Rycat Machinery
Elmhurst, IL 60126-1604
Surplus Record Dealer Since 2026
Contact
Katie Lechelt
About
My name is Katie Lechelt, and I have been part of the recycling and scrap equipment industry for more than 16 years. I take pride in building strong relationships and helping clients find the right equipment for their operations.
If you do not see the equipment you are looking for, I can often help source it through my industry network. My goal is to provide quality equipment, clear communication, and dependable service you can trust.
Products & Services
- Recycling/Scrap/Waste Equipment
78 listings in 23 categories
2-Ram Balers
1 Result
Harris #HRB-82W-BR-BD, 2-Ram Baler, auto-tie system, infeed conveyor
Category: 2-Ram Balers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Harris
Model: HRB-82W-BR-BD
Baler operates as it should, Auto-tie system is operational, Conveyor needs some attention, Approximate weight: 120,000 lbs., HARRIS HRB-82W-BR-BD Two Ram Baler.
Alligator Shears
1 Result
24" JMC McIntyre #600GV, Hydraulic Alligator Shear, 120 metric ton shear force, 3,500 psi, 11.9" jaw opening, 2.5" round capacity, 2" square, 10 HP, 2022
Category: Alligator Shears
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Jmc Mcintyre
Model: 600GV
Year: 2022
Per Manufactures Info:, Blade Length: 24" (608 mm), Maximum Shear Force: 120 metric tons, Motor Power: 10 HP (7.5 kW), Maximum Hydraulic Pressure: 3,500 PSI, Maximum Jaw Opening: 11.9", Shearing Height: 38.5", Round Bar Cutting Capacity: 2.5", Square Bar Cutting Capacity: 2", Cycle Speed, Full Stroke: 15 cuts/minute ...more
Briquetters
1 Result
Ars #RST-600, Briquetter, 126 ton force, 20 HP, 450 lb/hr. aluminum, 900 lb/hr. steel, 1,250 lb/hr. copper, 2020
Category: Briquetters
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Applied Recovery Systems
Model: RST 600
Year: 2020
Manufacturer-rated, Aluminum: up to 450 lb/hr, Steel or cast iron: up to 900 lb/hr, Copper or brass: up to 1,250 lb/hr, 20 HP main motor, 126 tons of available force, Approximate machine weight: 5,000 lb, 2020 APPLIED RECOVERY SYSTEMS (ARS) RST 600.
Cable/Wire Strippers
2 Results
JMC McIntyre #5000, Cable Stripper, 1/4"-4" wire capacity, 138 FPM, manual control, 5.3 HP, 3PH
Category: Cable/Wire Strippers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Jmc Mcintyre
Model: 5000
Technical Data, Length: 1524mm, Height: 1510mm, Width: 1290mm, Processing speed: Up to 42m/min, Noise Level: 72 +/- 3dBA, Control: Manual Control, Power: 3 Phase: 4kW (5.3hp), 1 Phase: 3.7kW (5hp), Wire diameter Capacity: 6mm 101mm, Weight: 420kg, JMC McIntyre Model 5000.
Mizar #CBR-A, Cable Stripper, 0.04"-4.7" cable capacity, 82 FPM, 7.3 HP, transformer, 480 Volt, 3PH
Category: Cable/Wire Strippers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Mizar
Model: CBR-A CABLE STRIPPER
5.5 kW (7.3 HP) Motor, 480V / 3 Phase, Cable Capacity: 1-120 mm (0.04" - 4.7"), Processing Speed: 25 m/min (82 ft/min), Weight: Approx. 1,060 lbs, Includes Transformer, Designed to process copper and aluminum cable, including armored cable, lead-sheathed cable, rubber cable, MCM cable, and heavy insulated wire., MIZAR ...more
Can Flatteners
2 Results
Mosely, Can Densifier w/ Magnetic Conveyor, 3PH
Category: Can Flatteners
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Mosely
Mosley can densifier conveyor., 3-phase power, Runs in manual mode, Automatic mode is not currently operational, One hydraulic cylinder needs to be repacked, Conveyor included, MOSELY CAN DENSIFIER.
