Sterling Machinery Exchange
9310 Garvey Ave
South El Monte, CA 91733-1097
South El Monte, CA 91733-1097
Platinum Level Dealer
Surplus Record Dealer Since 1970
Contact
About
Sterling Machinery Exchange, established in 1954, is best known for fabricating equipment and chip making machinery. One of the largest stocking machinery surplus dealers in Southern California, has an enormous showroom consisting of over 1500 new and used machines that are available for viewing under power for your inspection.Sterling Machinery Exchange, is a Surplus Record Platinum Level Dealer:
1. Stocking dealers with real inventories they own or control.
2. Have met Surplus Record's standards for ethical dealings with their customers since 1970.
3. Have been visited in-person by Surplus Record staff every year.
4. Enjoy 50 years listing with Surplus Record without unresolved complaint or incident.
Products & Services
- Blenders
- Brakes, Press
- CNC Machinery
- Coil Handling/Processing Equipment
- Compressors Air & Gas
- Drills
- Grinders
- Ironworkers
- Lathes
- Presses
- Rollformers
- Rolls
- Saws
- Shears
- Welding Equipment
Associations & Affiliations
| Additional Contacts | Address | Phone |
|---|---|---|
| Adam Mattes | Los Angeles, CA | 626-444-0311 |
491 listings in 96 categories
4-Roll Plate Bending Machines
4 Results
60" x 5/16" Comeq #3-RSP-180/5, 4-roll plate bending machine, 0.354" bending capacity, 60" forming width, 61.05" work length
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: 4-Roll Plate Bending Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Comeq
Model: 3 RSP 180/5
8' x 1" Faccin #4HEL, 4-roll, hydraulic plate roll, hydraulic drop end, emergency stop, pedestal stand, 2006, #A5983
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: 4-Roll Plate Bending Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Faccin
Model: 4HEL
Year: 2006
Bending Capacity 1" x 8' number of rollers: 4 maximum sheet width: 3100 mm diameter of the side rollers: 230 mm diameter of the upper roller: 320 mm diameter of the gagged roller: 300 ...more
120" x 0.625" Durma #HRB-4-3016, CNC hydraulic plate roll, 4 rolls, 11.8"-12.9" roll diameter, hydraulic drop end, #C5236
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: 4-Roll Plate Bending Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Durma
Model: HRB-4-3016
120" x 1.73" Durma #HRB-4-3040, 4-roll hydraulic plate roll, NC Control, rectilinear guides, hydraulic drop end, 2011, #C5157
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: 4-Roll Plate Bending Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Durma
Model: HRB-4-3040
Year: 2011
Bending Capacity 1.73" x 120" Maximum Bending Thickness 1.73" Maximum Bending Length 120" Type Hydraulic Weight 80,000 LBS. Dimensions ( L x W x H ) 248x91x102 Guide Arms To Be Shipped ...more
Adjustable Swing Away Bed Horn Presses
1 Result
20 Ton, V & O #41N, 2" stroke, 15" x10" bed, s/n #72068, used, #8877
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Adjustable Swing Away Bed Horn Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: V&o
Model: 41N
Tonnage 20 Stroke 2" Ram Adjustment 3" Shut Height 7" - 13" Bed Size (L-R, F-B) 15" x 10" Ram Size (L-R, F-B) 4" x 5" Throat 6" Horn Hole Strokes Per Minute 3" Dimensions (WxDxH) 28" x 42" ...more
Alligator Shears
1 Result
6" Airflex, Alligator shear machine, #A2307
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Alligator Shears
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Airflex
Blade Length 6" Horsepower 5 H.P. Dimensions (L x D x H) 64" x 80" x 52".
5.5" x 5.5" x 3/4" Comac #308HV4, hydraulic angle roll, heavy duty, 15.375" roll diameter, 2011, #A6615
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Angle Bending Rolls
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Comac
Model: 308HV4
Year: 2011
Capacity 5-1/2" X 3/4" Flat Bar Hard Way 8" x 2" Square Bar 3" Pipe Schedule 40 5" Round Tube 6-1/2" Round Bar 3-3/8" Square Tube 4" x 5/16" Rectangular Tubing 5-1/2" x 2" x 5/16" Flat Bar ...more
6" x 6" x 1" Roundo #R-7-S, hydraulic angle bending roll, 3-rolls, universal dies, variable roll speeds, lateral angle guide rolls, #CD5216
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Angle Bending Rolls
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Roundo
Model: R-7-S
Year: 1998
Number Of Rolls 3, Universal Dies (Shown in Photos) for Flat, Channel, Angle, Square LED Position Indicator 2- Speed Roll Adjustment Variable Roll Speeds Horizontal Operation Lateral Angle ...more
60 Ton, Greenerd #H-60-AD-21, hydraulic arbor press, 20" stroke, 10" DL, 18 throat, foot pedal, #A1384
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Arbor Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Greenerd
Model: H-60-AD-21
Scotchman #Shear-Master-610, 24" heavy duty flat bar shear, 4-way reversible blades, hydraulic, warranty, new, #smshearmaster610
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Bar and Billet Shears
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: SHEAR-MASTER-610
Shearing Capacity: 1" x 12", 3/4" x 16", 1/2" x 24" Type Hydraulic Strokes Per Minute Full Stroke 12 Half Stroke 30 Back Gauge Electric Back Gauge Optional Equipment Available: Part# Work ...more
AT Industrial #ML-580, bar feeder, 0.2"-3.13" capacity, 60' bar length, #A6924
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Bar Feeders and Loaders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: At Industrial
Model: ML-580
0.08" - 0.313" AIM #AFM-3D8-T, CNC 3D wire bending forming, horizontal feed reel, #C5214
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Bar, Pipe and Tube Benders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Aim
Model: AFM-3D8-T
Year: 2002
Wire Diameter Range (Millimeters) 2mm-8mm Wire Diameter Range (Inches) 0.080"- 0.313" Max Wire Tensile At Max. Wire Diameter 620 N/mm2 Max Wire Tensile At Max. Wire Diameter kPSI 90 kPSI ...more
1-1/8" Baileigh #HMB-1125M, mandrel tube bender, 1.125" x.065" OD, 4" CLR, new, #SMHMB1125M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Bar, Pipe and Tube Benders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: HMB-1125M
Dimensions (L x W x H) 72" x 44" x 68" Stainless Steel 1.0" x 0.065" Capacities Round (OD). Maximum CLR 4" Minimum CLR 0.075" Maximum Bend Angle 200 Degrees Bend Direction Clockwise Mandrel ...more
1.65" x .078" Baileigh #MB-42CNC-R-ECO, hydraulic bending machine, #C5238
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Bar, Pipe and Tube Benders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Baileigh
Model: MB-42CNC-R-ECO
2" Baileigh #RDB-150, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB150
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Bar, Pipe and Tube Benders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: RDB-150
Overall Capacity 2". Schedule 40 Mild Steel Pipe 2" Aluminum Pipe 2" Stainless Steel Pipe 1.5" Mild Steel Round Tube 2.5" Mild Steel Round Tube Wall 0.125" Aluminum Round Tube 2.5" Aluminum ...more
2" Baileigh #RDB-150-AS, hydraulic rotary draw tube & pipe bender, foot pedal, #SMRDB150AS
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Bar, Pipe and Tube Benders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: RDB-150-AS
Overall Capacity 2". Schedule 40 Mild Steel Pipe 2" Aluminum Pipe 2" Stainless Steel Pipe 1.5" Mild Steel Round Tube 2.5" Mild Steel Round Tube Wall 0.125" Aluminum Round Tube 2.5" Aluminum ...more
Sterling Machinery Exchange has 6 more listings in Bar, Pipe and Tube Benders.
