz
Model: ISG2000
This is a USED Bilz ISG2000 ThermoGrip Heat Shrink Unit for machine toolholders to install carbide tools only. Made in Germany, the serial number is 0322 23/02 and it is 208-volt, 3-phase. ...more
Clamps and Vises
6 Results
Kurt #D60-4-SA, Cast Iron swivel base for 6" milling machine vises
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Clamps and Vises
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Kurt
Model: D60-4-SA
This is one of many of a USED D60-4-SA Kurt Swivel Base that we stock for their D60, D675 and D688 6" vises. Quality will vary on these used bases. They will also fit many other competitors ...more
Kurt #D675, 6" milling machine vise w/handle
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Clamps and Vises
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Kurt
Model: D675
This is one of several of a USED 6" Kurt vise that includes the handle & has an opening of 7-1/2". A new Kurt 6" vise is $682.00, so it should be a great buy for someone! Need new 6" ...more
Kurt #D80, 8" milling machine vise w/handle, used
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Clamps and Vises
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Kurt
Model: D80
This is one of many USED D80 Kurt 8" milling machine vise's that we stock & includes the handle & have a 8" opening. A new Kurt 8" vise lists at $1850.00, so this should be a ...more
Kurt #D80-4-SA, Cast Iron swivel base for 8" milling machine vises
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Clamps and Vises
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Kurt
Model: D80-4-SA
This is one of several D80-4-SA Kurt Swivel Base for their D80 and D810 8" vises, quality on these used bases will vary. They will also fit many other competitors 8" vises as well ...more
NEW Kurt #DX6, 6" Milling Machine Vise
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Clamps and Vises
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Kurt
Model: DX6
This is Kurt's DX6 CrossOver 6" Vise that combines all the great s of their D688 and 3600V Vise's. Along with new state-of-the-art workholding s, the DX6 vise achieves new levels in ...more
New & Unique 10-station parts holding system for Kurt 6" milling machine vises
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Clamps and Vises
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Introducing Sveconek's "NEW" high capacity workholding system's! A versatile and patented milling machine vise system where you can hold 1 or 2 parts & up to 10! ...more
Jacobs spindle nose lathe collet chuck with LO spindle back & flex collet set
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Collet Chucks
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Jacobs
This is a USED Jacob Lathe Spindle Nose Lathe Chuck that uses their rubber flex collets, the nose just spins off and the collets just pop in! The spindle back is a LO type for lathes with ...more
Jacobs spindle nose lathe collet chuck with D1-6 Camlock spindle back
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Collet Chucks
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Jacobs
This is a USED Jacob Lathe Spindle Nose Lathe Chuck that uses their rubber flex collets, the nose just spins off and the collets just pop in! The spindle back has 3 spindle or camlocks on ...more
TG-150 Collet chuck with CAT-50 shank
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Collet Chucks
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
This is a USED TG-150 Collet Chuck that has a CAT-50 shank and a gage length of 3-1/2", that is the distance from the back of the flange to the end of the cap that holds the collets on. ...more
TG-100 Collet chuck with CAT-50 shank
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Collet Chucks
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
We are selling 2 pieces of a CAT50 Collet Chuck that will hold a TG-100 Collet, they are $80.00 each. They have a gage lengths of 3-1/4", which is the measurement from the back of the ...more
Newall 12" x108" Travel Lathe DRO System w/Headstock Display Mount, in original packaging, NEW
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Digital Readout Systems
Seller: T & S Tool & Supply Co Inc
Location: Toledo, OH
This is a NEW Newall 12"x108" travel digital readout lathe package that includes all the hardware for mounting on your lathe! THESE ARE TRAVELS, not the lengths of the scales, so keep that ...more
