Soberay & Sons Ltd
Cleveland, OH 44102-4431
Silver Level Dealer
Surplus Record Dealer Since 2012
Contact
About
Soberay and Sons - One of the most capable and dependable suppliers of rubber processing machinery in the world. Our family has served the industry over 70 years and three generations. Our sterling reputation for quality rebuilds and dependable used equipment is based on years of service. Through superior knowledge and experience, we have earned your confidence. We are one of the leading liquidators of tire plants and equipment in the World.Products & Services
- Automotive Equipment
- Plastic Equipment
- Tooling & Accessories
Associations & Affiliations
323 listings in 42 categories
2 Roll Plastic Rubber Mills
5 Results
8" x 16" Farrel, Two-Roll Rubber Lab Mill, (2) 10 HP motors, 220/440 Volt
Category: 2 Roll Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Item 2021-2 - One (1) Used Farrel Lab Mill, 8 x 16" (200 x 400) rolls, cabinet style, under-slung drive, individual drives, gear driven, flip up guides, (2) 10 HP 220/440 VAC brake motors, variable speed, push button controls, mechanical nip adjustment, OSHA knee safety, cored rolls for heating/cooling rolls.
16" x 36" Bolling, 2-roll silicone mill, AC motor with VFD, direct drive, unitized base
Category: 2 Roll Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bolling
One (1) Used Bolling 16 x 36 (400 x 915) Silicone Mill, AC motor with VFD, Falk gearbox, direct drive, unitized base, modern ABB drive, pull cord safety on the front and back rolls, manual nip adjustment, nylon guides, scraper blade rear roll, grease lubrication.
16" x 42" Farrel, 2-Roll Rubber Mill, 75 HP @ 705 RPM Reliance motor, Philadelphia gearbox, 35:1 ratio, 480 VAC
Category: 2 Roll Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Item 2036 - One (1) Used Farrel 16" x 42" 2-Roll Rubber Mill, Reliance motor 75 HP, 705 RPM, 480 VAC, Philadephia 35:1 gearbox model 228HOP-2, direct drive, connecting gears, unitized base, top cap design, full circle bronze bushings with automatic Trabon lubrication, manual nip adjustment, pneumatic safety brake.
21" x 36" Kobe, 2-roll rubber mixing mill, 125 HP DC, direct drive, roller bearings, 1980
Category: 2 Roll Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Kobe
Year: 1980
One (1) Used Kobe 21" x 36" (533 x 914) Rubber Mill, MILL BODY ONLY, friction ratio between rolls 1.04:1 via 26/27 tooth connecting gears, roller bearings, no base, year 1980, S/N 790031 & 790032, rubber mixing mill.
28" x 28" x 100" Farrel, 2-roll roller bearing rubber mixing mill, 100 HP, direct drive
Category: 2 Roll Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Used Farrel 28x28x100" single mill, rubber_mixing_mill, ROLLER BEARING, anti-friction bearing, individual 100 HP AC Vector variable frequency / variable speed drives 1785 RPM with 169:1 reduction ratio gearboxes, roll speed 7 to 73 FPM, direct drive, unitized base, top cap design, motorized nip adjustment, 4" ...more
Monsanto Flexsys #RPA2000, rubber process analyzer, 120 V., 15 amps
Category: Analyzer
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Monsanto Flexsys
Model: RPA2000
One (1) Used Monsanto Flexsys RPA 2000 83064 Rubber Process Analyzer. S/N: 90AIF2092. 120 Volts, 15 AMPS, 50/60HZ, software and computer not available, S/N 90AIF2092.
Journal box housing, Farrel, 17" bearing, 25" window height (2 available)
Category: Ball & Roller Bearings
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Two (2) Used Farrel Journal Box Housings, 17" bearing, 25" window height.
Journal box housing, Farrel, 17" bearing, 23" window height (2 available)
Category: Ball & Roller Bearings
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Two (2) Used Farrel Journal Box Housings, 17" bearing, 23" window height.
34" wide Intralox, Extruder Feed Conveyor, pneumatic wig-wag w/ 36" wide idler rolls at discharge, (3 available)
Category: Belt Conveyors
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Intralox
Item 4723 - One (1) Used Intralox inclined feed conveyor, rubber slab loader, 34" wide belt, pneumatic hold down roller, pneumatic wig-wag with 36" wide idler rolls at discharge, complete with operator interface and pneumatic package, previously used to feed rubber slabs to a 6" cold feed extruder.
1 Ton, Edwards #CF-0200-A, liquid chiller, 250-400 psi, R-12 refrigerant, 7475 BTUH
Category: Chillers
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Edwards
Model: CF-0200-A
One (1) Used Edwards Liquid Chiller, 1-Ton, Model CF-0200-A, 208/230 VAC, 250-400 PSI, Refrigerant R-12, Charge 4 LBS, 7475 BTUH, S/N 925922.
2" Boschert Bosch chuck for wind up let off
Category: Collet Chucks
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Boschert
One (1) Used Boschert Bosch 2" Chuck for wind-up let-off.
Joh. Peter Falter Joh Peter Falter, 48" shear cutter, with pull roll, 3 HP drive
Category: Cutters
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Joh. Peter Falter
Item 9065 - One (1) Used Joh. Peter Falter (Germany) shear cutter, 48" x 1/4" thick max material cut, pull roll included, 3 HP drive.
Spadone, 48" automatic splicer
Category: Cutters
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Spadone
One (1) Used Spadone 48" Automatic Splicer, previously used with a Spadone bias cutter.
Die Cutting Press Machines
2 Results
18 Ton, Herman Schwabe #DF, Clicker Press, Dual Safety Style
Category: Die Cutting Press Machines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Herman Schwabe
Model: DF
Item 3199-3 - One (1) Used Schwabe 18 Ton Clicker Press, Model DF, Video Link: https://youtu.be/53w2dwefpk0.