Stanko #DAC600, Can Densifier, 600 lbs/hr, 230 V., 3 Ph., 2004
Category: Can Flatteners
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Stanko
Model: DAC600
Year: 2004
New in 2004 - Works in Manual Mode, Auto is having issues with the eject, No Infeed Conveyor, Processes aluminum beverage cans (UBCs), Capacity: Up to 600 lbs/hr, Hydraulic log-style densification, Produces dense, stackable aluminum logs, Heavy-duty industrial construction, 230v 3 Phase, Ideal for scrap yards and ...more
Car Crushers
1 Result
OverBuilt #10HS, Car Crusher, 159-ton crushing force, 20'-3" L x 7'-6" width x 10' H crusher opening, 2400-2500 psi
Category: Car Crushers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Overbuilt
Model: 10HS
Year: 2005
Max-Pak #MP-60HD, Downstroke Baler, 20 HP
Category: Downstroke (Vertical) Balers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Max-Pak
Model: MP-60HD
20HP, Downstroke Baler, MAX-PAK MP-60HD.
72" x 42" x 48" PTR #7200HD-7, Vertical Baler, 20 HP, 7" cylinder, 54 sec. cycle, 100,041 lb. working force, 2,600 psi working pressure, 37.4 psi max. ram pressure, 480 V.
Category: Downstroke (Vertical) Balers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Ptr
Model: 7200HD-7
20 HP motor, 3-phase, 480V, 7" cylinder, Average cycle time: 54 seconds, Bale size: 72" x 42" x 48", OCC bale weight: 1,2001,600 lbs., Working pressure: 2,600 PSI, Relief pressure: 2,900 PSI, Working force: 100,041 lbs., Relief force: 111,584 lbs., Normal ram pressure: 33.5 PSI, Maximum ram pressure: 37.4 PSI ...more
Atlas #200MH, Wheeled Material Handler, 33' working reach, 44,000-47,400 lb. operating weight, 2022
Category: Excavators
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Atlas
Model: 200MH
Year: 2022
**ATLAS 200MH Used Material Handler**, - **Manufacturer:** ATLAS, - **Model:** 200MH, - **Condition:** Used, - **Equipment Type:** Wheeled Material Handler, - **Operating Weight:** Approximately 44,10047,400 lbs., depending on configuration, - **Working Reach:** Approximately 33 ft., depending on boom and stick ...more
Case CX250C, Excavator, 177 HP Isuzu diesel engine, 56,000 lb. operating weight, 1,364 hours, 2022
Category: Excavators
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Case
Model: CX250C
Year: 2022
2022 CASE CX250C Excavator available. Known for reliability and performance, this used model is ideal for various construction needs. Contact us for further on this efficient and powerful machine., 2022 CASE CX250D Excavator, 1,364 hours, Hydraulic thumb, Operating weight: approximately 56,000 lb, Engine: Isuzu ...more
Caterpillar 330CL, Crawler Excavator, 2006
Category: Excavators
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Caterpillar
Model: 330CL
Year: 2006
Caterpillar 330CL Excavator, 2006 model, used condition. Ideal for construction projects demanding reliability and performance. Contact us today for further information and to arrange a viewing. Don't miss this opportunity to enhance your fleet., 2006 CATERPILLAR 330CL.
Hitachi #ZX345-130, Crawler Excavator, 2019
Category: Excavators
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Hitachi
Model: ZX345-130
Year: 2019
John Deere #470G, Excavator, ShearCore 95R shear, 57,551-64,295 lbs. bucket digging force, 367 HP, 12,000 hours
Category: Excavators
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: John Deere
Model: 470G
JOHN DEERE 470G Excavator with 95R ShearCore Shear, Hours:, Approx. 12,000 hours on excavator, Approx. 10,000 hours on ShearCore 95R shear, Key :, 367 HP John Deere 13.5L diesel engine, Bucket digging force: 57,551 to 64,295 lbs, Arm digging force: 44,063 to 45,187 lbs, Heavy-duty single-sheet mainframe construction ...more
Kobelco #SK210LC, Auto Dismantler, 6,694 hours, 2022
Category: Excavators
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Kobelco
Model: SK210LC
Year: 2022
2022 KOBELCO 210D.
Liebherr #934C, Material Handler, magnet generator, grapple, 29,000 hours
Category: Excavators
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Liebherr
Model: 934C
Total machine hours are around 29,000., Engine / pump were replaced when we got it. Approx 7,000 hours since then. Has a generator for a magnet. Comes with the grapple., LIEBHERR 934C.