Newall 26" x192" Travel Lathe DRO System, w/Headstock Display Mount, in original packaging, NEW
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Digital Readout Systems
Seller: T & S Tool & Supply Co Inc
Location: Toledo, OH
This is a NEW Newall 26"x192" travel digital readout lathe package that includes all the hardware for mounting on your very large lathe! THESE ARE TRAVELS, not the lengths of the scales, so ...more
Jacobs 14N 1/2" Ball Bearing drill chuck on CAT-50 arbor (2 available)
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Drill Chucks
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Jacobs
This is a USED Jacobs #14N Ball Bearing Drill Chuck that is mounted on a CAT-50 Milling Machine Arbor and we have 2 pieces available and selling by the piece at $200.00 each. Chuck's ...more
Jacobs ball bearing & scroll chucks on NMTB, CAT, R-8 & Stainless Steel shank arbor' s or w/o arbors
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Drill Chucks
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Jacobs
You want drill chucks.we have drill chucks! We are a Jacobs Distributor and stock every NEW chuck that they make! AND we stock every arbor that is made to fit them, in several different ...more
Jacobs 18N 3/4" Ball Bearing drill chuck on NMTB-50 arbor
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Drill Chucks
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Jacobs
This is a USED Jacobs #18N Ball Bearing Drill Chuck that is mounted on a NMTB-50 Milling Machine Arbor. It has a 1/8" to 3/4" capacity and comes with a K4 chuck key. New price on ...more
Ziggy gun drill speed inducer & drill driver, coolant type, NMTB-50 arbor
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Drill Tooling
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
This is a very unique fixture that was made by Jirgens in Kalamazoo Michigan. Called a Ziggy Gun Drill Fixture, it was designed to specifically to drive carbide tipped gun drills. It has a ...more
15-3/4" Lathe face plate with Buck D1-6 back plate, 2" thick, 2-5/8" center hole diameter
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Face Plates
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
This is a USED, unbranded 15-3/4" face plate that has a D1-6 back. You can identify that back by the stud diameter which is 7/8" and the number of studs or camlock pins, which is 6. But ...more
17" Lathe face plate with D1-6 back plate, 2-3/4" thick, 2-3/4" center hole diameter
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Face Plates
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
This is a USED, unbranded 17" face plate that has a D1-6 back. You can identify that back by the stud diameter which is 7/8" and the number of studs or camlock pins, which is 6. But this ...more
17-1/2" Face Plate with D1-6 Back
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Face Plates
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
This is a USED, unbranded 17-1/2" face plate that has a D1-6 back. You can identify that back by the stud diameter which is 7/8" and the number of studs, which is 6. The plate is 2-1/8" ...more
17-1/2" Lathe face plate w/ A-6 Back
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Face Plates
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
This is a USED, unbranded 17-1/2" face plate that has a A-6 back. You can identify that back by the bolt size of your lathe, which is 1/2"-13 and the number of holes which is 6, that are on ...more
24" Lathe face plate with D1-6 back plate, 2-1/2" thick
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Face Plates
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
This is a USED, unbranded 24" face plate that has a D1-6 back, it does not have camlocks, but we will put them in when sold.we stock them all! You can identify that back by the stud ...more
16 gauge Roper Whitney #137L, manual foot shea
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Foot Shears
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Roper Whitney
This is a used Roper Whitney Pexto 16-gauge footshear with a 37" wide table and shear width. It s a front squaring arm on the table, graduated scale on front side of table and 0-28" ...more
Solberga #SEnr7, vertical drill press, 24" geared head, 8 speed, #3 Morse taper, 3 HP
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Gear Head Drills