25 Ton, Herman Schwabe #D, Clicker Press, Dual Safety Style
Category: Die Cutting Press Machines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Herman Schwabe
Model: D
Item 3199-5 - One (1) Used Schwabe 25 Ton Clicker Press, Model D, Video Link: https://youtu.be/ufZyQpBMZFQ.
Extruder Line Parts & Accessories
22 Results
Berstorff, Pin Barrel for 6" Cold Feed Rubber Extruder, 20:1 L/D
Category: Extruder Line Parts & Accessories
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Berstorff
Item 6455 - One (1) NEW Spare Pin Barrel for Berstorff 150mm 20:1 L/D cold feed pin barrel rubber extruder.
Davis Standard, Feed Section for 6" Rubber Extruder, (2 available)
Category: Extruder Line Parts & Accessories
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Item 6412-95 - One (1) Used Feed Section for Davis Standard 6" Rubber Extruder.
Davis Standard, Extruder Screw, 3.5" screw diameter, 20:1 L/D ratio, left hand rotation
Category: Extruder Line Parts & Accessories
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Item 6266 - One (1) REBUILT NFM 6.0" 150mm CFPBE Pin Barrel Rubber Extruder, 14:1 L/D, 250 HP 1150 RPM 500 VDC motor, 41.46:1 gearbox ratio, variable straight delivery head, pneumatic head clamp assembly, forced lube system, PFR power feed roll external bearings and adjustable scraper blade, date 2016, S/N ...more
Davis Standard, Gearbox for 2.5" Cold Feed Rubber Extruder, 104 HP, 17.26:1 gear ratio
Category: Extruder Line Parts & Accessories
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Item 6410-2 - One (1) Used Gearbox for Davis Standard 2.5" Cold Feed Rubber Extruder, PFR power feed roll type, 17.26:1 G/B ratio, model 250S, SN G-3077, 104 HP Capacity.
Davis Standard, Feed Section for 4.5" Rubber Extruder
Category: Extruder Line Parts & Accessories
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Item 6412-5 - One (1) Used Feed Section for Davis Standard 3.5" Rubber Extruder.
Soberay & Sons Ltd has 17 more
listings in Extruder Line Parts & Accessories.
Extruders
18 Results
1.5" Davis Standard, Cold Feed Rubber Extruder, 10 HP, 1775 RPM, power feed roll, adjustable scraper blade, 12:1 L/D, 460 Volt, (2 available)
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Item 6006-1 - One (1) DS Davis Standard 1.5" 38mm Cold Feed Rubber Extruder, 12:1 L/D, 17.56:1 G/B ratio, Marathon 10 HP 1775 RPM 460 VAC motor, clamp assembly, forced lube system, PFR power feed roll external bearings with adjustable scraper blade.
2.5" Emerson #SM100HF, Cold Feed Rubber Extruder, 12:1 L/D ratio, power feed roll, 15 HP Toyo motor, 1250 RPM, 460 Volts
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Emerson
Model: SM100HF
Item 6010 - One (1) Emerson EMR 2.5" 60mm Cold Feed Rubber Extruder, EM Engineering Model SM100HF, 12:1 L/D, 25:1 G/B ratio, Toyo 15 HP 1250 RPM 460 VDC motor, forced lube system, PFR power feed roll external bearings and adjustable scraper blade.
3.5" Nakata #CFPBE, Pin Barrel Extruder, 14:1 L/D, (3 available)
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nakata
Model: CFPBE
Item 6230 - One (1) Used Nakata 90mm CFPBE Pin Barrel Rubber Extruder, 14:1 L/D, gearbox ratio 17.4:1, GE 60 HP 1150 RPM 500 VDC motor, straight delivery head, forced lube system, PFR power feed roll external bearings and adjustable scraper blade.
3.5" NFM, Cold Feed Rubber Extruder, 16:1 L/D, power feed roll
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nakata Zoki
Item 6048 - One (1) Used Nakata 90mm CFE Cold Feed Rubber Extruder, 16:1 L/D, no motor, straight delivery head with clamp assembly, forced lube system, PFR power feed roll external bearings and adjustable scraper blade.
4.5" Nakata #CFPBE, Pin Barrel Rubber Extruder, 16:1 L/D, 150 HP Reliance motor, 460 VAC, (2 available)
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nakata
Model: CFPBE
Item 6250 - One (1) Used Nakata 4.5" 120mm CFPBE Pin Barrel Rubber Extruder, 16:1 L/D, no motor, no head, forced lube system, PFR power feed roll external bearings and adjustable scraper blade.
Soberay & Sons Ltd has 13 more
listings in Extruders.
Extruders and Extrusion Lines
37 Results
1.25" Davis Standard #DS-125, plastic extruder, 24:1 L/D, 15:1 G/B ratio, 5 HP DC motor, 1991
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Model: DS-125
Year: 1991
Item 6519 - One (1) Used 1.25" 32mm Plastic Extruder, Model DS-125, 24:1 L/D ratio, 5 HP DC Motor, Gearbox ratio 15:1, S/N L8345, Date 1991.
1.5" Davis Standard, Duplex Hose Extrusion Line, (2) cold feed rubber extruders, (2) 10 HP motors, 1775 RPM, 12:1 L/D, integrated VFD drives, central control panel, 460 Volt
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Item 6005-3 - One (1) DS Davis Standard 1.5" x 1.5" Duplex Hose Line, Cold Feed Rubber Extruders, 12:1 L/D, 17.56:1 G/B ratio, Marathon 10 HP 1775 RPM 460 VAC motor, duplex head, clamp assembly, integrated VFD and control panel, forced lube system, PFR power feed roll external bearings with adjustable ...more
1.5" UFS United Feed Screws, cold feed rubber extruder, 20:1 L/D, 14.5:1 G/B ratio, forced lube system
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: United Feed Screws
Item 6006-1 - One (1) UFS United Feed Screws 1.5" 38mm Cold Feed Rubber Extruder, 20:1 L/D, 14.5:1 G/B ratio, Siemens 20 HP 1755 RPM 460 VAC motor, AC VFD variable frequency drive, control panel, clamp assembly, forced lube system, individually driven roller feeder assembly, feed roller external bearings and ...more
2" Royle, cold feed rubber extruder, 12:1 L/D, 15:1 G/B ratio, forced lube system, straight delivery head
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Royle
Item 6008 - One (1) Royle 2.0" 50mm Cold Feed Rubber Extruder, 12:1 L/D, 15:1 G/B ratio, No motor, Reliance 15 HP 460 VAC drive with controls, straight delivery head, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
2" Sterling plastic extruder, 24:1 L/D, 25 HP, 1750 RPM, 240 VAC motor
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Sterling
Item 6524 - One (1) Used Sterling 2" 50mm Plastic Extruder, 24:1 L/D, 25 HP 1750 RPM 240 VAC motor.