Bed and Knee Milling Machines - Horizontal
1 Result
Kearney & Trecker #430TF Series, plain type universal horizontal milling machine w/universal head, 19-1/2" x 88", #A1964
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Kearney & Trecker
Model: 430TF
Weight 12,105 Lbs. Table Size 80" x 20" Vertical Table Travel 21" Longitudinal Table Travel 42" Cross Table Travel 14" Speed Selector Variable Speed Spindle Speed (16) 15 - 1500 RPM Table ...more
Bed and Knee Milling Machines - Vertical
22 Results
Acer #3VKH, Vertical Milling Machine, 10" x 50" table, 27" X, 15" Y, 19" Z, 3 HP, 4200 RPM, Newall DP700 digital read out, Power Feed
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Acer
Model: 3VKH
Acra #AM-3V, 10" x54" tbl., 3 HP, 39.5" X, 16.5" Y, 16" Z, 3-Axis, Centroid, digital read out, power draw bar, #A6744
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Acra
Model: AM-3V
Table Size 10" x 54" X Axis Travel 39 1/2" Y & Z Axis Travel 16 1/2". 16" Ram Travel 18" T-Slot Number, Size 3, 5/8" Spindle Nose Taper # 40 Speed Selector Variable Speed Spindle RPM ...more
Acra #AM4V-CNC, 10" x54" tbl., 5 HP, 34" X, 15" Y, 5" Z, 3-Axis, Centroid, Torque-Rite power draw bar, #A6745
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Acra
Model: AM4V-CNC
Capacity 10" x 54" Table Load Capacity 990 Lbs. Table To Spindle Nose 20" Longitudinal Travel (X Axis) 34" Cross Table Travel (Y Axis) 15" Vertical Knee Travel (Z Axis) 5" Spindle Nose #40 ...more
ATrump #15928, 9" x49" tbl., 3 HP, Fagor 2-Axis digital read out, table power feed, automatic lube, #A6552
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Atrump
Model: 15928
Table Size 9" x 49" Work Table STD.1270x254mm (50x10).OPT.1372 x254mm (54x10) X Axis Travel STD.927mm (36-1/2).OPT.970 mm (38-1/2) Y axis travel 400mm (15-3/4) Z axis travel 406mm (16) ...more
ATrump #K3VL, vertical miller, 10" x50" table, 3 HP, 38.5" X, 15.75" Y, 16" Z, #A6551
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Atrump
Model: K3VL
Work Table STD.1270x254mm (50x10).OPT.1372 x254mm (54x10) X Axis Travel STD.927mm (36-1/2).OPT.970 mm (38-1/2) Y axis travel 400mm (15-3/4) Z axis travel 406mm (16) Quill Diameter 86mm ...more
Sterling Machinery Exchange has 17 more listings in Bed and Knee Milling Machines - Vertical.
No. CM-50DS Baileigh, double sided beveling machine, 2" max bevel width, 2.75" thickness, 3.9 FPM, automatic feed speed, detachable pendant
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Beveling Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: CM-50DS
No. CM-15DS Baileigh, .59" W, automatic feed, horiz/verti positioning,.236"-1.57" thick, #A5581
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Beveling Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Baileigh
Model: CM-15DS
Maximum Bevel Width 0.59" Bevel Angle 15 to 50 (Variable) Material Thickness 0.236" to 1.57" Blade Speed 2800 rpm Cutting Speed 11.4 fpm Motor 2 H.P. Dimensions (L x W x H) 27" x 19" x 40" ...more
Boring Mills, Horizontal, Table Type
1 Result
4.3" Vanguard #TPX6111C/3, 42" x43" rotary table, Newall digital read out, 62.9" X, 47.2" Y, 55" Z, #A5555
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Boring Mills, Horizontal, Table Type
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Vanguard
Model: TPX6111C/3
Capacity 4.3" Rotary Table Size 42" x 43" Table Load Capacity 6,613 Lbs. Facing Plate Diameter 24.8" Spindle Taper ISO 50 Spindle Speeds 8 - 1100 RPM Rapids Travel (X/Y/Z/W) 98.4" Facing ...more
Boring Mills, Vertical, Includes Vtls
1 Result
54" Bullard #Man-Au-Trol, vertical turret lathe, 4-jaw type, updated electrics, #A6440
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Boring Mills, Vertical, Includes Vtls
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Bullard
Model: MAN-AU-TROL
Table Diameter (4 Jaw Type) 54" Weight 35,000 Lbs.
No. Tipmaster, Puckmaster, tipping system, 4 loading bins, #A5781
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Briquetters
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Model: TIPMASTER
4 Bins For Loading.
C Frame Hydraulic Press Machines (Gap Frame)
7 Results
5 Ton, Unipunch #1012-UP, air over hydraulic deep throat press, foot operated, air controls, regulators, valves, used, #1771
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Unipunch
Model: 1012-UP
Throat Depth 15 1/2" Table Size 15"(L to R) x 16 1/2" (F to B) Capacity 1/4" - 5/8" Hole Open Height To The Bolster 7" Bolster Thickness 1" Type C-Frame Dimensions (W x D x H) 33" x 44" x ...more
8 Ton, Hannifin #OG-F8B-8-2-2-PB6, 12" stroke, dual palm Control, air oil clr, 7-1/2 HP, #7016
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Hannifin
Model: OG-F8B-8-2-2-PB6
Tonnage 8 Stroke 12" Daylight 17" Bed Size (L-R, F-B 16" x 14 " Ram Diameter 1 5/8" Hole in Bed 8 " x 2 " Piston Diameter 2" Throat 10" Type C-Frame Horsepower 7.5 H.P. Dimensions (LxDxH) ...more
20 Ton, Hannifin #F101, dual hand control, pressure gauge, 5 HP, serial #C42750, #7878
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Hannifin
Model: F101
Tonnage 20 Stroke 14" Daylight 17" Bed Size ( L-R, F-B ) 20" x 18" Ram Diameter 3 1/2" Hole In Bed 6" x 10" Throat 11" Type C-Frame Horsepower 5 H.P. Dimensions ( L x W x H ) 47" x 35" x ...more
35 Ton, Denison #Multipress-LA35C, hydraulic, 15" stroke, #A3563
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Denison
Model: MULTIPRESS-LA35C
Tonnage 35 Stroke 15" Bed Size (L-R, F- B) 20" x 30" Bore 4-3/4" Ram 3-1/4" PSI Rating 3,950 Horsepower 30 H.P. Voltage Dimensions (W x D x H) 53" x 61" x 100" Weight 15,000 Lbs. Voltage ...more
50 Ton, Hannifin #500-41, tonnage gauge, 15 HP, serial #D31940, #6649
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Hannifin
Model: 500-41
Tonnage 50 Stroke 18" Daylight 18" Bed Size (L-R, F-B) 40 1/2" x 24" Ram Size (L-R, F-B) 23" x 22" Ram Cylinder Diameter 5 1/2" Type C-Frame Horsepower 15 H.P. Dimensions (LxWxH) 70" x 50" ...more
Sterling Machinery Exchange has 2 more listings in C Frame Hydraulic Press Machines (Gap Frame).
Cannabis Processing Machinery
1 Result
Yamato #ADW-214SD, 2-200 grams, cannabis comb. multi- head scale & jar fill line, 2019, #CD5244
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Cannabis Processing Machinery
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Yamato
Model: ADW-214SD
Year: 2019
Model Weighing Range 2-200 gr. (at single dump) Maximum Weigher Speed 160 weighments per minute Weigher Volume 500 ml. maximum volume per single discharge Maximum Product Dimensions Cannot ...more
CNC Bar, Pipe and Tube Benders
1 Result
1-1/4" Baileigh #MPB-275, 1/2" x2" flat bar, bidirectional, RDB-250, 6 RPM, lifetime tech support, 4 shear pin, new, #SMMPB275
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Bar, Pipe and Tube Benders
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: MPB-275
Weight 750 lbs Capacity Round Solid 1" Square Solid 1" x 1" Flat Bar (Easy Way) 1/2" x 2" Round Pipe (Schedule 40) 1-1/4" Maximum Bend Speed 180 Degrees in 5 Seconds Bend Direction ...more
24" x 40" Atrump #RL-2440NC, 2-Axis CNC, 3-Jaw 12" chuck, Centroid T400i with 15" Color LCD, 10 HP, new, #SMRL2440NC
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Engine Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: RL-2440NC
Basic Dimensions Height of Centers 12" Swing Over Bed 24" Swing Over Cross Slide 16" Distance Between Centers 40" Bed Width 13.78". SPINDLE Spindle Nose D1-8 Spindle Bore 3-3/8" Spindle ...more
CNC Horizontal Boring Mills - Table Type
1 Result
4" Knuth #BO-110-CNC, horizontal boring mill, 1.97" drill, 7" face slide, 43" x 38" table, 5500 lb. capacity, 35" X, 35" Y, 24" Z
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Knuth
Model: BO 110 CNC
CNC Horizontal Spindle Surface Grinders
5 Results
6" x 18" Boyar-Schultz, grinder, 7" x 1/2" x 1-1/4" wheel, 3450 RPM, 1 HP, one shot lube
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Boyar-Schultz
8" x 18" Okamoto #ACC-8.20EX, 8" x1" x1.25" wheel, plunge feed, teach mode
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Okamoto
Model: ACC-8.20EX
Capacity 8" x 20" Longitudinal Travel: 29.5" Cross Travel: 9.05" Surface Length x Width 21.65" x 7.90" Cross Movement Of Saddle (Automatic Int. Feed) 0.02" - 0.8" Maximum Longitudinal ...more
12" x 24" Acra #ASG-1224AHD, 3-Axis, surface grinder (Okamoto Style), electromagnetic chuck, automatic demag controller, new, #SMASG1224AHD
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: ASG-1224AHD
Capacity 12" x 24" Maximum Grinding (WXL) 12" x 28" Maximum Distance from Spindle Center Line to Table Top 27-1/2" TABLE Chuck Size (WXL) 12" x 24" Maximum Longitudinal Travel 30" Maximum ...more