Liebherr #R934B, Material Handler, 17,000 hours
Category: Excavators
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Liebherr
Model: R934B
Total machine hours are around 17,000., Per the seller runs but normal leaks for a 20 year old machine, Grapple not included., LIEBHERR 934B.
XCMG XE75U, Excavator, 60 HP Kubota engine, 70 hours, 2023
Category: Excavators
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Xcmg
Model: XE75U
Year: 2023
2023 XE75U Bought brand new fall on 2025. 2 years remaining on full coverage warranty. Only 70 hours on it. Hydraulic thumb. Weights about 17,000 lbs., Engine & PerformanceEngine Model: Kubota V2607-CR-TIE4B Tier 4FRated Power: 60.3 HP at 2200 RPMMaximum Torque: 166.6 lbf-ft at 1500 RPMTravel Speed: 1.67 3.04 ...more
1 Yard, Orange Peel Grapple, rotating, fits 300 size machine or larger
Category: Grapples
Seller: Rycat Machinery
Location: Elmhurst, IL
1 Yard, Rotates, Fits 300 Machine or Larger, _UNKNOWN_ Grapple.
Max-Pak #HCE-60-FE-8, Horizontal Baler, closed door, 58" x 36" feed opening, 60" x 48" x 30" bale, 8" cylinder, 30 HP, 3000 psi, conveyor
Category: Horizontal Balers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Max-Pak
Model: HCE 60 FE-8
Full-penetration, closed-door design, 30 HP motor, 8-inch main cylinder, Feed opening: 58" × 36", Bale size: 60" L × 48" W × 30" H, Bale volume: approximately 50 cubic feet, Maximum system pressure: 3,000 PSI, Total pressing force: approximately 143,000 lbs., Cycle time: approximately 30 seconds ...more
Max-Pak #HCE60FE-308NR, Horizontal Baler, 2017
Category: Horizontal Balers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Max-Pak
Model: HCE60FE-308NR
Year: 2017
2017 MAX-PAK HCE60FE-308NR.
Selco #HLO-719AR-75, Horizontal Open-End Auto-Tie Baler, single-ram, 75 HP, automatic wire tie, conveyor compatible, 3PH
Category: Horizontal Balers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Selco
Model: HLO-719AR-75
Manufacturer: SELCO / Harris, Model: HLO-719AR-75, Type: Horizontal Open-End Auto-Tie Baler, Motor: 75 HP, Tie System: Automatic Wire Tie, Baler Configuration: Single-Ram, Open-End, Operation: Automatic / Continuous Feed, Application: UBC, Aluminum Cans, OCC, Paper & Plastics, Bale Length: Variable, Electrical: 3 ...more
Hydraulic Shears
4 Results
Bonfiglioli #Squalo-1000, Portable Scrap Shear, 10 metric TPH, 15.75" cut length, 7.87" round, 6.89" square, 126" pressing basin, diesel
Category: Hydraulic Shears
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Bonfiglioli
Model: SQUALO 1000
Processing capacity: Up to 10 metric tons/hour of mixed light scrap, depending on material, Automatic cutting cycle: Approximately 45 seconds, Fixed cut length: 15.75", Maximum cutting size: 7.87" round / 6.89" square, Pressing basin length: Approximately 126", Overall dimensions: Approximately 20'11" L × ...more
Genesis #GXP-500, Hydraulic Excavator Scrap Shear, 32" jaw opening, 32" jaw depth, rotator
Category: Hydraulic Shears
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Genesis
Model: GXP 500
Designed for scrap metal processing and demolition, Jaw opening: 32 inches, Jaw depth: 32 inches, Includes rotator, which works well per the seller, Excavator compatibility depends on mounting configuration, GENESIS GXP 500.