Soberay & Sons Ltd has 32 more
listings in Extruders and Extrusion Lines.
Extrusion Dies
1 Result
RMS roller die head, single roll roller die, 23" roll face, 12" dia roll
Category: Extrusion Dies
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Rms
One (1) Used RMS Roller die head, single roll roller die, 6" ID inlet mating with extruder, 23" roll face, approximately 20" usable surface, 12" diameter roll.
Gear Reducers, With Driving Unit
1 Result
1000 HP @ 900 RPM, Lufkin #D890AH Unidrive double reduction horiz par shaft, 21.85:1 ratio
Category: Gear Reducers, With Driving Unit
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Lufkin
One (1) Used Lufkin model D890AH double reduction horizontal parallel shaft mixer speed reducer, arrangement R-LL, 21.85:1 reduction ratio, 1882 HP Catalog Rating, Service Rating 1,000 HP @ 900 RPM with 1.75:1 Service Factor. This unit is complete with anti-friction type roller bearings on all shafts, includes dual ...more
Gearboxes (Gear Reducers - No Driving Unit)
32 Results
115 HP @ 1750 RPM, Falk #2100Y83-3, gearbox reducer, parallet shaft, 36.44:1 ratio
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Falk
Model: 2100Y83-3
One (1) Used Falk Model 2100Y83-3 Gearbox Reducer, 60 HP service rating, 36.44:1 reduction ratio, 1.92 SF service factor, 115 HP catalog rating, 1750 RPM input speed.
139 HP @ 870 RPM, D.O. James #270HS, gearbox reducer, parrallel shaft, 9.07:1 ratio
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: D.o. James
Model: 270HS
One (1) Used D.O James Gear Model 270HS Gearbox Reducer, 139 HP service rating, 9.07:1 reduction ratio, 1.0 SF service factor, 139 HP catalog rating, 870 RPM input speed.
150 HP @ 720 RPM, Lufkin gearbox reducer, parallel shaft, 35.00 :1 ratio
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Lufkin
One (1) Used Lufkin Gearbox Reducer, 150 HP service rating, 35:1 reduction ratio, 1.5 SF service factor, 225 HP catalog rating, 720 RPM input speed.
150 HP, Dominion parallel shaft gearbox reducer, 11.00 :1 ratio
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Dominion
One (1) Used_Dominion_Gearbox_Reducer 150 HP, 11:1 ratio, previously used on a 22x20x60, the output shaft has a 31 tooth pinion.
150 HP, Farrel parallel shaft gearbox reducer, 38.70 :1 reduction ratio
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Used Farrel gearbox, 151 HP, 38.7:1 reduction ratio, size DR-33, input 1200 RPM.
Soberay & Sons Ltd has 27 more
listings in Gearboxes (Gear Reducers - No Driving Unit).
Mitts & Merrill Hog Mill, 5/8" screen, 150 HP, 895 RPM, mounted in unitized base
Category: Hog Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Mitts & Merrill
One (1) Used Mitts & Merrill Hog Grinder, 5/8" screen, hog mill, 150 HP, 895 RPM, 460 VAC motor, belt drive, control panel, mounted on unitized base.
5 HP Parker Hannifin hydraulic unit, 230/460 V., Sperry Vickers pump & valves
Category: Hydraulic Power Units
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Parker
One (1) Used Parker Hannifin Hydraulic Unit, Power Unit Division, 5 HP 230/460V motor, Sperry Vickers pump and direction valves.
30 Ton, PHI, hydraulic press, 12.5" x 9.5", 8" daylight, 2 electric platens, water cooled, hand pump type
Category: Hydraulic Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Phi
Item 3027 - One (1) Used PHI 12.5" x 9.5" press, Model PW-220, 20 ton, 8" daylight between platens, (2) 1500W electric platens, 600F max temp, hand pump type, dimensions 28x24x33"H, weight 465 LBS.
30 Ton, Wabash #30-1212-4STMBX, 4-Post Hydraulic Lab Press, 12" x 12" steam heated/water cooled platens, adjustable daylight
Category: Hydraulic Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Wabash
Model: 30-1212-4STMBX
Item 3028 One (1) Used Wabash Hydraulic Lab Press, model 30-1212-4STMBX, 12" x 12" platens, 30 Ton, steam heated / water cooled, individual controls, adjustable daylight, self-contained hydraulic unit, 4-post type, self contained hydraulic unit.
400 Ton, TMP, slab side hydrualic press, 24" x 28", 12" daylight, 12" stroke, electric platen
Category: Hydraulic Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Tmp
One (1) Used TMP 24" x 28" press, 400 ton, 12" daylight_between_platens, 12" stroke, electric platena, incomplete self contained hydraulic unit, incomplete controls.
850 Ton, TMP French Oil, hydraulic press, 30" x 30", 24" daylight, 24" stroke, electric platens
Category: Hydraulic Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: French Oil
One (1) Used TMP 30" x 30" press, 850 ton, 24" daylight between platens, 24" stroke, electric platens, incomplete self contained hydraulic_unit_incomplete_controls.
