Stanley Machinery Corp
Contact
About
Whether you are using a LANDIS Threading Machine to hollow mill, cut or roll, thread pipe, bolt, rod, do straight or tapered threads, etc, LANDIS Threading Machines are here, IN STOCK, and are ready to perform. We have trucks in and out of here all of the time. LANDIS machines, when set up correctly, are nearly unstoppable. LANDIS Machines just won't slow you down when operated as intended. Better yet, when or if you are finished using your machine(s) and would care to sell or trade up, Stanley Machinery is ready to work with you. ~ Stan CohenProducts & Services
- Bolt & Nut Machinery
- Drills
- Grinders
- Grinders, Centerless
- Lapping Machines
- Milling Machinery
- Pipe Threaders
- Rollers, Thread
- Tube Machinery & Mills
Associations & Affiliations
46 listings in 27 categories
52" Timesavers (for wood), #252-2, dual heads, 40 HP & 30 HP, excellent cond, 1990' s
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Belt Sanders
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Timesavers
Model: 252-2
Landis, 5/8", 1", 2", 2-1/2", 4", 6", 8", 12", 16", 20", 300+ machines in stock, inspect u/power
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Bolt Threaders
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Landis
Landis #6C, 8C, 12C, 16, 20, 32C, 48C, 300+ machines in stock, inspect under power
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Bolt Threaders
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Landis
Model: 6C
Van Norman No. 1C, infeed attachment, crush dresser
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Centerless Grinders
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Van Norman
Coil Cradles and Straighteners
1 Result
Aida #LM3032, 12" x .120", combination coil cradle & straightener, 1980' s
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Coil Cradles and Straighteners
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Aida
Model: LM3032
1/4" Roy, DSSD, vari-drive
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Cold Headers
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Roy
Thielenhaus CAB, CNC, continuous abrasive belt, microfinisher, mint, amazing, few hours, 2000
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Crankshaft Grinders
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Thielenhaus
Year: 2000
Continental #3A, pneu.feed, work rest w/set of rolls, cast iron, pipe stops, (3 available) each
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Cut Off Machines
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Continental
Model: 3A
Landis, pneu.rotary blade cut off, work stop, 5HP hi eff, 3 ea.blades, air filter, oiler
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Cut Off Machines
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Landis
Acme-Fette #N-4, die head, 9/16" to 1-1/4", 3 die, flange mount, w/set of dies
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Die Heads
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Acme-Fette
Model: N-4
Duplex Milling Machines - Horizontal
1 Result
Nichols, plain, rise & fall hds, ball screw, attachments, manu in stock, IUP, late
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Duplex Milling Machines - Horizontal
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Nichols
Finishing Machines
2 Results
Hegenscheidt #7489, vertical centerless roller finishing machine, IUP, excellent
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Finishing Machines
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Hegenscheidt
Model: 7489
Thielenhaus CAB, CNC, continuous abrasive belt, microfinisher, mint, amazing, few hours, 2000
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Finishing Machines
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Thielenhaus
Year: 2000
Fellows #3X72, 73" cap., factory blt, w/extra length, 82-3/4" table, full table fixt., excellent
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Gear Rack Shapers
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Fellows
Model: 3X72
Grinding Spindles
1 Result
Heald, 24"/28" ID, 7500 RPM, rebuilt by Lumley Spindle Service, style 145-4
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Grinding Spindles
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Heald
Wilson Rockwell, extra weights, tables, pressure plates, diamonds, cover, more, as new
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Hardness Testers
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Wilson Rockwell
630/800 Ton, Sack & Kiesselbach #PP630FS, 20 ton eject & retract, high speed
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Hobbing Presses
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Sack & Kiesselbach
Model: PP630FS
Greenard #HP-10-C, hydraulic utility press, 21-1/2" stroke, 7-1/2" throat, 5 HP
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Hydraulic Presses
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Greenard
Model: HP-10-C
MODEL-HP-10-C, 5 Hp, 208/220/440V, 7 1/2" Throat, 21 1/2" Stroke.