Genesis #GXP-300, Hydraulic Excavator Scrap Shear, 23" jaw opening, 24" jaw depth
Category: Hydraulic Shears
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Genesis
Model: GXP-300
No Rotator, Used Genesis GXP 300 excavator-mounted hydraulic shear designed for scrap metal processing and demolition applications. s a replaceable bolt-on piercing tip, indexable cutting blades, and an enclosed body that protects the hydraulic cylinder., Manufacturer: Genesis Attachments, Model: GXP 300, Condition: ...more
Genesis #GXP200343, Flat-Top Hydraulic Excavator Scrap Shear, 18" jaw opening, 17" jaw depth, 5'-10" reach, 2011
Category: Hydraulic Shears
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Genesis
Model: GXP200343 FLAT-TOP
Year: 2011
GXP 200 Hydraulic Processor, Model: GXP 200, Weight: 5,000 lbs, Jaw Opening: 18", Jaw Depth: 17", Reach: 5' 10", Minimum Excavator Weight (Boom Mount): 25,000 lbs, Minimum Excavator Weight (Stick Mount): 40,000 lbs, 2011 GENESIS GXP200343 Flat-Top.
Lifting Magnets
2 Results
28" Tramac #TMAG-700, Hydraulic Scrap Lifting Magnet, 770 lb. magnet, 3 KW hydraulic generator, integrated generator
Category: Lifting Magnets
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Tramac
Model: TMAG-700
Magnet Diameter: 28.3", Magnet Weight: Approx. 770 lbs, Generator: 3 kW Hydraulic Generator, Hydraulic Powered, Integrated Generator, Chain Suspended, Includes Chains, Designed for Scrap Metal Handling, Excavator / Material Handler Attachment, Magnet Activation Through Carrier Hydraulic System, Automatic Demagnetizing ...more
30" Ohio Magnetics, Electromagnetic Scrap Magnet, 230 VDC, 75% duty cycle, diesel generator, 2006
Category: Lifting Magnets
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Ohio Magnetics
Year: 2006
**OHIO MAGNETICS 30" Scrap Magnet with Diesel Generator**, New in 2006 and never used - Cable was cut and needs to be replaced, * Manufacturer: Ohio Magnetics, * Type: Scrap Handling Lifting Magnet, * Magnet Diameter: 30", * Power Requirement: 230 VDC, * Duty Cycle: 75%, * Approximate Magnet Weight: 1,250 lbs, * Coil ...more
Magnetic Separators for Scrap Yard
8 Results
Blaker-Tech #ECS-29, Eddy Current Separator, 29" working width, high-energy rotor, neodymium magnets, adjustable 3-way splitter, 2026
Category: Magnetic Separators for Scrap Yard
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Blaker-Tech
Model: ECS 29
Year: 2025
Manufactured in the UK, Working Width: 29.5" / approximately 750 mm, High-energy eddy current rotor, High-strength neodymium magnets, Separates aluminum, copper, brass and other non-ferrous metals, Effective on fine material, including particles below 5 mm depending on the application, Adjustable three-way splitter ...more
Blaker-Tech #ECS-39, Eddy Current Separator, 39" working width, high-energy rotor, neodymium magnets, adjustable 3-way splitter, 2026
Category: Magnetic Separators for Scrap Yard
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Blaker-Tech
Model: ECS 39
Year: 2026
Manufactured in the UK, Working Width: 39" / approximately 1000 mm, High-energy eddy current rotor, High-strength neodymium magnets, Separates aluminum, copper, brass and other non-ferrous metals, Effective on fine material, including particles below 5 mm depending on the application, Adjustable three-way splitter ...more
Blaker-Tech #ECS-49, Eddy Current Separator, 49" working width, high-energy rotor, neodymium magnets, adjustable 3-way splitter, 2026
Category: Magnetic Separators for Scrap Yard
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Blaker-Tech
Model: ECS 49
Year: 2026
Manufactured in the UK, Working Width: 49" / approximately 1,250 mm, High-energy eddy current rotor, High-strength neodymium magnets, Separates aluminum, copper, brass and other non-ferrous metals, Effective on fine material, including particles below 5 mm depending on the application, Adjustable three-way splitter ...more
Blaker-Tech #ECS-59, Eddy Current Separator, 59" working width, high-energy rotor, neodymium magnets, adjustable 3-way splitter, 2026
Category: Magnetic Separators for Scrap Yard
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Blaker-Tech
Model: ECS 59
Year: 2026
Manufactured in the UK, Working Width: 59" / approximately 1500 mm, High-energy eddy current rotor, High-strength neodymium magnets, Separates aluminum, copper, brass and other non-ferrous metals, Effective on fine material, including particles below 5 mm depending on the application, Adjustable three-way splitter ...more
Blaker-Tech, Drum Magnet & Feeder, 59" working width, heavy-duty industrial frame, 2026, (2 available)
Category: Magnetic Separators for Scrap Yard
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Blaker-Tech
Year: 2026
Manufactured in the UK, Working Width: 59" / approximately 1500 mm, Suitable for WEEE, automotive shredder residue, municipal waste, plastics and mixed recycling streams, Designed for continuous, high-throughput operation, Lead Time Approx 12 Weeks Delivered, 2026 Blaker-Tech 59" Drum and Feeder.