1000 Ton, Eemco, hydraulic press, 40" stroke, 40" daylight, 42" x 42", (2) steam platens
Category: Hydraulic Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Eemco
Item 3108 - One (1) Used Eemco 42" x 42" press, 1000 ton, 40" daylight between platens, 40" stroke, (2) steam platens.
Soberay & Sons Ltd has 2 more
listings in Hydraulic Presses.
Bolling #OM, lab mixer, 2.6 lb. capacity, jacketed mixing chamber, cored rotors, feed hopper
Category: Lab Mixers
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bolling
Model: OM
One (1) Used_Bolling_Lab_Banbury_Mixer, 1.6 liter, 2.6 lb.capacity, 96 cu. in net volume of mixer chamber, jacketed mixing chamber, cored rotors, feed hopper, pneumatically operated ram with floating weight, slide door discharge, right angle gearbox, mounted on base.
Farrel #BR, lab mixer, 2.6 lb. capacity, jacketed mixing chamber, cored rotors, feed hopper, 25 HP
Category: Lab Mixers
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Model: BR
One (1) Used Farrel Laboratory BR Banbury Mixer, S/N 65A4417, with 2.6 Lb. Capacity, 96 Cu. In Net Volume of Mixer Chamber, Jacketed Mixing Chamber, Cored Rotors, Feed Hopper, Pneumatically Operated Ram with Floating Weight, Chrome Plated Body, 25 hp, 480 Volt, 4-Speed Motor with Panel, Machine Is Cabinet Style ...more
Farrel, Banbury #Midget, lab mixer,.50 lb.capacity, internal mixer, jacketed mixing chamber
Category: Lab Mixers
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Model: MIDGET
Item 1001 - One (1) Used Farrel Midget Lab Banbury Rubber Mixer, 0.50 liter chamber. Approx 1lb batch, internal mixer, jacketed mixing chamber for temperature control, cored rotors, feed hopper, pneumatically operated ram with floating weight, chrome plated body, 4 HP 1200/600 RPM 220/440VAC variable speed motor ...more
Farrel #OOC, lab mixer, 8 lb., 8" x6" feed, free standing GE DC drive cabinet w/operator controls, 40 HP
Category: Lab Mixers
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Model: OOC
One (1) Used Farrel OOC 8 Lb. Banbury Mixer, S/N 85A 1209, with 8Lb @ Specific Gravity of 1 Batch Capacity, 8" x 6" Feed, Free Standing GE DC Drive Cabinet with Operators Controls, GE Motor 40 hp DC Variable Speed, 480 Volt, 0 - 1,750 rpm, Types of Material Ran: Silicone Rubber, All Mounted On Steel ...more
Farrel #OOC, lab mixer, 4 lb. rubber capacity, jacketed mixing chamber, cored rotors, feed hopper
Category: Lab Mixers
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Model: OOC
One (1) Used Farrel Banbury OOC Lab Mixer, rubber mixer, 4.6 liter chamber, 4 lb. rubber capacity, jacketed mixing chamber, cored rotors, feed hopper, pneumatically operated ram with floating weight, chrome plated body, 30 / 15 HP 2-speed 440 VAC motor, 125 / 62.5 RPM rotors, machine is cabinet style design, assembled ...more
Soberay & Sons Ltd has 1 more
listing in Lab Mixers.
20 Ton, PHI #PW-210, lab press, hand pump type, 8" x 8", 8" DL, 600°F
Category: Lab Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Phi
Model: PW-210
Item 3022 - One (1) Used PHI 8" x 8" press, Model PW-210, 20 ton, 8" daylight between platens, (2) 800W electric platens, 600F max temp, hand pump type, dimensions 28x16x33"H, weight 340 LBS.
20 Ton, PHI, Lab Press, Self-Contained Style, 14" x 12" Platens, (2) Adjustable Daylights
Category: Lab Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Phi
Item 3034-1 One (1) Used PHI Lab Press, 14" x 12" platens, 20 Ton, electric platens, individual controls, (2) adjustable daylights, self contained hydraulic unit, slab side type.
30 Ton, Wabash, Hydraulic Lab Press, 4-post, 15" x 12" platen, 12"-22" adjustable daylight
Category: Lab Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Wabash
Item 3038-1 One (1) Used Wabash Lab Press, 15" x 12" mounting plates, 30 Ton, individual controls, adjustable daylight 12-22", self contained hydraulic unit, 4-post type. Video Link: https://youtu.be/PK3nk3Vmtfs.
Laboratory Mills
3 Results
Eemco, rubber lab mill, 6x13" rolls, cabinet style, under slung drive, belt driven, 7.5 HP
Category: Laboratory Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Eemco
One (1) Used Eemco Lab Mill, 6 x 13" (150 x 330) rolls, cabinet style, under_slung_drive, belt driven, flip up guides, 7.5 HP 440 VAC brake motor, variable speed, push button controls, knee and overhead pull cradle safety, 40" x 42" x 55"H.
Farrel, 6" x 13" rolls, Lab Mill, cabinet style, under slung drive, belt driven, 7.5 HP
Category: Laboratory Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Item 2016 - One (1) Rebuilt Farrel Lab Mill, 6 x 13" (150 x 330) rolls, cabinet style, under-slung drive, belt driven, flip up guides, 7.5 HP motor and drive, push button controls with START / STOP / REVERSE, knee and overhead safety, 16 week delivery.