12" x 24" Chevalier #FSG-1224ADII, precision surface grinder, 14" x 2" x 5" wheel, 16-82 FPM, coolant tank, wheel dresser, electromagnetic chuck, 2010
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Chevalier
Model: FSG-1224ADII
Year: 2010
12" x 24" Okamoto #ACC-12-24DX, electromagnetic chuck, automatic incremental downfeed, 12" x1.5" x5" wheel, 1-82 FPM variable speed, #A6590
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Okamoto
Model: ACC-12-24DX
Capacity 12" x 24" Longitudinal Travel 29.50" Cross Travel 13.4" Max. Distance Spindle To Table 13.6" Wheel Size 12" x 1.5" x 5" Surface Length 23.75" Surface Width 11.80" Wheel Speed 3,600 ...more
Cincinnati #CL-440, Co2 laser, 4000 watts, 5' x10' table, #CD5099
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Cincinnati
Model: CL-440
Cincinnati, #CL-7, Co2 laser cutter, 3500 watts, 6' x 12' table, #CD5111
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Cincinnati
Model: CL-7
Trumpf #TruLaser-3030-Fiber, 3000 watt, 118.11" X, 59.055" Y, 4.5276" Z, Siemens Sinumerik 840D SL, load/unload, 2018, #C5239
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: CNC Lasers
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Trumpf
Model: TRULASER-3030-FIBER
Year: 2018
Atrump #KL2180, 21" swing, 80" between centers, coolant, 10 HP, new
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lathes and Turning Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: KL2180
Overall Capacity 21" x 80". Height of Center 10.53" Swing Over Bed 21" Swing Over Cross Slide 12" Distance Between Centers 80" Width of Bed Ways 13.78" SPINDLE Spindle Nose Mounting STD: ...more
Atrump #KL30120, 30" swing, 20 HP, Centroid T400i Control, coolant, 331-1500 RPM, #SMKL30120, New
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lathes and Turning Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: KL30120
Overall Capacity 30" x 118". Swing Over Bed 30" Center Height to Bed 15" Center Height to Top Cross Slide 9.5" Swing Over Cross Slide 19.5" Distance Between Centers 118" Width of Bed 17.5" ...more
Atrump #S25L, 19" swing, 25 collet chuck, 0.9" bar, Centroid T400I Control w/15" LCD, new, #SMS25L
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Lathes and Turning Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: S25L
Basic Dimensions Max. Turning Diameter 0.984" Swing Over Saddle 19.7". Bed Flat Bed Guide Way Linear on X and Z Axis SPINDLE Spindle Nose Mounting 25 Collect Chuck Max. Bar Capacity 0.984" ...more
Haas #TL-1, CNC Toolroom Lathe, 16" swing x 30" centers, Tailstock, Steady Rest, Rigid Tapping, Coolant, Aloris Tool Post, 3-Jaw 8" Chuck, Haas Vector Drive, 5C Spindle Nose, 2006
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: CNC Lathes and Turning Centers
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Haas
Model: TL-1
Year: 2006
CNC Power Squaring Shears (Inch)
1 Result
1/4" x 10' Accurl #MS8, 40" servo driven Back Gauge, 12-25 SPM, 2020, #CD5219
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Accurl
Model: MS8
Year: 2020
Throat Depth 130 mm Dimensions (L x W x H) 166" X 88" X 84" Working table height 860mm Cutting Capacity 6mm Carbon Steel & 4mm Stainless steel Blades Length 3300mm Cutting Length 3200 ...more
35 Ton, Amada #RG-35S, CNC press brake, 4' overall, NC-9EXII 3-Axis CNC Back Gauge, hand wheel Control, die holder, foot treadle, 1995, #A7036
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Amada
Model: RG-35S
Year: 1995
35 Ton, Piranha #3506, 6' overall, 62" between housing, 4" stroke, 7" throat, Automec 2000, 2-Axis CNC Back Gauge, 2007
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Piranha
Model: 3506
Year: 2007
Open Height 11-1/2" Ram Stroke 4" Throat 7" Length of Bed & Ram 72" Tonnage 35 Ton x 6' Type Hydraulic Distance Between Housings 62" Horsepower 7-1/2 H.P. Return 90 IPM Backgauge ...more
38 Ton, Amada #RG-35S, 3.3' overall, 40.2" between housing, 3.94" stroke, 7.88" throat, 14.58" open, 3-Axis NC-9EXII, 1997, #A6760
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Amada
Model: RG-35S
Year: 1997
Tonnage 38 Length Of Bed 47.3" Distance Between Housings 40.2" Return 1.57 IPS Bending 0.37 IPS Approach 2.16 IPS Ram Speeds: Throat Depth 7.88" Open Height 14.58 Ram Stroke 3.94" Max. ...more
50 Ton, Betenbender #8-50, hydraulic press brake, 8' overall, 6.6" stroke, power Back Gauge w/ LED indicator, (2) 24" front arm supports, #A6976
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Betenbender
Model: 8-50
About Betenbender Manufacturing, Inc.WELCOME --, If you're not already a customer of Betenbender Manufacturing, Inc. we welcome you as a future owner of an American made Betenbender ...more
60 Ton, Cincinnati #60CBBII, CNC hydraulic press brake, 4' overall, 37" between housing, 11" stroke, 10" throat, power Back Gauge w/ LED indicator, electric foot pedal, #A6977
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: CNC Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Cincinnati
Model: 60CBBII
Sterling Machinery Exchange has 22 more listings in CNC Press Brakes.
CNC Vertical Bed Mills
6 Results
Acra MillPower #LCM-50 MillPWR 3AX, 3-Axis CNC, hard chrome ways, one shot lube system, new, #SMLCM50MILLPWR3AX
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Vertical Bed Mills
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: LCM-50
Table Size 9" x 50" Longitudinal Travel 36" Cross Travel 12" Vertical Knee Travel 16" Spindle Quill Travel 5" Spindle Nose R-8 Spindle Speeds 60 - 4,500 RPM Spindle To Table 2-1/8" - 18" ...more
Acra #LCM-50-MILLPWR-2AX, CNC Vertical Bed Mill, 9" x 50" table, 36" x 12" x 16" travels, 5" spindle quill travel, 2-axis
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: CNC Vertical Bed Mills
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: LCM-50 MILLPWR 2AX
Southwestern Industries #DPMSX2, 9" x49" tbl., 31" X, 16" Y, 23.5" Z, Prototrak SMX 3-Axis, floppy disc drive, joystick, 3-Axis digital read out, automatic lube, #A6985
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: CNC Vertical Bed Mills
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Southwestern Industries
Model: DPMSX2
Southwestern Industries #Trak-K3-Edge, 10" x 50" table, 30" X, 15" Y, 15" Z, 2-Axis ProtoTrak EMX, 3-Axis digital read out, power draw bar, spray mist, box ways, 2008
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: CNC Vertical Bed Mills
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Southwestern Industries
Model: TRAK-K3-EDGE
Year: 2008
Southwestern Industries #Trak-KE, 10" x50" tbl, 3 HP, 30" X, 15" Y, 15" Z, air power draw bar, ProtoTrak EMX, 3-Axis digital read out, R-8
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: CNC Vertical Bed Mills
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Southwestern Industries
Model: TRAK-KE
Sterling Machinery Exchange has 1 more listing in CNC Vertical Bed Mills.
Coordinate Measuring Machines (CMM)
3 Results
Brown & Sharpe #Xcel-7.10.7, 14" coordinate measuring machine, 27.6" X, 39.4" Y, 27.6" Z, updated software programmable, Renishaw MCU Lite-2 joystick, 36" x55" granite
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Coordinate Measuring Machines (CMM)
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Brown & Sharpe
Model: XCEL-7.10.7
14" Mitutoyo #Bright-Apex-12.30.10, coordinate measuring machine, Renishaw probe, 2009, #C5235
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Coordinate Measuring Machines (CMM)
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Mitutoyo
Model: BRIGHT-APEX-12.30.10
Year: 2009
14" Mitutoyo #Bright-Apex-12.30.10, coordinate measuring machine, 47.24" X, 118.11" Y, 39.37" Z, RC1 controller, jogbox, Renishaw PH10MQ probe head, 2019
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Coordinate Measuring Machines (CMM)
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Mitutoyo
Model: BRIGHT-APEX-12.30.10
Year: 2019
Die Cutting Press Machines
15 Results
8 Ton, APMC #APM-SA8, hydraulic clicker press, 15.7" x31.5" bed, quick height adjustment, dual joystick, stroke setting timer, #SMAPMSA8
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: APM-SA8
Tonnage 8 Ton Bed Size 15.7" x 31.5" Beam Size 12.6" Head Type Swing Head Surface 12.6" Day Light Opening 4.7" Motor 220 Volt, 1PH (3 Phase is available at no additional charge) Horsepower ...more
15 Ton, USM Hytronic #GSB-3, hydraulic clicker press, 19" x 39" bed, push button Control, #A7149
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Usm
Model: GSB-3
20 Ton, J. Sandt #415, hydraulic double clicker press, 18" x 29" planten head, #A6531
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: J. Sandt
Model: 415
Platen heads 18" x 29" Table 30" x 60".