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Solberga
Model: SENR7
This is a USED 24" Solberga Geared Head Drill Press and is made in Sweden. It has feeds of.004",.007" and.011" and is a #3 morse taper spindle. Machine has 8 speeds, 60, 120, 162, 324, 261 ...more
Horizontal Band Saws
1 Result
7" x 12" Jet #HVBS-712, vertical & horizontal portable band saw, uses 7'9"bi-metal blade, new
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Horizontal Band Saws
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Jet
Model: HVBS-712
One of our biggest sellers! With a 7" round capacity at 90, 4-1/2" round capacity at 45 and a 7" throat depth, saw also has a 45 swivel vise! It uses 3/4" wide bi-metal blades that are ...more
Horizontal CNC Machining Centers
1 Result
Starrag Heckert #Dynamic-CWK500D, 29.5" X, 29.5" Y, 27.6" Z, 15000 RPM, Fanuc 16i-M, chip conveyor, HSK63, dual pallet, 3-Axis, 2001
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Horizontal CNC Machining Centers
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Starrag
Model: DYNAMIC-CWK500D
Year: 2001
This is a USED Starragheckert Dynamic CWK500D horizontal machining center made by Starrag-Hechert in Germany and Switzerland, Serial #16035, that is a 2001 machine. It s a dual palletizing ...more
NEW Uni-Hydro #45-14 Ironworker, 3" x3" x3/8" angle shear, 14" bar/plate capacity, 1-1/2" punch capacity
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Ironworkers
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Uni-Hydro
Model: 45-14
Year: 2023
This is a NEW Model #45-14 Uni-Hydro 45-Ton Ironworker with a 6" punch throat depth and capacity of a 1-1/8" punched hole in 1/2" material and 1-1/2" in 3/8" material. Unit does not include ...more
6" 3-Jaw universal lathe chuck D1-4 back with chuck key, 1.5" center hole
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Lathe Chucks
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
This is a USED Import 6" 3-Jaw universal style lathe chuck that has a D1-4 camlock backplate on it and has an approximately 1.5" center hole thru it. This D1-4 can be identified by the ...more
Lead Screw Type Tappers
1 Result
Procunier #3000A, lead screw tapping machine
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Lead Screw Type Tappers
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Procunier
Model: 3000A
This is Procunier's Model #3 or 3000A Lead Screw Tapping Machine, it is a Series 29053 with a Serial Number of B9255 and best of all, made in the USA in Florida! Can be run manually or ...more
8" Baldor #8100WD, heavy duty pedestal type bench grinder with stand, 3/4 HP
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Pedestal Grinders
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Baldor
Model: 8100WD
This is a USED Baldor 8" Bench Grinder and is a model #8100WD, it has a grinding wheel on one side, then a wire wheel on the other side. It is 3/4 H.P., 115/230-Volt single phase, 1800 ...more
Precision and Second Operation Lathes
1 Result
Jet #BDB-919, 9" x 19" belt drive bench lathe with stand, Spindle bore is 3/4", 130-2000 RPMs, #2MT tailstock, new
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Precision and Second Operation Lathes
Seller: T & S Tool & Supply Co Inc
Location: Toledo, OH
Mfr: Jet
Model: BDB-919
This is a NEW Jet BDB-919 9"x19" bench type lathe that comes with a stand. Actual swing over the bed is 8-3/4" with the swing over the cross slide of 5" and a center distance of 19". ...more
Reciprocating Surface Grinders - Horizontal Spindle
2 Results
6" x 18" Gardner #618, manual surface grinder, Walker ceramic PMC, 1 HP
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Gardner
Model: 618
This is a USED Gardner model #618 manual Surface Grinder, serial #49617. It s a 6"x18" O.S. Walker ceramic permanent magnetic chuck and uses a 7" surface grinding wheel. And a larger chuck ...more
12" x 30" Kent USA #SGS-1230AHD, automatic hydraulic surface grinder, 5 HP, 1999
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Kent
Model: SGS-1230AHD
Year: 1999
This is a USED Kent SGS-1230AHD Automated-Hydraulic Surface Grinder and it is still in the shop and under power, serial #38448, which is a 1999 machine. In addition, it is a one-man shop ...more
Rotary Screw Air Compressors (Positive Displacement)
1 Result
95 cfm, 125 psi, Ingersoll-Rand #U25H-SP, rotary screw air compressor, 25 HP, 230/460 V.