Farrel, rubber lab mill, 8 x 16" rolls, cabinet style, under slung dual drive, belt driven, dual 10 HP brake motors
Category: Laboratory Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Item 2021-1 - One (1) Used Farrel Rubber Lab Mill, 8 x 16" (200 x 400) rolls, cabinet style, under-slung DUAL DRIVE, individual drive, belt driven, flip up guides, dual 10 HP 220/440 VAC brake motors, variable speed, push button controls, SS rotary unions for heating/cooling rolls, mechanical nip adjustment, knee and ...more
Marking Machines (Including Laser Markers)
1 Result
4JET #T-Mark-1600 Tire Tyre marking system, compact design, never installed, 2008
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Jet
Model: T-MARK-1600
Year: 2008
One (1) New 4JET Laser Tire Tyre Engraving Machine, Model T-MARK 1600 Tire Marking System, compact design, capacity for tire sizes a with diameter of 26-49" (650-1250mm) and width of 6-19" (150-500mm), capable of engraving of letters, numbers and graphic images of different sizes, safe operation due to contact ...more
Alloy Craft, 140" dia. x 112" long steam autoclave for otr tire r, 90 psi, 1975
Category: Misc. Automotive Equipment
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Alloy Craft
Model: 140DIA. X 112LONG STEAM AUTOCLAVE FOR OTR TIRE R
Year: 1975
Item 7148- One (1) Used Alloy Craft 140" ID Steam Autoclave Vulcanizer, OTR chamber for retreading, pot heater, approximately 112" internal length, 90 PSI, 650F maximum operating temp, model number 140-8543, national board number 2592, serial number 11328, year 1975, previously used to retread OTR / Farm tires.
Bartell, 15" bead winder chuck, serial #UGF-1513, new, unused
Category: Misc. Automotive Equipment
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bartell
Model: 15BEAD WINDER CHUCK
One (1) NEW / UNUSED 15" Bartell Bead Winder Chuck, S/N UGF-1613.
Bartell, 16" bead winder chuck, new, unused (3 available)
Category: Misc. Automotive Equipment
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bartell
Model: 16BEAD WINDER CHUCK
Three (3) NEW / UNUSED 16" Bartell Bead Winder Chuck, S/N UGF-1662.
Kokusai #FDB-6142TB, full automatic dynamic balancing systems for truck, new, 2024
Category: Misc. Automotive Equipment
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Kokusai
Model: FULL AUTOMATIC DYNAMIC BALANCING SYSTEMS FOR TRUCK
Year: 2024
One (1) NEW 2024 Kokusai Full Automatic Dynamic Balancing System for Truck & Bus Tire, Mdl. FDB-6142TB. S/N: 54C-0470. Mfg. date: Dec 2024, Measure dynamic balance and runout of 17.5" to 24.5" Truck & Bus tire in tire production line. It is capable to run tire lubrication, dynamic balance ...more
McNeil #900-36x30, tire bladder press, 450 ton closing force, 24" ram diameter, 42" stroke (3 available)
Category: Misc. Automotive Equipment
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Mcneil
Model: TIRE BLADDER PRESS
One (1) Used McNeil Tire Tyre Bladder Press, Model 900 - 36 x 30, closing force 900,000 lbs (450 tons), ram diameter 24", distance between side plates 36", mold height 20-30", max bladder size 26x26", max tire corresponding to max bladder 11.00 x 22, max mold OD 35.5", max press opening ...more
Soberay & Sons Ltd has 10 more
listings in Misc. Automotive Equipment.
Misc. Laboratory and Research Equipment
2 Results
Oscillating Disc Rheometer, Monsanto #ODR-2000, serial 12AHI2117
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Monsanto
Model: ODR-2000
One (1) Used Monsanto Rheometer, Model ODR 2000, Oscillating Disc Rheometer designed to test the cure properties of mixed rubber. A modern version of the rubber industries most popular test instrument. No computer or software included. S/N 12AHI2117.
Rheometer, Monsanto #ODR2000, oscillating disc rheometer, TechPro Compugraph version 6.60 software included
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Monsanto
Model: ODR2000
One (1) Used Monsanto Rheometer, Model ODR 2000, Oscillating Disc Rheometer designed to test the cure properties of mixed rubber. A modern version of the rubber industries most popular test instrument. No computer or software available.
Miscellaneous Mixers and Blenders
1 Result
Farrel #F270, Unidrive mixer, 2-wing rotors, Toshiba 1000 HP @ 1180 RPM motor, hydraulic unit
Category: Miscellaneous Mixers and Blenders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Model: F270
Item 1080 - One (1) Farrel F270 Unidrive Mixer, 2-wing rotors, Toshiba 1000 HP @ 1180 RPM 4160 VAC single speed motor & drive, Farrel Unidrive 24:1 ratio 1.75 SF gearbox, rotor speed 50 RPM, FYH dust stops with lube panel 12-points lube, 8-points process, Hydraulic unit rated at 860 PSI main pressure, 820 PSI dust ...more
Miscellaneous Plastic and Rubber Equipment
19 Results
ASF, Cooling Drum Stand for Rubber Calendering, (11) 23" x 68" jacketed cooling drums
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Asf
Item 4479 Eleven (11) Used ASF 23" x 68" Cooling Drums, jacketed for efficient cooling, vertical stand will pillow block bearings included.
ASF, 23" x 68" cooling drums, jacketed for effiicent cooling, pillow block bearings (6 available)
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Asf
Six (6) Used ASF 23" x 68" Cooling Drums, jacketed for efficient cooling, pillow block bearings.
Bolling stock guides set, for Adamson 26" x 26" x 84" roller mill, complete (4 available)
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bolling
One (1) Used Complete set of stock guides for an Adamson 26" x 26" x 84", 650mm x 2100mm, roller mill.
Custom, Hydraulic Guillotine Rubber Bale Cutter, 86" blade width, 60" daylight under blade, 25 HP, 460 Volt
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Custom
Item 9098 - One (1) Used 86" Hydraulic Guillotine Bale Cutter, 86" blade width, 60" daylight under blade, self-contained hydraulic unit 25 HP 460 VAC, free standing, complete with operator controls.
Custom extruder trad head 10" x 19"
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Custom
One (1) Used Custom 10" extruder tread head for making up to 19" wide treads.
Soberay & Sons Ltd has 14 more
listings in Miscellaneous Plastic and Rubber Equipment.