22 Ton, Apmc #APM-SA22, 3.54 stroke, hydraulic clicker press, quick height adj., dual joystick Control, New, #SMAPMSA22
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: APM-SA22
Tonnage 22 Tons Bed Size 18" x 36" Head Type Swing Beam Size 14.6" Cutting Pad 1" Maximum Stroke 3.54" Maximum Open Daylight 5" Horsepower 1-1/2 H.P. Voltage 220V ~ 3 Phase Dimensions (W x ...more
27 Ton, APMC #APM-SA27, hydraulic clicker press, 3.54" stroke, 5.1" daylight, swing head, manual height adj., dual joystick controls, #A7146
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Apmc
Model: APM-SA27
Sterling Machinery Exchange has 10 more listings in Die Cutting Press Machines.
8" Big Roc Tools #RTC-180, belt/disc sander, #110 V., 1-phase, #A3457
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Disc Sanders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Model: RTC-180
20" Apex #20S pede disc sander, table elevating mechanism, 26-1/2" x 10-1/2" tbl tilt handwheel, #A7059
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Disc Sanders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Apex
Model: 20S
20" Jet #J-4421-2, disc grinder, 27.5" x10.5" tilting table, 230 V., 3-phase, #C5186
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Disc Sanders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Jet
Model: J-4421-2
Depth and Breadth of LineJET offers a full range of machines to fill all your shop needs. Every operation of your project can be trusted to JET. Take a look at all the machines available ...more
20" Precision #DS-20, pedestal disc sander, 26.5" x10.5" table tilt handwheel, #A7118
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Disc Sanders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Precision
Model: DS-20
Disintegrators (Including Tap Disintegrators)
3 Results
Cammann #C-96, 15 KVA, metal disintegrator, CMBL Hd, variable power selector, variable feed & retract, variable sensitivity electro Control, manual hand crank, #A6557
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Cammann
Model: C-96
Table Size 25.5" x 47" Arm Length 42" Horizontal Head Travel 27" Column Height From Table 41" Vertical Head Travel On Column 21.5" Head Spindle Stroke 0"- 8" Head Tilt (Left Or Right) 0- ...more
1-1/4 " Electro-Arc Portable Tap Burner Portable disintegrator can be used with a variety of setup configurations, #2SW, 15 KVA Power Supply 1-1/4" Tap Rating, Portable Tools Cabinet and Cart, EDM, **
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Electro-Arc
Model: 2SW
15 KVA Electro Arc Tap Burner Disintegrator, #1SVOT, T-Slotted Table, #A6999
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Model: 1SVOT
Double or Triple Action Hydraulic Press Machines
1 Result
2000 Ton, Clearing #DH1500-500-108, deep draw triple act, hydraulic, die cushion, 100 HP, #A5394
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Clearing
Model: DH-1500-500-108
Bolster Plate 108" x 12" Bed (L-R, F-B) 71" x 108" Open Height 75" Maximum Combined Capacity (Single Action) 2,000 Tons Maximum Capacity of Punch Slide 1,500 Tons Maximum Capacity Of B.H. ...more
11" x 18" Hardinge #HLV-H, precision tool room lathe, collet closer, tailstock, KDK quick change tool post, #A7086
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Hardinge
Model: HLV-H
13" x 14" Ganesh #CTL-618, precision toolroom lathe, 1-1/4" hole, Newall 2-Axis digital read out, #A6891
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Ganesh
Model: CTL-618
Spindle Capacity With Chuck 6" Capacity w/ Expanding Collets 3" Capacity w/ Round 5C Collets 1-1/16" Capacity w/ Hexagon 5C Collets 7/8" Capacity w/ Square 5C Collets 3/4" Capacity w/ Step ...more
14"/20" x 40" Acra #1440SVS, precision AC vari-engine lathe, 6" 3-Jaw, 8" 4-Jaw, 30-2500 RPM, 5 HP, new, #SM1440SVS
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: 1440SVS
Capacity 14"/20"x40" Swing Over Bed 14" Swing Over Cross Slide 8 5/8" Swing in Gap 20" Distance Between Centers 40" Bed Width 8 1/2" Spindle Nose D1-4 Spindle Bore 1 1/2" Taper of Spindle ...more
14"/21" x 40" Cadillac #1440G, geared head gap bed engine lathe, 5C collet closer, 3-jaw, 1-1/2" hole, KDK tool post, 4-wat tool holder, #A6993
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Cadillac
Model: 1440G
14"/21.5" x 40" Cadillac #1440G, geared head gap bed engine lathe, 5C collet chuck, 1-1/2" hole, Steady Rest, foot brake, coolant pump, #A6992
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Cadillac
Model: 1440G
Sterling Machinery Exchange has 34 more listings in Engine Lathes.
Enerpac, multi segment, 15.5" ring expansion, blower/fan housings, glanger & motor generator frames, pipe couplings, #A5425
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Expanders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Enerpac
Ring Sizes 15.5" Pump PSI 10,000 psi @415 Cu. In. Min. Table Diameter 18", 13 Clamps Hand Control Enerpac Per8418C, Prod Code C1395C.
Enerpac, 10.25"-13.5", multi segment, ring expansion, hydraulic cylinger, glanger & motor gen. frames, pipe couplings, #A5445
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Expanders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Enerpac
Ring Sizes 10-1/4" and 13-1/2", Enerpac Hydraulic Cylinder No Pump Included!.
Enerpac, 9.75"-10", multi segment, ring expansion, hydraulic cylinder, glanger & motor gen. frames, pipe couplings, #A5443
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Expanders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Enerpac
Capacity 9-3/4" - 10", Hand Control Enerpac Hydraulic Cylinder No Pump Included!.
Enerpac, 13.75", multi segment, ring expansion, hydraulic cylinder, glanger & motor gen. frames, pipe couplings, #A5444
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Expanders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Enerpac
Ring Sizes 13-3/4" Table Diameter 22", Enerpac Hydraulic Cylinder No Pump Included!.
Enerpac, 10.75", multi segment, ring expansion, blower/fan housing, glanger & motor gen. frames, pipe couplings, #A5470
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Expanders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Enerpac
Ring Sizes 10-3/4" Table Diameter 42" Horsepower 12.5 H.P., Enerpac Per8418C, Prod Code C1395C.
50 Ton, Whitney #652-50, single end punch, 1977, #7206
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Fabricator Punches
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Whitney
Model: 652-50
Year: 1977
Foot Pedal.
Ebbco #CLS-1-8-180KIL, SWS filtration, ozone generator module, pumps & tanks, 6 filter elements, #A6092
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Filtration Systems
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Ebbco
Model: CLS-1-8-180KIL
(6) Filter Elements, Ozone Generator Module Pumps and Tanks Zero Discharge into Sewer Eliminate Discharge of Cutting Water. Cleans to Reuse Water In A Closed Loop System. Protect Sewer ...more
Gap Frame Single Crank Press Machines
3 Results
25 Ton, Rousselle #3G, gap frame OBI punch press, 3" stroke, 18" throat, #7809
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Gap Frame Single Crank Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Rousselle
Model: 3G
Tonnage 25 Stroke 3" Ram Adjustment 1 1/2" Shut Height 9 3/4" Bed Size ( L-R, F-B ) 20" x 14" Ram Size ( L-R, F-B ) 8 1/4" x 5 1/2" Throat 18" Strokes Per MInute 135 Weight 4400 Lbs., H.P. ...more
160 Ton, Ying-Lin #JZ21-160, manual shut height adj., 13.78" die height, 2007
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Gap Frame Single Crank Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Ying-Lin
Model: JZ21-160
Year: 2007
Capacity 163 Ton Nominal Stroke 6 Slide block stroke 160 Number of stroke Fixed min-1 40 Number of stroke Variable (Optional) min-1 40-60 Max die set height (mm) 350 Die set height ...more
321 Ton, Ying-Lin #JZ21-160, lifting balance cylinder, manual shut height adj. with scale display, 2007
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Gap Frame Single Crank Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Ying-Lin
Model: JZ21-160
Year: 2007
Capacity 321 Ton Nominal Stroke 10 Slide block stroke 200 Number of stroke Fixed min-1 30 Number of stroke Variable (Optional) min-1 25-35 Max die set height (mm) 430 Die set height ...more
H Frame Hydraulic Press Machines
4 Results
10 Ton, Enerpac #Force-10, hydraulic H-frame, 10" ram, 20" between housing, #A6852
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: H Frame Hydraulic Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Enerpac
Model: FORCE-10
Tonnage 10 Ton Voltage 110V, Single Phase Width Between Uprights 20" Width Between Table Channels 4" Minimum Ram to Table 4" Maximum Ram to Table 40" Ram Travel 10" Horizontal Workhead ...more
14 Ton, Portable hydraulic H-frame press, 14" stroke, manual Control, hydraulic pump motor, movable table, #A6808
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: H Frame Hydraulic Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Tonnage 14 Ton Stroke 14" Distance Between Housing 31" Voltage 220V / 3-Phase, Manual Control Hydraulic Pump Motor Movable Table 14" STROKE Portable.