Bunting Magnetic s #SSSC-60, Stainless Steel Separator, 60" width, neodymium head pulley, 5" max. material, cleated belt, 60-120 FPM
Category: Magnetic Separators for Scrap Yard
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Bunting Magnetics
Model: SSSC 60
Never put into production, Designed to recover weakly magnetic stainless steel from mixed recycling streams using a high-intensity neodymium magnetic head pulley. Suitable for auto shredder residue, wire chopping and mixed metal recovery applications. Bunting, SSSC :, - Width: 60" as identified for your unit, - ...more
Dings Company Magnetic Group #9186, Eddy Current Separator, 24" concentric, 7" diameter magnetic rotor
Category: Magnetic Separators for Scrap Yard
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Dings Company Magnetic
Model: 9186
Model: 9186, 24" Concentric Eddy Current Separator, 7" diameter magnetic rotor assembly, Designed for separating non-ferrous metals like aluminum from plastic, paper, and corrugated recycling streams, Triple-layer shell design helps protect the magnetic rotor, Good fit for aluminum can recovery and recycling ...more
Magnapower #PMDS-32/120RE, Rare Earth Drum Magnetic Separator, 48" drum, 48" vibratory feeder, splitter box, feeder stand, 2023
Category: Magnetic Separators for Scrap Yard
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Magnapower
Model: PMDS 32
Year: 2023
Per Manufacturer's Information, Used Magnapower PMDS 32/120RE Rare Earth Drum Magnetic Separator, Designed to separate ferrous metals and ferrous fines from recycled and shredded material. Includes a 48" vibratory feeder mounted on a stand, dual out-of-balance feeder motors, and a splitter box., Manufacturer: ...more
Non-Ferrous Balers for Aluminum or Copper
1 Result
Excel Manufacturing #HV-10, Non-Ferrous Baler, 45" x 60" charge box, 45" x 60" x 30" bale, 10" main cylinder, 3,000 psi, 50 HP
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Excel Manufacturing
Model: HV10
Main Cylinder has about one year use, Excel HV-10 Non-Ferrous Baler with Material Handler, Very nice Excel HV-10 baler available with a stationary material handler and grapple. This setup increases loading efficiency and production, making it an excellent package for a non-ferrous scrap yard., Baler :, 50 HP main ...more
Plastic Granulators and Pelletizer Machines
2 Results
14" x 36" Milacron #MG-1436, Granulator, metal detector, 2020
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Milacron
Model: MG 1436
Year: 2020
14" × 36" cutting chamber, Metal detector included, 2020 MILICRON MG 1436.
Genox, Granulator, 16.5" rotor diameter, 580 RPM, (6) rotor knives, (2) bed knives, 50 HP, 2021
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Genox
Year: 2021
Motor: 50 HP (37 kW), Rotor diameter: 16.5 in (420 mm), Rotor speed: 580 RPM, Rotor knives: 6 (3×2), Bed knives: 2, Approximate weight: 6,600 lb (3,000 kg), 2021 GENOX 50HP.