Mixers-blenders and Agitators for Rubber or Plastic
15 Results
Bolling # -4, rubber mixer, 80 liter, 150 lb batch, 22:1 reduction ratio, 55-80 RPM
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bolling
One (1) Used Stewart Bolling #4 Rubber Mixer, 80 liter, 150 lb batch, gearbox Bolling unidrive double reduction horizontal parallel shaft mixer speed reducer, arrangement L-RR, 22:1 reduction ratio, 55-80 RPM, pneumatic hopper, hydraulic dust seals, 2 wing rotors, no motor or electrical panels.
Bolling #00, lab rubber mixer, 1.6 liter, 2.6 lb. capacity, cored rotors, feed hopper
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bolling
One (1) Used_Stewart_Bolling_Lab_Banbury Mixer, 1.6 liter, 2.6 lb.capacity, 96 cu. in net volume of mixer chamber, jacketed mixing chamber, cored rotors, feed hopper, pneumatically operated ram with floating weight, slide door discharge, right angle gearbox, mounted on base.
Bolling #10 rubber mixer, 195 liter chamber, 350 lb batch, pneumatic hopper
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bolling
One (1) Used Stewart Bolling #10 Rubber Mixer, 195 liter chamber, 350 lb batch, 2-wing tangential rotors, 600/300 HP, 1180/580 RPM, 4160 Volt Motor, Bullgear drive, 40/20 RPM rotor speed, pneumatic hopper, SSA dust seals, many spares, no base or slide door assembly available.
Farrel Banbury #11D, rubber mixer, 24:1 redcution ratio, 22" pneumatic hopper
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Item 1074 - One (1) Used Farrel #11D 11D Banbury Rubber Mixer, 2-wing tangential rotors, Lufkin DF850 unidrive gearbox 24.1:1 reduction ratio, no motor, 22 inch pneumatic hopper, rotac actuator, FYH dust seals.
Farrel, Banbury #BR, lab rubber mixer, jacketed, cored rotors, feed hopper, 25 HP, 480 V.
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Used Farrel Laboratory BR Banbury Mixer, S/N 65A4417, with 2.6 Lb. Capacity, 96 Cu. In Net Volume of Mixer Chamber, Jacketed Mixing Chamber, Cored Rotors, Feed Hopper, Pneumatically Operated Ram with Floating Weight, Chrome Plated Body, 25 hp, 480 Volt, 4-Speed Motor with Panel, Machine Is Cabinet Style ...more
Soberay & Sons Ltd has 10 more
listings in Mixers-blenders and Agitators for Rubber or Plastic.
Molding Compression Hydraulic Presses
4 Results
75 Ton, Wabash, Transfer Press, 4-Post, 7/18" Stroke, 15" x 15" Platens
Category: Molding Compression Hydraulic Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Wabash
Item 3040 One (1) Used Wabash Transfer Press, 15" x 15" platens, 75 Ton closing force, 25T-transfer press, electric platens, individual controls, adjustable daylight, self contained hydraulic unit, 4-post.
150 Ton, TMP, hydraulic rubber press, 6 stroke, 6" DL, 18" x18", electric platen, self contained hydraulic unit
Category: Molding Compression Hydraulic Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Tmp
Item 3050 - One (1) Used TMP 18" x 18" press, 150 ton, 6" daylight between platens, 6" stroke, (1) electric platen, self contained hydraulic unit, controls.
400 Ton, French Oil TMP, hydraulic press, 6 stroke, 12" DL, 24" x28", electric platen
Category: Molding Compression Hydraulic Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: French Oil
Item 3082 - One (1) Used TMP 24" x 28" press, 400 ton, 12" daylight between platens, 12" stroke, (1) electric platen, incomplete self contained hydraulic unit, incomplete controls.
400 Ton, TMP French Oil, hydraulic press, 6 stroke, 12" DL, 24" x28", electric platen
Category: Molding Compression Hydraulic Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Tmp
One (1) Used TMP 24" x 28" press, 400 ton, 12" daylight between platens, 12" stroke, (1) electric platen, incomplete self contained hydraulic unit, incomplete controls.
Parts for Mixers and Blenders
49 Results
Bainite hopper for F620, 620 liter mixer, 24" x37.5" floating weight opening, new
Category: Parts for Mixers and Blenders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bainite Hopper For F620
One (1) New Bainite Hopper for F370 litre mixer, 24" x 37.5" floating weight opening (weight not included), 26in pneumatic cylinder with rod.
bolling, 2-wing, semi-unidrive
Category: Parts for Mixers and Blenders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bolling
Item 1738 - One (1) Used Bolling #4 80L Mixer Rotor, 2-wing, semi-unidrive.
bolling, 10 mixer rotor set, 2-wing, bull gear configuration, rebuilt
Category: Parts for Mixers and Blenders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bolling
One (1) Rebuilt set of Bolling #10 rotors, 2-wing, bull gear configuration.
Coupling Half for 11D or F270 mixer, 80T tooth, 8.5" bore
Category: Parts for Mixers and Blenders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Coupling Half For 11d Or F270 Mixer
One (1) Used Coupling Half for #11D or F270 Mixer, 80T tooth, 8.5" bore.
Coupling Half for 11D or F270 mixer, 68T tooth, 15.5" bore
Category: Parts for Mixers and Blenders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Coupling Half For 11d Or F270 Mixer
One (1) Used Coupling Half for #11D or F270 Mixer, 68T tooth, 15.5" bore.
Soberay & Sons Ltd has 44 more
listings in Parts for Mixers and Blenders.
Plastic and Rubber Calenders
23 Results
6" x 12" Bolling, 3-roll lab calender, US varidrive motor, cabinet style, automatic lubrication
Category: Plastic and Rubber Calenders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bolling
One (1) Used Bolling 6x12 3-Roll Lab Calender, US Varidrive motor 440 VAC, Cabinet style, under-slung drive, manual nip adjustment top and bottom, cast endframes, automatic lubrication.