39 Ton, Enerpac, hydraulic H-frame press, #A6809
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: H Frame Hydraulic Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Enerpac
Tonnage 39.
150 Ton, Arcan, heavy duty air/hyd. H-frame press, 7" stroke, 36" BH, 36" x30" work area, sliding head ram, hand lever Control, #A6947
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: H Frame Hydraulic Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Arcan
Hardware Inserting Presses
1 Result
8 Ton, Haeger #824H, hardware insertion press, 8" stroke, 24" throat, bowl feeder, foot pedal Control, #A7139
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hardware Inserting Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Haeger
Model: 824H
1/8" x 49" Aizawa #ARS-312, automatic shear cut, lift tbl.loader, #A4791
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hi-speed Shears
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Aizawa
Cutting Capacity 0.12" x 50" Maximum Thickness 0.4 - 3.2 mm Width 250 - 1250 mm Length 400 - 2000 mm Smallest Size 250 x 400 mm Largest Size 1250 x 2000 mm Cutting Length 28 - 1000 mm Edge ...more
High Speed and Automatic Presses
2 Results
20 Ton, Benchmaster #20-4-2424-2-14PP-20/300-787F, Reeves V.S, hydraulic overload, #4210
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: High Speed and Automatic Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Benchmaster
Model: 20-4-2424-2-14
Stroke 2" Bed Area 24" x 24" Shut Height 14" Strokes Per Minute 20 - 300, Reeves Variable Speed Drive Hydraulic Overlaod Protection Palm Button Controls W/Emergency Stop Pedestal Mounted ...more
20 Ton, Minster #P2-20-24, high-speed punch press,1-1/4" stroke, air clutch & brake, Vamco feeder, dual air counter balance, 24" x19" bed, #A1252
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: High Speed and Automatic Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Minster
Model: P2-20-24
Tonnage 20 Ram Stroke 1-1/4" Ram Adjustment 2" Shut Height 9-3/4" Bed Size (L-R, F-B) 24" x 19" Ram Size (L-R, F-B) 23" x 12" Strokes Per MInute (Variable) 250 - 600 Window Size 7-1/2" ...more
Horizontal Band Saws
40 Results
8" x 13" Ramco #RS-90P, manual horizontal bandsaw, blade, #A7039
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Ramco
Model: RS-90P
8" x 16" Kalamazoo #7AW, 1/2" x .025" x 7' 5" blade, (3) 50/90/155 FPM, wheels, #A5997
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Kalamazoo
Model: 7AW
Capacity 8" x 16" Blade Speed (3) 50, 90, 155 FPM Blade Size 1/2" x.025" x 7'5" Horsepower 0.75 H.P., Wheels No Coolant Pump 110V 1PHASE.
9" x 16" DoAll #C916M, horizontal bandsaw, coolant, #A6987
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Doall
Model: C916M
9" x 16" DoAll #C916M, horizontal bandsaw, manual clamp, #A6986
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Doall
Model: C916M
9" x 16" DoAll #C916S, Horizontal Band Saw (Swivel Head), 275 RPM, 1" x 0.035" x 158" blade, 1995
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Doall
Model: C916S
Year: 1995
Sterling Machinery Exchange has 35 more listings in Horizontal Band Saws.
Horizontal CNC Machining Centers
1 Result
Atrump #LH-117-Centroid, 24 automatic tool changer, 43.3" X, 35" Y, 27" Z, 4500 RPM, 3-Axis, 25 HP, 27.6" x49.6" table, new
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Horizontal CNC Machining Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: LH-117-CENTROID
Table Size 27.6" x 49.6" Load Capacity 1,320 Lbs. Longitudinal Travel 43.3" Cross Travel 35.4" Vertical Head Travel 27.6" Spindle Nose To Table Top 4.6" - 32.3" Spindle Nose to Table Center ...more
True-Trace #TrueTrace-6100-10, hydraulic power unit, #A6001
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hydraulic Power Units
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
20 Ton, Wysong #H-2072, hydra-mechanical press brake, 6' overall, 456" between housing, 8.5" throat, 9" Shut Height, 3" adj, 17-50 SPM, Dyna Bend III 2-Axis CNC back gauge, electrical foot pedal, #A6220
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hydraulic Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Wysong
Model: H-2072
Dimensions (L x D x H) 74" x 46" x91" Strokes Per Minute 17 -50 Tonnage 20 Throat 8 1/2" Shut Height 9" Ram Adjustment 3" Ram Stroke 2 1/2" Distance Between Housing 38' Length of Bed ...more
25 Ton, Amada #RG-25, 4' overall, 40" between housing, 3.94" stroke, 8" throat, manual Back Gauge w/indicator, 2 HP, #A5827
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hydraulic Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Amada
Model: RG-25
Tonnage 25 Length Of Bed 47.3" Distance Between Uprights 40.2" Distance Between Housing 40" Stroke 3.94" Throat Depth 8" Horsepower 2 Dimensions 52"x39"x71" Weight 3,100 LBS Open Height ...more
25 Ton, Chicago, 5.25" stroke, 4.25" SH, 10" open, 7.5 HP, 3 position foot switch, start/stop magnetic push button, #A6821
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hydraulic Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Chicago
Warranty One Year Limited Warranty Tonnage 25 Ton Ram Stroke 5-1/4" Open Height 10" Shut Height 4-1/4" Backgauge No Type Hydraulic Bed Width 11" Horsepower 7.5 H.P. Voltage Dimensions (W x ...more
70 Ton, Betenbender #70T-6', hydraulic press brake, 72" bed & ram length, 54-1/2" between housing, 6" stroke, 6" closed height, 8" throat
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Hydraulic Press Brakes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Betenbender
Model: 70T-6'
About Betenbender Manufacturing, Inc.WELCOME --, If you're not already a customer of Betenbender Manufacturing, Inc. we welcome you as a future owner of an American made Betenbender ...more
70 Ton, Betenbender #8-70T, hydraulic press brake, 8' overall, 78.5" between housing, 8" stroke, 14" open, 24" Back Gauge, light curtains, 2010
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hydraulic Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Betenbender
Model: 8-70T
Year: 2010
About Betenbender Manufacturing, Inc.WELCOME --, If you're not already a customer of Betenbender Manufacturing, Inc. we welcome you as a future owner of an American made Betenbender ...more
Sterling Machinery Exchange has 9 more listings in Hydraulic Press Brakes.
7.5 Ton, Advanced #CPB7.5, hydraulic C-frame press, T-Slotted bolster plate, dual palm Control, limit switch Control, #A2531
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hydraulic Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Advanced
Model: CPB7.5
Table Size 16" x 10-1/2" Throat 8" Piston Diameter 1-3/4" Stroke 6" Daylight 15" Tonnage 7.5 Type C-Frame Voltage 230/460V ~ 3 Phase Horsepower 3 H.P. Dimensions (L x W x H) 24" x 42" x 80" ...more
30 Ton, Logan #6000D-10, 18" stroke, tonnage indicator, ft.treadle, 15 HP, serial #412538, #6222
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hydraulic Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Logan
Model: 6000D-10
Tonnage 30 Stroke 18" Daylight 19" Throat Depth 8 1/2" Bed Area (L-R, F-B) 24 1/2" x 14" Ram Area 6" Ram Cylinder Diameter 4" Type C-Frame Horsepower 15 H.P. Dimensions (LxDxH) 34" x 60" x ...more
60 Ton, Savage #60HTP, 4-post hyd.blanking trim press, light curtains, PLC, 1992, #A2756
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hydraulic Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Savage
Model: 60HTP
Year: 1992
Tonnage 60 Ton Horsepower 30 H.P. Bed & Ram Size (L - R, F - B) 50" x 36" Stroke 6" Day Light 19" Pressing Speeds: Approach Speed 147 @ 25 GPM Pressing Speed 41 IPM @ 7 GPM Return Speed ...more
175 Ton, Columbus Industries, 20" stroke, 4-post hydraulic trim press, dual palm controls, #A1879
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hydraulic Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Columbus
Maximum Tonnage 175 Tons Cutting Strokes 25 Ram Stroke 20" Type 4 Post Trims Flanges Of Part-Maximum Height 10" Total Cycle Time For Cocmplete Trim In Seconds 5 - 6 Die Space: Minimum Shut ...more
250 Ton, Hellen #YK41-550T, 25.9" stroke, 20" SH, 32" open, 12" vertical ram, pedestal Control, #A6632
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hydraulic Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Hellen
Model: YK41-550T
Year: 2015
Vertical Ram Tonnage 250 Ton Opposed Horizontal Rams 150 Tons Each Vertical Press Stroke 26" Vertical Press Open Height 29" Vertical Press Shut Height 3" Horizontal Press Stroke (Left Side) ...more
Sterling Machinery Exchange has 3 more listings in Hydraulic Presses.