Recycling Equipment
7 Results
CP Manufacturing #CMB-2400-2U-M, MetalSort Optical Sorting System, conveyor/belt assembly, pneumatic sorting, 7.5 HP, 480 Volts, 3PH, 2018
Category: Recycling Equipment
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Cp Manufacturing
Model: CMB-2400-2U-M
Year: 2018
Model: CMB-2400-2U-M, Date of Manufacture: March 2018, Electrical: 480V AC, 3 Phase, 60 Hz, Main Circuit Breaker: 30 Amp, Panel Short Circuit Rating: 5 kA, Largest Motor: 7.5 HP / 10.5 Amp, Type 1 enclosure, MSS industrial control panel with operator interface, MetalSort sorting equipment, Includes conveyor/belt ...more
Ghirarduzzi #DM100, Air-Operated Densimetric Separator, 5/16"-2.36" material, 0.3 kg/dm density difference
Category: Recycling Equipment
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Ghirarduzzi
Model: DM100
Ghirarduzzi manufactures air-operated densimetric separation machines capable of separating two materials with a density difference as low as 0.3 kg/dm., In practice, the machine performs a dry flotation process, with the advantage of being able to process very small material sizes, from 8 to 10 mm up to 50 to 60 mm ...more
Mizar #CMT-A, Cable Recycling Machine, granulator w/turbo mill, 300 lb/hr., 19 HP total, 10.1 HP granulator motor, 2026
Category: Recycling Equipment
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Mizar
Model: CMT A
Year: 2026
CMT Cable Recycling Machine is designed for efficient recovery of copper from low and medium-volume cable waste, with a strong focus on purity, energy efficiency, and compact design., The system combines precise granulation with an integrated Turbo Mill, specifically developed to fully liberate fine copper wires from ...more
Mizar #ERP-S, Wire Recycling Plant, 900 lb/hr., 35 KW, fine granulator, densimetric separator, dust collector
Category: Recycling Equipment
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Mizar
Model: ERP S
The ERP S is the most compact model of the ERP Series, designed for efficient cable recycling in limited spaces., Key Components:, Fine Granulator (FGR) ensures efficient size reduction and consistent granule output, Densimetric Separator (DES) precisely separates metal and plastic fractions, Dust Collector (DTF) ...more
Recoem #GDS-1250, Cable Granulation & Separation Line, 49.2" x 20.1" rotor, 3,500 lbs/hr, 94 HP
Category: Recycling Equipment
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Recoem
Model: GDS-1250
GDS-1250 Used Wire Processing Line, The GDS-1250 Cable Breaking Machine is built for high-volume wire and cable recycling operations, delivering efficient separation of copper, aluminum, and plastic materials from mixed cable streams. Designed for demanding scrap and recycling environments with reliable throughput and ...more
Stokkermill #K140Flexi, Wire Granulator, 220-330 lbs/hr, copper & aluminum wire & cable, dry separation, 150 hours, 2019
Category: Recycling Equipment
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Stokkermill
Model: K140FLEXI
Year: 2019
Very low-hour Stokkermill K140 Flexi wire granulation system available., LESS THAN 150 HOURS, Year: 2019, Model: FLEXI K-140, Less than 150 hours, Approx. 220330 lbs/hr capacity, Processes copper & aluminum wire/cable, Compact dry separation system, Approx. 2,205 lb machine weight, 2019 Stokkermill K140Flexi.
Stokkermill #SM-3000-STD, Cable Granulator System, pre-shredder & conveyor, 32.2 HP, 330-550 lbs/hr, 2016
Category: Recycling Equipment
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Stokkermill
Model: SM-3000 STD
Year: 2016
Stokkermill SM-3000 STD cable granulator system with pre-shredder and conveyor. This compact, heavy-duty recycling line is designed for processing copper wire, aluminum cable, and electric scrap while separating metal from insulation., Key, Model: Stokkermill SM-3000 STD, Production: approx. 330 to 550 lb/hr ...more
Scrap Baler and Scrap Metal Balers - Ferrous
4 Results
Al Jon #580, Logger/Baler Package, John Deere diesel engine, 9,500 hours, 2004
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Aljon
Model: 580
Year: 2004
Approx. 9,500 operating hours, Powered by a John Deere diesel engine, Machine remains in daily operation, Complete logger/baler package, Available for inspection while under power, 2004 Aljon 580.
Harris #TGS-324-B, 3-Ram Baler, 24" x 24" x 24" bale, 60" x 50" x 172" press box, 200 HP, 70 bales/hr., 800 lb. bale, 2004
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Harris
Model: TGS-324-B
Year: 2004
Motor: 200 HP, Bale Size: 24 x 24 x 24, variable, Press Box: 60 x 50 x 172, Production: Approximately 70 bales per hour, Bale Weight: Approximately 800 lbs., depending on material, 2004 HARRIS EQUIPMENT TGS-324-B, Bale Size (L). 24", Bale Size (W). 24", Bale Size (H). 24".