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Ingersoll-Rand
Model: U25H-SP
460-Volt! Has a 120 tank, auto-drain and we do not know the hours, thus we are selling the unit AS-IS! Compressor has been in storage for over 10 years, was purchased to be used, they never ...more
15" Troyke #R-15/DA-15A, horizontal dividing head type rotary table with 2 indexing plates (5 available)
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Rotary Tables
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Troyke
Model: R-15/DA-15A
These are a USED 15" Troyke R-15/DA-15A Horizontal Rotary Table and they are a dividing head type that includes 2 indexing plates with each unit. We have "FIVE" tables available and they ...more
11" Moore, vertical-horizontal Ultra-Precision rotary table in wooden case
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Rotary Tables
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Moore
This is a USED and old, but very, very precision vertical-horizontal Moore Rotary Table. Serial number listed is L.R.T. 2624 and is dated 1978. The original and complete inspection record ...more
20" Yuasa, vertical-horizontal rotary indexing table, 6 T-Slots
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Rotary Tables
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Yuasa
This is a USED Vertical-Horizontal Rotary Table made by Yuasa. They considered it a 20" table, but it is actually 19.69" (500mm) in diameter. The table works as an index center in the ...more
20" Clausing #2284, variable speed drill press w/28" x76" custom table & foot switch
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Single Spindle Drill Presses
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Clausing
Model: 2284
This is not your standard drill press! This is Clausing's 20" Drill Press that is USA Made and has several optional s. It is a 150 to 2000 variable speed model that has a ...more
Tank Mounted Air Compressors
2 Results
NEW 5 -HP Emax Hulk, Silent Air Vertical Air Compressor, 80 gallon, 230-Volt, Single Phase, 18-CFM@100 psi
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Tank Mounted Air Compressors
Seller: T & S Tool & Supply Co Inc
Location: Toledo, OH
Mfr: Emax Hulk
Model: 5-H.P.
Year: 2022
This is Emax's Hulk Silent Air Compressor that is designed to deliver high air power output with very little noise! These commercial grade pumps are designed with heavy gauge steel ...more
NEW 7.5 -HP Emax Hulk, Silent Air Vertical Air Compressor, 80 gallon, 230-Volt, Single Phase, 18-CFM@100 psi
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Tank Mounted Air Compressors
Seller: T & S Tool & Supply Co Inc
Location: Toledo, OH
Mfr: Emax Hulk
Model: 5-H.P.
Year: 2022
Dumore #44-011, tool post grinder in metal case w/accessories, 1/4 HP, 115 V., 3.6 amps
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Tool Post Grinder
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Dumore
Model: 44-011
This is a USED Dumore 44-011 Tool Post Grinder and it is housed in a nice metal box for ease of storage and portability! It includes a large assortment of wheels in several different sizes ...more
Themac, tool post grinder in plastic case w/accessories, for ID or outside dimension grinding, 1/2 HP
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Tool Post Grinder
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Themac
This is a USED Themac Tool Post Grinder and it is housed in a Themac plastic box for ease of storage and portability! For I.D. or O.D. grinding, it is recommended for 12" to 15" lathes and ...more
Tooling and Accessories - Miscellaneous
2 Results
CNC vertical machining center Foundation Table for Haas #VF-4, Chick Workholding, for 16mm T-slots (2 available)
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Chick Workholding
Model: CNC VMC FOUNDATION TABLE FOR HAAS #VF-4
This is a USED 2-Piece Chick VMC Table Foundation for a Haas VF4 milling machining center with 16mm T-Slots. It includes 2 plates and one measures 698mm x 508mm, the other one is 648mm x ...more
Permanent Magnetic Precision Sine Plate, Suburban Tool Suburbarn Tool #MSPC-66-FP, 6" x 6"
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Suburban Tool
Model: PERMANENT MAGNETIC PRECISION SINE PLATE
This is a USED Suburban Tool 6"x6" Magnetic Sine Plate with a Serial Number of 887 & it is not light, weighs in at 48 pounds! Made in the USA, it is made of steel that is hardened to ...more
Vertical Band Saws
2 Results
20" x 13" Powermatic, vari-speed vertical band saw with contouring attachment & blade welder
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Vertical Band Saws
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Powermatic
This is a USED Powermatic 20" Variable Speed Vertical Bandsaw that has a contouring attachment, but we do not know if is complete. Has a 20" throat and clearance under the head to the table ...more
Roll-In #EF1459, vertical band saw with worklight & casters, 3/4 HP, 115 V.
T & S Tool & Supply Co Inc | Holland, OH | Roger Thomas |
Category: Vertical Band Saws
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Roll-In
Model: EF1459
This is a USED Roll-In EF1459 Vertical Bandsaw that s their gravity feed roll in head! It also has casters & worklight that are both options, along with a custom chip pan, rear blade ...more