Hydraulic Straightening Presses
1 Result
100 Ton, Eitel #RP100, 10" stroke, 38" daylight, rolling fixture w/ centers, infrared controls, #A6558
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Hydraulic Straightening Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Eitel
Model: RP100
Tonnage 100 Ton Ram Stroke 0"- 10" Straightening Stroke 7/8" Daylight 38" Table Size 10 1/2" x 55" Throat Depth 13.75" Ram Speed 60 IPM Return 215 Dimensions (L x W x H) 72" x 65" x 102" ...more
Initial and Double Pinch Plate Bending Rolls
15 Results
5' x 10" gauge Badger State, mechanical initial pinch powered plate roll, 4-1/4" roll diameter, manual drop end, manual rear roll adj., fwd & rev drum switch, #A6696
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Badger State
6' x 1/4" Hendley & Whittemore #3B, mechanical plate & angle roll, 6" roll diameter, #A6952
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Hendley & Whittemore
Model: 3B
6' x 13" gauge New Dimensions #P5.705, hydraulic initial pinch powered plate roll, 5" roll diameter, safety cable, #A7045
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: New Dimensions
Model: P5.705
8' x 1/8" Lown #B-698, mechanical initial pinch power roll, 6" roll diameter, 16.5 FPM, power rear roll adj., air drop end, #A3142
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Lown
Model: B-698
8' x 5/8" Webb #9L-1208, initial pinch power roll, 12" roll diameter, 6-12 FPM, air drop end, power rear roll adj., #A6665
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Webb
Model: 9L-1208
Sterling Machinery Exchange has 10 more listings in Initial and Double Pinch Plate Bending Rolls.
3" x 3" x 5/16" Geka #Microcrop-36, 40 Ton, 6-6/8" throat, 1.5" stroke, 4.5 HP, foot pedal, New, #SMMICROCROP36
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Geka
Model: MICROCROP-36
Tonnage 40 Throat Depth 6-5/8" Length Of Blade 14" Stroke Length Punch 1-1/2" Capacity Punch 1-1/16" thru 1/2" Angles Square 3" x 3" x 5/16" Angles @ 45 Degrees (Leg -In) 2" x 2" x 1/4" ...more
3" x 3" x 3/8" Piranha #P50, 50 ton, mechanical hold down, punch holder, set of angle knives, 5" throat, 3 HP, new, #SMP50
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Piranha
Model: P50
Punch Capacity 50 Ton Hole Size (Max. Material) 13/16" (3/4") Max. Hole Size (Material) 3" (3/16") Throat Depth 5" Open Height 11-1/2" Closed Height w/o Die Block 7-3/4" Stroke Length ...more
3" x 3" x 3/8" Scotchman #DO-135/220-24M, ironworker, 135 ton, dual operation, 12" throat, made in the USA, new, #SMDO13522024M
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: DO-135/220-24M
Rated On: 65,000 PSI Tensile Punching Capacity Special Tooling 4" Max. Dia. Throat Depth 12" Flat Bar Shear (Sabre Blade-Std.) 220 Ton, 24" Length Angle Shear 90 Angle Shear 45 3" x 3" x ...more
4" x 4" x 3/8" Scotchman #5014-ET, 50 ton, 3-station revolving turret, 2" die holders, new, #SM5014ET
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: 5014-ET
Capacity 50 Ton Punch Capacity: Punch 1-1/4" in 1/2" Material Punch 13/16" in 3/4" Material Throat Depth 4" Flat Bar Shear 14" Length Angle Shear 90 Degrees 4" x 4" x 3/8" Angle Shear 45 ...more
4" x 4" x 1/2" Mubea #KBL-1/2, mechanical ironworker, 55 ton, 15-3/4" throat, punch attachment, coper notcher, one shot oil lube, #A7048
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Ironworkers
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Mubea
Model: KBL-1/2
Sterling Machinery Exchange has 20 more listings in Ironworkers.
1/16" - 1-1/4" Morrison #DC, keyseater, 34 SPM, 25.5" between housing, one shot lube, #A7062
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Keyseaters
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Morrison
Model: DC
1-1/4" x 12" Mitts & Merrill #2HYDKS, hydraulic keyseater, tooling, no pit required, #A6953
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Keyseaters
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Mitts & Merrill
Model: 2HYDKS
2" - 24" Mitts & Merrill #2024, Hydraulic Key Seater, 30 FPM, 7-1/2 HP, 38" pit depth
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Keyseaters
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Mitts & Merrill
Model: 2024
12 gauge x 8' Chicago #HBPU812-6, hydraulic powered leaf brake, #A6533
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Leaf Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Chicago
Bending Length 96" Capacity Mild Steel Mild Steel 12 Gauge Capacity Stainless Stee Stainless Steel 16 Gauge Motor 3 HP Dimensions 125" x 48" Height 57".
Longitudinal Seam Welders
3 Results
6' Airline Engineering & Welding #FAL-10313, 6' arm length, 6' arm height, #A6543
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Longitudinal Seam Welders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Airline Engineering
Model: FAL-10313
Arm Length 6' Arm Height 72", Beta II Controls Hobart Mega-Arc 300 Arc Welding Power Source Boston Gear Variable Speed Drives Manual Roll Drop Alnor Pyrotroller Controller.
6' Jetline #CW5-72Z, 300 Amps, Jetline ALC-101-6 weld head, #A5466
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Longitudinal Seam Welders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Jetline
Model: CW5-72Z
Dimensions (W x D x H) Weld Head 104" x 60" x 103" DImensions (L x W x H) Circular Welder 144" x 44" x 64", Jetline ALC-101-6 Weld Head 300 Amp Miller Maxstar 300DX Power Source Bernard ...more
6.4' Airline Eng & Welding #FAL-11313, 77" x56", Airline Engineering Mega-Mig 450 RVS power source, #A6544
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Longitudinal Seam Welders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Airline Engineering
Model: FAL-11313
Arm Length 77" Max Height 56" Height With No Riser 32", Hobart Mega-MIG 450 RVS Welding Power Source Hobart 2000 Wire Feeder Variable Speed Control.
55 Ton, Chicago #68B, mechanical press brake, 8' overall, 78" between housing, 3" adj., motorized ram adj. w/ indicators, foot treadle, one shot lube, #A6604
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Mechanical Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Chicago
Model: 68B
Tonnage 55 Distance Between Housings 78" Ram Adjustment 3" Power Ram Adjustment Yes Ram Adjustment Indicators Yes Horsepower 3 H.P. Capacity (Mild Steel ) 14 Ga. x 8' Capacity (Mild ...more
135 Ton, Di-Acro #135-12, Hydra-Mechanical Press Brake, 12' overall, Automatic Back Gauge
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Mechanical Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Di-Acro
Model: 135-12
240 Ton, Steelweld #H3, 16' overall, 12" Shut Height, 18" throat, 22 SPM, power ram adj., automatic lube, #4273
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Mechanical Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Steelweld
Model: H3
Tonnage 240 Ton Tonnage at Mid Stroke 160 Shut Height 12" Throat 18" Thickness of Base Plate 3" Bed Width 7 1/8" Stroke Length 3 1/2" Strokes Per Minute 22 Backgauge No Safety Curtains No ...more
Molding Compression Hydraulic Presses
1 Result
50 Ton, Dayton #992, hydraulic molding press, 8 stroke, 8" daylight, 30" x 30" platen, #C5188
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Molding Compression Hydraulic Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Dayton
Model: 992
Platen Area 30x30 (762mm x762mm) Stroke 8 (203mm) Daylight 8 (203mm).