8" x 16" Farrel, 4-roll inverted " L" calender, 15 HP, direct drive, cabinet style
Category: Plastic and Rubber Calenders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Used Farrel 8 x 16 4-Roll Inverted "L" calender, 15 HP GE gearhead motor 1750/3000 RPM 200VAC, direct drive, dual connecting gear sets left and right side, adjustable stock guides, ratchet roll adjustment, cabinet style.
8" x 20" Bolling, 2 roll silicone calendar, chrome rolls, 20 HP, vari-speed, chain drive
Category: Plastic and Rubber Calenders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bolling
One (1) Used Bolling 8" x 20", 200mm x 500mm, 2-Roll Rubber Calender, Silicone Calender, chrome rolls, 20HP motor, variable speed, chain drive, fabricated steel frames, manual nip adjustment, cabinet style, adjustable aluminum guides.
12" x 24" Farrel, 4-roll inverted " L" calender, 100 HP, 58.393:1 gearbox, chrome rolls
Category: Plastic and Rubber Calenders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Used Farrel 12 x 24 4-Roll Inverted "L" Calender, GE 100 HP 1750/2200 RPM 500 VDC motor, direct drive 58.393:1 gearbox, chrome rolls, nylon guides. Suitable for silicone, rubber or plastic. Line equipment including let-off, wind-up and cutter are available.
16" x 48" Allen-Bradley, 2 roll rubber calender, vertical
Category: Plastic and Rubber Calenders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Allen-Bradley
One (1) Used Allen 16" x 48", 400mm x 1220mm, 2-Roll Rubber Calender, drive can be built to suit.
Soberay & Sons Ltd has 18 more
listings in Plastic and Rubber Calenders.
Plastic Rubber Mills
19 Results
6" x 13" Bolling, lab mill, cabinet style, under slung triple chain drive, nylon guides, 7.5 HP
Category: Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bolling
Item 2008-1 - One (1) Used Bolling Lab Mill, 6 x 13" (150 x 330) rolls, cabinet style, under-slung triple chain drive, nylon guides, 7.5 HP 230/460 VAC brake motor, variable speed, push button controls, SS rotary unions for heating/cooling rolls, mechanical nip adjustment, knee safety.
6" x 13" Farrel, lab mill, cabinet style, under slung drive, belt driven, 7.5 HP, rebuilt
Category: Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Rebuilt Farrel Lab Mill, 6 x 13" (150 x 330) rolls, cabinet style, under-slung drive, belt driven, flip up guides, 7.5 HP motor and drive, push button controls with START / STOP / REVERSE, knee and overhead safety, 16 week delivery.
6" x 13" Farrel, rubber lab mill, cabinet style, under slung drive, belt driven, 7.5 HP
Category: Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Used Farrel Rubber Lab Mill, 6 x 13" (150 x 330) rolls, cabinet style, under-slung drive, belt driven, flip up guides, without motor, push button controls, knee and overhead safety.
6" x 13" Farrel, lab mill, cabinet style, underslung dual drive, belt driven, vari-speed
Category: Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Used Farrel Lab Mill, 6 x 13" (150 x 330) rolls, cabinet style, under-slung DUAL DRIVE, individual drive, belt driven, flip up guides, dual 5 HP 440 VAC brake motors, variable speed, push button controls, knee and overhead pull cord safety.
8" x 16" Farrel mill roll, rear roll, cored for cooling, smooth surface
Category: Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Item 2620 - One (1) Used Farrel 8" x 16" Mill Roll, rear roll, cored for cooling, smooth surface.
Soberay & Sons Ltd has 14 more
listings in Plastic Rubber Mills.
Plastic Slitters
1 Result
Joh Peter Falter, 48" wide pneumatic slitter, adjustable width
Category: Plastic Slitters
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Joh Peter Falter
Item 9058 - One (1) Used Joh. Peter Falter (Germany) 48" wide pneumatic slitter, adjustable width.
42" x 150" x 3", Venango steam platens, for hydraulic compression press (2 available)
Category: Platens
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Model: VENANGO STEAM PLATENS
Two (2) Used Venango 42" x 150" x 3" Steam Platens for Hydraulic Compression Press.
58" x 52" x 3", Eemco steam platens, for hydraulic compression press (6 available)
Category: Platens
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Model: EEMCO STEAM PLATENS
Six (6) Used Eemco 58" x 52" x 3" Steam Platens for Hydraulic Compression Press.
60" x 60" x 2", French steam platen, for hydraulic compression press
Category: Platens
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Model: FRENCH STEAM PLATEN
One (1) Used French 60" x 60" x 2" Steam Platen for Hydraulic Compression Press.
Right Angle Gear Increasers and Reducers
4 Results
40 HP, Falk, right angle gearbox reducer, 69.00 :1 ratio
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Falk
One (1) Used Falk Gearbox Reducer, 40HP, 69:1 ratio, right angle, previously used on a cushion calender.
90 HP @ 1750 RPM input, SEW Eurodrive #K157AD7, gearbox reducer, 46.79:1 ratio
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Sew
Item 8108 - One (1) Used SEW-Eurodrive Gearbox Reducer, Type K157AD7, 60 HP service rating, 46.79:1 reduction ratio, 90 HP catalog rating, 159,300 lb torque, 1750 RPM input speed.
150 HP @ 1750 RPM input, 37 RPM output, Philadelphia gearbox reducer, 47.10 :1 ratio
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Philadelphia
Item 8119 - One (1) Used Philadelphia Gearbox Reducer, Size Type 3615, 100 HP service rating, 47.1:1 reduction ratio, 150 HP catalog rating, 1750 RPM input speed, 37.35 RPM output speed.