Heald #472, Special ID, may be world' s best/biggest capacity, lg.stroke, P & W air surp.xtra spindles
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Internal Grinders
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Heald
Model: 472
Lappers Lapping Machines
5 Results
20" & 16" DoAll #CM, double sided, pin type drives, tooling, mint, 1980' s (4 in stock)
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Lappers Lapping Machines
Seller: Stanley Machinery Corp
Location: Agawam, MA
Model: CM
24" Peter Wolters Honer #AL1H, dresser, Millitron,,IUP, factory update approx.1990
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Lappers Lapping Machines
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Peter Wolters
Model: AL1H
26" Norton #26, Hydrolap, double sided, as late as 1970 (18 available)
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Lappers Lapping Machines
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Norton
Model: 26
30" Hahn & Kolb, double sided, new probe, new Sony DRO' s, 3 wheel machine, rebuilt, excellent
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Lappers Lapping Machines
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Hahn & Kolb
44" Micromatic #Hydrolap, 15.5" ring ID, double sided, dresser, pin type drive
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Lappers Lapping Machines
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Micromatic
Model: HYDROLAP
Marking Machines (Including Laser Markers)
4 Results
Schmidt #175 marker, all sizes, tooling, test u/power, (2) each w/huge capacity, 1980' s
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Schmidt
Model: 175
Schmidt #175-6, 18" x 24" opening
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Schmidt
Model: 175-6
Schmidt #175-12, 27" x 35" opening
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Schmidt
Model: 175-12
Schmidt #660, pneumatic marking machine, tool holder, like new, 1996
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Schmidt
Model: 660
Year: 1996
6" Landis, lead screw, will tap all sizes up to 6", many solid taps incl.up to 6"
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Nut Tappers
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Landis
Pipe Threaders (Includes Nipple Machines, Pipe and Tube Cutters)
4 Results
1/4", 2", 4", 6" Nipple threaders, single & double spindle
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Seller: Stanley Machinery Corp
Location: Agawam, MA
8-5/8" Harley, leadscrew, hardways, like Landis, for API work, 1981 (2 available)
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Harley
18"/20" Landis, die head only
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Landis
20" Landis, 25 HP, power carriage travel, complete cross rail, internally cooled head (2 available)
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Landis
5' -11" Cincinnati Bickford #Super-Service, univ.box table, 5 HP, like new, 1960
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Radial Drills
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Cincinnati
Model: SUPER-SERVICE
Year: 1960
Rotary Table Surface Grinders - Horizontal Spindle
3 Results
Arter /CentroMetalCut, 12", Air Force surplus, still bolted to skid, brand new
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Arter
Model: CENTROMETALCUT
Heald Cincinnati Milacron #161, 8" grinder, excellent condition
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Heald
Model: 161
Taft-Pierce, 6", tilting head, fine feed, electromagnetic chuck, tilting chuck, excellent
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Taft-Pierce
Simplex Milling Machines - Horizontal
1 Result
Kearney & Trecker #1224, complete, 3 hp, 5 HP, 7-1/2 HP, all US built, late as 1979 (6) in stock
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Simplex Milling Machines - Horizontal
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Kearney & Trecker
Model: 1224
Supfina #SM-95-50, 18" x 50", (2) each oscillating heads, from Aircraft, updated
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Superfinishers
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Supfina
Model: SM-95-50
Thielenhaus #SF125, thru feed, 8 each heads, will take 10 heads, like new, 1999
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Superfinishers
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Thielenhaus
Model: SF125
Year: 1999
Thielenhaus CAB, continuous abrasive belt, microfinisher, CNC, few hours, 2000
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Superfinishers
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Thielenhaus
Year: 2000
Kinefac #MC5F, 2 die horizontal, hydraulic, extra options available, excellent, late as 1979
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Thread Rollers
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Kinefac
Model: MC-5F
Kinefac #MC6F, 3 die vertical, tooling, like brand new, (2) each in stock, 1990' s, inspect under power
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Thread Rollers
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Kinefac
Model: MC-6F
Reid, 2 die horizontal, 27 ton, 10 sets of dies, 1988
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Thread Rollers
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Reid
Year: 1988
Tube End Finishing and Forming Machines
1 Result
1/4" -2" Torrington Vaill #220, end forming machine, 4" stroke, air operated, 110V. 1 phase
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Torrington
Model: 220
Vertical Double End Opposed Grinders
1 Result
Gardner #2V18-24, gaging, dresser, coolant, adj.drives, excellent, rebuilt, IUP
Stanley Machinery Corp | Agawam, MA | Stan Cohen |
Category: Vertical Double End Opposed Grinders
Seller: Stanley Machinery Corp
Location: Agawam, MA
Mfr: Gardner
Model: 2V18-24