1/ 8" x 8 5/8" Amada Heavy Duty Corner Front & Rear Edge Notcher, #CSW-220, Foot Pedal, One - Shot Lube System, Blade Guard, Rear Coper Cutting Shear, Front Side Metal V Notcher, Timer, Work Guide, #**
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Notching Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Amada
Model: CSW-220
1/8" x 8-5/8" Amada #CSW-220, heavy duty corner front & rear edge notcher, one shot lube sys.,blade guard
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Notching Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Amada
Model: CSW-220
3/16" x 8-7/8" Boschert #LB12, hyd. notcher corner shear, 5 HP, emerg. stop, portable cart, electric foot pedal
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Notching Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Boschert
Model: LB12
1/4" x 8" x 8" Amada #CSH-220, hydraulic heavy duty notcher, work guide, 5 HP, one shot lube, #A6960
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Notching Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Amada
Model: CSH-220
1/4" x 8" x 8" Amada #CSH-220, hyd. notcher, 40 SPM, 20 ton, electric foot pedal, one shot lube, work guides
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Notching Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Amada
Model: CSH-220
Sterling Machinery Exchange has 5 more listings in Notching Machines.
Pandjiris, planisher, 15 ton, 9.75"-40" diameter, variable speed, dual foot pedal, 2001, #A5464
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Planishers
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Pandjiris
Year: 2001
Tonnage 15 Ton Capacity of Piece 9-3/4" ~40" Diameter Adjustable Planishing Force 2000 - 30,000 Lbs. Material Thickness.005 - 1/4" Mild Steel Variable Speed Range 5" - 120" IPM Required Air ...more
Plate and Frame Filter Presses
1 Result
Pacific Press #PFE135-2, 2 cu.ft., air pump, pressure gauge, 13 filter plates, 2017, #A6751
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Plate and Frame Filter Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Pacific
Model: PFE135-2
Year: 2017
Max Pressure 100/7300 CU. FT. 2, Air Pump Pressure Gauges Filters 13- Filter Plates.
Portable Gun Type Welders
1 Result
50 KVA Janda Portable Gun, beam arm, 300 weld Microprocessor, boom station, #A4015
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Portable Gun Type Welders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Janda
Model: PORTABLE GUN
KVA 50 Type Portable Style Gun Cycles 60 Maximum Water Temperature 68F Required Water Pressure 30 Lbs. Dimensions (L x W x H) 123" x 37" x 105", 300 Weld Microprocessor Controller ...more
250 Ton, Best Press #JC-148, hydraulic powder compacting press, 2853 hours, drawings & schematics, reconditioned, #A3846
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Powdered Metal Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Best
Model: JC-148
Year: 2000
Tonnage 250 Ton Upper Cylinder Stroke 15" d 14" d 10" Lower Cylinder Stroke 8" Feed Cylinder Stroke 12" d 1.5" d 1" Core Rod Cylinder Z4 d 4.0" d 2.5" Dimensions (L x W x D) Hydraulic ...more
Baileigh #MH-19, power hammer, 16 gauge mild steel capacity, 19" throat, solid hit hammer, foot pedal control, 0.177"-0.550" stroke length
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Hammers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: MH-19
Power Squaring Shears (Gauge)
12 Results
14 gauge x 8.4' Birmingham #H10014, deluxe hydraulic, (2)14" side gauges, 24" BG, 22 SPM, 5 HP, new, #SMH10014
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Gauge)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Birmingham
Model: H10014
Capacity Mild Steel 14 Ga. Stainless Steel 18 Ga. Type: Hydraulic Stokes Per Minute 22 Motor 5 HP Back Gauge Rear Operated Manual Backgauge Back Gauge Length 24" Front Gauge Length 24" ...more
12 gauge x 8' Amada #S-2532, 100" blade, 23 SPM, 12 holddowns, 27" front operated power back gauge w/ indicator
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Gauge)
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Amada
Model: S-2532
10 gauge x 4' National #NH5210, hydraulic, pilot operated pressure relief valve, 25 SPM, 5 HP, new, #SMNH5210
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Gauge)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: National
Model: NH5210
Capacity Mild Steel 10 Ga. Capacity Stainless Steel 14 Ga. Type: Hydraulic Back Gauge No Max. Cutting Length 52" Strokes Per Minute 25 Oil Capacity 24 Gal. Motor 3 Ph 460 Volt 1800 RPM ...more
10 gauge x 5' Betenbender #5-125, 36" front operated power back gauge, 4' squaring arm w/ inlaid scale, #A6083
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Gauge)
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Betenbender
Model: 5-125
About Betenbender Manufacturing, Inc.WELCOME --, If you're not already a customer of Betenbender Manufacturing, Inc. we welcome you as a future owner of an American made Betenbender ...more
10 gauge x 6' Cincinnati #135HS, 36" Back Gauge, fr operated prog digital micro computer, #A6219
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Gauge)
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Cincinnati
Model: 135HS
Capacity (mild steel) 10 Ga. Max. Cutting Length 72" Rake of Upper Blade 1/4" Number of Hold Downs (Hydraulic) 8 Hold Down Tonnage 3.5 Tons Back Gauge Range 36" Strokes Per Minute 60-85 ...more
Sterling Machinery Exchange has 7 more listings in Power Squaring Shears (Gauge).
Power Squaring Shears (Inch)
27 Results
3/16" x 10' Betenbender #10-3/16, hydraulic power squaring shear, hoses & fittings, #A6580
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Betenbender
Model: 10-3/16
Year: 1999
About Betenbender Manufacturing, Inc.WELCOME --, If you're not already a customer of Betenbender Manufacturing, Inc. we welcome you as a future owner of an American made Betenbender ...more
3/16" x 10' Betenbender #10'-1875, hydraulic low profile power squaring shear, 1" x 3" blade, 124" blade length, 4' squaring arm w/ inlaid scale
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Betenbender
Model: 10'-1875
About Betenbender Manufacturing, Inc.WELCOME --, If you're not already a customer of Betenbender Manufacturing, Inc. we welcome you as a future owner of an American made Betenbender ...more
3/16" x 10' Elga Hydrapower #10316, hydraulic shear, front operated power back gauge w/indicator, squaring arm, #9114
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Elga
Model: 10316
Capacity (mild steel) 3/16" Max. Cutting Length 120" Back Gauge Front Operated Power Back Gauge with Indicator Back Gauge Range 27" Throat 13 1/2" Type Hydraulic Number of Hold Downs ...more
1/4" x 10' Betenbender #10-250, 1" x4" x124" blade, 36" FOPBG w/ digital read out, 15 SPM, 19 holddown, 4' sq. arm, #A7096
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Betenbender
Model: 10-250
About Betenbender Manufacturing, Inc.WELCOME --, If you're not already a customer of Betenbender Manufacturing, Inc. we welcome you as a future owner of an American made Betenbender ...more
1/4" x 10' Cincinnati #1810G, heavy duty mechanical, front operated power back gauge w/indicator, 60 SPM, 7.5 HP, new, #SM1810G
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Power Squaring Shears (Inch)
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Cincinnati
Model: 1810G
Capacity (mild steel) 1/4" Horsepower 1 H.P. Type Mechanical Throat 4" Rake Angle 1/4" Strokes Per Minute 60 Back Gauge Front Operated Power Backgauge With Indicator Back Gauge Range 36" ...more
Sterling Machinery Exchange has 22 more listings in Power Squaring Shears (Inch).
Power Tank Turning Rolls
1 Result
500 lb. Custom, tank rolls, 32" x 17" x 37" idler rolls, controller, foot pedal, #A4376
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Power Tank Turning Rolls
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Model: A4376
Precision and Second Operation Lathes
11 Results
Acra #27AFL, 9" x10", second operation toolmakers lathe, Lever 5C Collet closer, 4000 RPM, 1 HP, new, #SM27AFL
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: -27AFL
Spindle Capacity w/ Chuck 5" Spindle w/ Expanding Collets 3" Spindle w/ Round 5C Collets 1-1/16" Spindle w/ Hexagon 5C Collets 7/8" Spindle w/ Square 5C Collets 3/4" Spindle w/ Step Chucks ...more
Acra #68EVS, 13" x14", 4000 RPM, 5C Lever Collet closer, 8-positions tool turret, new, #SM68EVS
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: -68EVS
Spindle Capacity With Chuck 6" Capacity w/ Expanding Collets 3" Capacity w/ Round 5C Collets 1-1/16" Capacity w/ Hexagon 5C Collets 7/8" Capacity w/ Square 5C Collets 3/4" Capacity w/ Step ...more
Acra #SET3280, 32"/44" x80" precision engine lathe, 20" 3-Jaw chuck, 4-way tool post, #5MT, 25 HP, new, #SMSET3280
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: SET3280
Capacity 32"/44" x 80" Swing Over Bed 32" Swing Over Cross Slide 23" Swing in Gap 44" Distance Between Centers 80" Bed Width 18" Spindle Nose A2-11 Spindle Bore 6" Taper of Spindle MT #5 ...more
Atrump #LD-1660, 16"/21" x 60" cap., precision, hardened & ground ways, 4-way tool post, 8.5 HP, new, #SMLD1660
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: LD-1660
Capacity 16"/21" x 60" Swing Over Bed 16" Swing Over Gap 21-3/4" Swing Over Cross Slide 9-1/2" Distance Between Centers 60". Bed Width of Bed Ways 10" Top Slide Travel 4" Cross Slide Travel ...more
Birmingham #HTL64120/W6, 64" x120" heavy duty precision, 39" 4-Jaw chuck, dead center, 30 HP, new, #SMHTL64120W6
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Precision and Second Operation Lathes
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Birmingham
Model: HTL64120/W6
Capacity 64" x 120" Swing Over Bed 32" Swing Over Cross Slide 49" Distance Between Centers 120" Max. Weight of Work Piece 13,200 Lbs. Width of Bed 29-3/4" Swing Over Cross Slide 22-1/2" ...more
Sterling Machinery Exchange has 6 more listings in Precision and Second Operation Lathes.