Sierra #4200, Electric Baler/Logger, 24" x 20" bale, 60 HP, 8-12 TPH baling, 9-14 TPH logging, automatic bale ejection, 2010
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Sierra
Model: 4200 ELECTRIC
Year: 2010
Used Sierra 4200 electric baler/logger for processing and densifying scrap metal., Year: 2010, Manufacturer: Sierra, Model: 4200, Configuration: Stationary Electric, Published Motor Rating: 60 HP, Bale Size: 24 x 20 x Variable Length, Automatic Baling, Logging and Bale Ejection, Published Baling Capacity: 812 Tons per ...more
Sierra #RB6000, Baler, 21,000 hours, 2013
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Sierra
Model: RB6000
Year: 2013
2013 SIERRA RB6000 Baler available. Ideal for various recycling applications. Reliable used equipment from a trusted manufacturer, suited for efficient material processing., Approx 21,000 Hours.
Scrap Choppers
1 Result
Sweed #517-XHD, Scrap Chopper, 6-5/8" x 1-5/8" infeed opening, 90 FPM, 3-1/2" cut length, air feedworks, 5 HP, stand & gaylord
Category: Scrap Choppers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Sweed
Model: 517 XHD
Includes Stand and Gaylord, The SWEED 517 XHD is a heavy-duty scrap chopper designed to reduce baling wire, steel banding, wire, cable, and other linear scrap into manageable pieces. Its rugged steel construction and powered feedworks make it well suited for demanding recycling and industrial applications, helping ...more
Scrap Crushers
2 Results
Cives #155DC, Drum Crusher, 6" bore main cylinder, 5 HP, 230/460 Volt, 3PH
Category: Scrap Crushers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Cives
Model: 155DC
6" Bore Main Cylinder, 5 HP, 230/460, 3PH Motor, CIVIS RECYCLING 155DC.
Marathon #RJ225HD, Self-Contained Trash Compactor, 42 yd receiver container capacity, 2011
Category: Scrap Crushers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Marathon
Model: RJ225HD
Year: 2011
Used Marathon RJ225HD Stationary Compactor with 42-Yard Receiver Container, Marathon RJ225HD Heavy Duty Stationary Compactor, 42-yard receiver container, Used condition, Ideal for commercial, industrial, and recycling applications, Heavy-duty hydraulic compaction system, Sold as-is, where-is, 2011 MARATHON RJ225HD.
Shredders
21 Results
Applied Recovery Systems, Axis Crusher/Shredder, 1 ton/hr, 71 RPM rotor, discharge conveyor, 2023
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Applied Recovery Systems
Model: AXIS CRUSHER
Year: 2023
2023 ARS Axis Crusher Shredder, used. Durable equipment from a trusted manufacturer. Ideal for heavy-duty material reduction tasks. Perfect for enhancing efficiency in industrial applications., 1 Ton Per Hour Approximage Capacity, Low-Speed / Low-Noise, Shred and Crush Large Bundles of Tangled Scrap And Turning Into ...more
Cresswood #EF2440AST, Low-Speed Grinder, 10" diameter x 24" Rotor, 400 RPM, 42 Cutters, 40 HP, Infeed Conveyor, 2009
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Cresswood
Model: EF2440AST
Year: 2009
Heavy-duty Cresswood EF2440AST low-speed grinder designed for demanding size-reduction and material destruction applications. Built for continuous industrial operation, this machine is ideal for processing wood waste, plastics, paper, and recycling materials., s:, Heavy-duty industrial construction, Horizontal feed ...more
Cresswood #HF4050ALT, Single-Shaft Shredder, 40" x 40" cutting chamber, 24" ram stroke, 16" rotor diameter, 4" shaft diameter, 90-125 RPM, 2007
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Cresswood
Model: HF4050ALT
Year: 2007
Cutting Chamber 40 x 40, Ram Stroke 24, Rotor Diameter 16, Grinding Head Speed 90-125 rpm, Frame Thickness 5/8, Number of Cutter Teeth 56, Shaft Diameter 4, Mid-Range Hopper Volume 2.5 Cubic Yards, Floor Area of Unit 86 x 76, Shipping Weight 5,900 lbs., 2007 CRESSWOOD HF4050ALT.