1000 HP @ 900 RPM, Lufkin #D890AH, double reduction horiz parallel shaft, 22.48:1 ratio
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Lufkin
Item 8394 - One (1) Used Lufkin model D890AH double reduction horizontal parallel shaft mixer speed reducer, arrangement L-RR, 22.48:1 reduction ratio, 1770 HP Catalog Rating, Service Rating 1,000 HP @ 900 RPM with 1.77:1 Service Factor. This unit is complete with anti-friction type roller bearings on all shafts ...more
26" x 38" Farrel, cracker mill roll, front roll, cored for cooling, 17" bushing journals
Category: Roll Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Used Farrel 26" x 38" Cracker Mill Roll, front roll, cored for cooling, 17" bushing journals, corrugated surface.
26" x 38" Farrel, cracker mill roll, rear drive roll, cored for cooling, 17" bushing journals
Category: Roll Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Used Farrel 26" x 38" Cracker Mill Roll, rear drive roll, cored for cooling, 17" bushing journals, corrugated surface.
10' Dabsco, rotary drum rubber strip cooler, batch-off, 10' drum length, large capacity
Category: Rotary Drum Dryers
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Dabsco
One (1) Used Dabsco Rotary Drum Rubber Strip Cooler, batch-off, 10ft drum length, large capacity, ideal for cooling strips of rubber from a mill or extruder.
Scrap Yard Machinery - Miscellaneous
1 Result
RCM, 32" hydraulic guillotine bale cutter, self-contained hydraulic unit, free standing, new/unused
Category: Scrap Yard Machinery - Miscellaneous
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Rcm
Item 9074 - One (1) NEW / UNUSED RCM 32" Hydraulic Guillotine Bale Cutter, 32" blade width, 18" daylight under blade, self-contained hydraulic unit 7.5 HP, free standing, complete with operator controls.
48" Custom rubber slitter, chain driven pull rolls via 7.5 HP 230/460 VAC motor, 7 rotary knives
Category: Slitters
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Custom
Custom slitter designed to cut 48" sheets into (8) 6" strips, the slitter is comprised of a feed conveyor 54" wide x 36" long, chain driven pull rolls via 7.5 HP 230/460 VAC motor, seven (7) rotary knives. O/A dimensions 62" x 74" x 95"H.
Doss #dSort3 O-Ring Gasket automatic sorting machine w/dbl semi-transparent tables, 2021
Category: Sorting Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Doss
Model: DSORT3
Year: 2021
One (1) Used Doss dSort3 O-ring & Gasket sorting machine, designed by Doss Visual Solution is an automatic sorting machine with double semi-transparent tables. Frame field 10 55 mm, cross section 0.8 5 mm, camera resolution 5 megapixel, matrix camera type, frame field 60 mm. The machine is two tables and a piece ...more
Squirrel Cage AC Electric Motor
6 Results
100 HP 1770 RPM Westinghouse Allis-Chalmers motor, 440 Volts
Category: Squirrel Cage AC Electric Motor
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Allis-Chalmers
One (1) Used Westinghouse Motor, 100HP AC, 1770 RPM, 440 Volts, 130 Amps, 3 phase, 50 cycle.
200 HP 585 RPM General Dynamics, Frame 304BH, 250 amps, 440 Volts
Category: Squirrel Cage AC Electric Motor
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: General Dynamics
Frame: 304BH
One (1) Used Dynamics Electric Motor, 200HP AC, 585 RPM, 440 VAC, 250 Amps, 3/60, Frame 304BH.
200 HP 700 RPM General Electric, Frame 82668, AC motor, 440 Volts
Category: Squirrel Cage AC Electric Motor
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: General Electric
Frame: 82668
One (1) Used Electric Motor, 200HP AC, 700 RPM, 440 Volts, Frame 82668.
300 HP 1180 RPM General Electric #5K818846C64, AC Electric Motor, Frame 8188S, 348 amps, 460 Volt
Category: Squirrel Cage AC Electric Motor
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: General Electric
Frame: 8188S
Item 7312 - One (1) Used GE Electric Motor, 300 HP, 1180 RPM, 460 VAC, 348 Amp, Frame 8188S, Model 5K818846C64.
500 HP 880 RPM General Electric, AC Electric Motor, Frame 8210S, 348 amps, 2300 VAC
Category: Squirrel Cage AC Electric Motor
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: General Electric
Frame: 8210S
Item 7325 - One (1) Used GE Electric Motor, 500 HP, 880 RPM, 2300 VAC, 348 Amp, Frame 8210S.
Soberay & Sons Ltd has 1 more
listing in Squirrel Cage AC Electric Motor.
Temperature Control Units (Oil & Water)
1 Result
9 KW Mokon TCU #DT4009GG, temperature control unit, 1 zone, 460 V., s/n 7000918
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Mokon
Model: DT4009GG
One (1) Used Mokon TCU, 1 zone, one (1) motors 1.9 amps, 460V, heater 11.3 amps, total amps 13.2, total KW 9, model DT4009GG, S/N 7000918.
Tooling and Accessories - Miscellaneous
6 Results
Extruder Drive, Siemens, 75 HP Microprocessor DC drive, serial #16-96-D3607501-01
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Model: 16-96-D3607501-01
One (1) Used Siemens 75 HP Microprocessor DC drive, S/N 16-96-D3607501-01.
Moulds for Bladder press passenger light truck, McNeil #900-30x36, (35 available)
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Model: 900-30X36
Thirty Five (35) Bladder Molds for McNeil Model 900-30x36 Bladder Presses, suitable for passenger and light truck tire BOM presses.
9" Bore couplings, Lufkin, 28 teeth (2 available)
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Two (2) Used 9" Bore couplings, 28 teeth.
Coupling, Farrel, 6" bore, 30 teeth
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
One (1) Used 6" Bore 30 teeth coupling.
Coupling, Farrel, 15" bore, 28 teeth
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
One (1) Used 15" bore 28 teeth coupling.
Soberay & Sons Ltd has 1 more
listing in Tooling and Accessories - Miscellaneous.
3" Valves for hydraulic compression press (5 available)
Category: Valves - Miscellaneous
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Five (5) Used Valves 3" pipe for Hydraulic Compression Press, previously used on a 48" x 48" press.