36" x .5" Herr Voss #36-4 1/2-11-3, precision leveler straightener, (11) 4.5" rolls, 25 HP, rebuilt 2007
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Precision Levelers
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Herr Voss
Model: 36-4
14 gauge x 12' Roto-Die #15-12, hydraulic bender brake, 3" stroke, 20-50 SPM, 7.5" die space, 2-1/8" die clearing, electric foot pedal, #A6943
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Press Brakes, Gauges
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Roto-Die
Model: 15-12
3/16" x 12' Betenbender #12-1875, hyd.low profile, 4' squaring arm, 2500 psi hyd.pressure, 10 HP, new, #SM121875
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Press Brakes, Inches
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Betenbender
Model: 12-1875
Betenbender 3/16" Hydraulic Shears, A precision cut doesn't happen by chance., It takes a shear that can make a razor-sharp cut time after time. Betenbender overdriven and ...more
1/4" x 10' Betenbender #10-250, hyd.self-compensating holddown bar assembly, 36" PBG, 15 HP, new, #SM10250
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Press Brakes, Inches
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Betenbender
Model: 10-250
About Betenbender Manufacturing, Inc.WELCOME --, If you're not already a customer of Betenbender Manufacturing, Inc. we welcome you as a future owner of an American made Betenbender ...more
Press Type Spot Welders
1 Result
7 KVA Rex #62FR, spot welder, #A4077
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Press Type Spot Welders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Rex
Model: 62FR
KVA Rating 7.5 KVA Throat 30" Open Height 8.5" Voltage 230V, 60CY, Foot Pedal Rocker Arms.
Ram (Die Sinker) EDM
2 Results
Acra #EDM1216, 28" x18" work table, 16" long., 12" cross, coolant system, 60 amp, new, #SMEDM1216
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ram (Die Sinker) EDM
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: EDM1216
Work Tank Capacity 44" x 24" x 16" Work Table Dimensions 28" x 18" Longitudinal Travel 16" Cross Travel 12" Spindle Travel 8" Headstock Travel 10" Amps 60 Input Rating 7 KVA Maximum ...more
Supertec #CNC330, CNC Die Sinker Electrical Discharge Machine, 3-axis, 40 amp, 12" x 10" capacity, 11.8" x 9.8" X & Y, 5.9" Z, 5.9" width, 29" x 20" x 14" work table,
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Category: Ram (Die Sinker) EDM
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Supertec
Model: CNC330
Reciprocating Surface Grinders - Horizontal Spindle
16 Results
6" x 12" Mitsui #MSG-200MH, PMC, 17" long, 8" cross, 8" x3/4" x1-1/4" wheel, coolant system, lubrication system, extra grinding wheels, used, #A5009
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Mitsui
Model: MSG-200MH
Capacity 6" x 12" Longitudinal Table Travel 17" Cross Table Travel 8" Table to Spindle Center 18" Height Under Wheel to Chuck 11" Grinding Wheel Size 8" x 3/4" x 1-1/4" Cross Feed per Rev. ...more
6" x 12" Webb #612, heavy duty, PMC, one shot lube system, #A4105
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Webb
Model: 612
Dimensions (W x D x H) 41" x 49" x 84" Weight 1,800 Lbs. Spindle to Top of Chuck 12", 6" x 12" Permanent Magenetic Chuck One Shot Lube System Made In Taiwan, Additional information:Note: ...more
6" x 18" Boyar-Schultz #H612, manual surface grinder, 8" x 3/4" x 1-1/4" wheel, electromagnetic chuck, manual lube, #C5221
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Boyar-Schultz
Model: H612
Maximum Grinding Wheel 8" x 3/4" x 1-1/4" Maximum Working Height from Table to Center of Spindle 11-3/4" Spindle Motor 1 HP, Electromagnetic Chuck Manual Lube System.
6" x 18" Chevalier #FSG-2A618, semi-auto surface grinder, 8" x1/2" x1-1/4" wheel, 16-82 FPM, electromagnetic chuck, coolant, #A7053
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Chevalier
Model: FSG-2A618
6" x 18" Chevalier #FSG-2A618, fully automatic precision hydraulic, 2-Axis, 16-82 FPM, 3.3 HP, new, #SMFSG2A618
Sterling Machinery Exchange - New Mach. | South El Monte, CA | Adam Mattes |
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Chevalier
Model: FSG-2A618
Table Size 6" x 18" Max. Grinding Length 18" Max. Grinding Width 6" Max. Distance From Table Surface to Spindle Centerline 18" Longitudinal Movement of Table. Hydraulic 19-3/4" Manual 20" ...more
Sterling Machinery Exchange has 11 more listings in Reciprocating Surface Grinders - Horizontal Spindle.
Right Angle T Engine Lathes
1 Result
60" Lodge & Shipley #T60, right angle T lathe, hydraulic tracer unit, #A5152
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Right Angle T Engine Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Lodge & Shipley
Model: T60
Swing in Gap 60" Carriage Travel 52.5" Compound Travel 16" Hole Thru Spindle 11-1/2" Distance Face Plate to Carriage 16" Distance Face Plate to Compound 4.13" - 20.5" Spindle Speeds (24) 4 ...more
May Tool #MTC-72H, circle shear, 3/16" x 6', Sabina DC variable speed drive, 1998, #A6559
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Ring and Circle Shears
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: May Tool
Model: MTC-72H
Year: 1998
Capacity (mild steel) 3/16" Capacity (Stainless Steel) 10 Ga. Cutting Diameter 6"- 72" Head Throat 24" Tailstock Throat 52 1/2" Cutter Speed (Variable) 0- 350 RPM Dimensions (LxWxH) 110" x ...more
Eckold #HSP900/20, 36" throat, 12"-21" vertical height, dual palm Control, foot pedal, 2001, #A2145
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Riveters
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Eckold
Model: HSP900/20
Year: 2001
Throat 36" Vertical Height 12" ~ 21" Dimensions (W x D x H) 87" x 60" x 94" Stroke 0 - 5", Dual Palm Control Foot Pedal Adjustable Stroke, Additional information:The HSP 900/20 is a ...more
Rocker Arm Welders
5 Results
15 KVA Acme #1-16-15, spot welder (rocker arm type), 16" arm length, water cooled, hoses, foot pedal, power cord, #A6474
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Rocker Arm Welders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Acme
Model: 1-16-15
KVA 15 KVA Arm Length 16", Water Cooled Hoses Foot Pedal Power Cord.
50 KVA Standard #AR3-30-50, 33" throat, Janda 105 Microprocessor, foot pedal, #A6222
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Rocker Arm Welders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Standard
Model: AR3-30-50
KVA 50 KVA Throat 33" Electric 208 Volt Dimensions (L x W x H) 67" x 41" x 73", Janda 105 Microprocessor Control Unitrol Soft Touch System Foot Pedal.
75 KVA Sciaky #RMC01STQ-75-36-10, spot welder, Solid State control system, #A3754
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Rocker Arm Welders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Sciaky
Model: RMC01STQ-75-36-10
KVA 75 Throat 36' Gap (Adjustable) 10' Stroke 4 1/2", Foot Pedal.
100 KVA Acme #3-24-100, spot welder, 24" throat, parts machine, Entron Control, foot pedal, #A5914
Sterling Machinery Exchange | South El Monte, CA | Adam Mattes |
Category: Rocker Arm Welders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Acme
Model: 3-24-100
KVA 100 Throat 24" Max. Arm Clearance 9" Voltage 460v, 1 Phase Dimensions ( L x W x H) 64" x 32" x 62", Damaged Entron Control Foot Pedal.