Franklin Miller #TM2300, Twin Shaft Industrial Shredder, low-speed high-torque
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Franklin Miller
Model: TM2300
Heavy-duty twin-shaft industrial shredder designed for low-speed, high-torque size reduction of plastics, cardboard, packaging, textiles, product destruction materials, and industrial waste., s:, Twin-shaft design, Low-speed, high-torque operation, Heavy-duty alloy steel cutters, Planetary gear drive, Rugged ...more
Hammel #950DK, Portable Dual Shaft Shredder, slow speed, track mounted, 710 HP, hydraulic drive, remote control, large feed hopper, discharge conveyor, 2013
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Hammel
Model: 950DK
Year: 2013
Approx. 710 HP, Dual-shaft, slow-speed design, Track mounted / portable, Hydraulic drive, Remote controlled, Large feed hopper, Heavy-duty discharge conveyor, No overband magnet, Shafts need to be replaced, Suitable for scrap metal, C&D, bulky waste, white goods and other difficult materials depending on shaft ...more
Hammel #950DK, Portable Shredder, dual shaft, 750 HP, track mounted, large feed hopper, heavy-duty discharge conveyor, hydraulic drive, remote control, 2011
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Hammel
Model: 950DK
Year: 2011
Approx. 710 HP, Dual-shaft, slow-speed design, Track mounted / portable, Hydraulic drive, Remote controlled, Large feed hopper, Heavy-duty discharge conveyor, No overband magnet, Shafts need to be replaced, Suitable for scrap metal, C&D, bulky waste, white goods and other difficult materials depending on shaft ...more
Hammel #VB-450DK, Track-Mounted Dual Shaft Shredder, diesel engine, 175 hours, 2020
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Hammel
Model: VB 450DK
Year: 2020
Only 175 Original Hours, The HAMMEL VB 450DK is a compact, track-mounted dual-shaft primary shredder engineered for efficient volume reduction of wood waste, C&D debris, pallets, green waste, commercial waste, and light industrial scrap. Known for its high-torque, low-speed shredding system, the VB 450DK delivers ...more
HSM #HDS-150, Hard Drive Shredder, 210 drives/hr, 1.18" strip cut
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Hsm
Model: HDS 150
HSM HDS 150 is a hard drive shredder to destroy optical, magnetic, and electronic storage media in a secure and economical way. The HDD shredder has a selection mode for accommodating different materials such as CDs & DVDs, Floppy Disk, Hard Drives, and Magnetic Tapes., The hard drive shredder can shred up to 210 ...more
HSM #HDS-150, Hard Drive Shredder, 3.5" max. hard drive size, automatic reverse jam protection, hardened steel cutting shafts, 2 HP, 120 Volts, 2015
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Hsm
Model: HDS-150
Year: 2015
HSM HDS 150 Hard Drive Shredder, Manufacturer: HSM, Model: HDS 150, Heavy-duty hard drive and digital media shredder, Processes hard drives up to 3.5", Shreds CDs, DVDs, floppy disks, magnetic tapes, credit cards, staples, and paper clips, Security Level: H-3 (DIN 66399), Continuous-duty operation, Automatic reverse ...more
Mizar #SSH-S, Single Shaft Shredder, 9.4" rotor diameter, 16.9" rotor length, 1.1" x 1.1" blades, 22.8 HP, 2026
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Mizar
Model: SSH S
Year: 2026
VALUE, TOTAL POWER 17 kW / 22.8 HP, ROTOR DIAMETER 240 mm / 9.4", ROTOR LENGTH 430 mm / 16.9", BLADE QUANTITY 27+20, BLADE DIMENSION 30x30mm / 1.1"×1.1", OVERALL LENGTH 1.400 mm / 55.1", OVERALL WIDTH 900 mm / 35.4", OVERALL HEIGHT 1.200 mm / 47.2", OVERALL WEIGHT 850 kg / 1,870 lb, VALUE, TOTAL POWER 17 kW / ...more
Shred-Tech #ST-75, Dual Shaft Shredder, dual 30 HP motors, hydraulic drive, automatic overload protection
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Shred-Tech
Model: ST-75
Year: 2015
SHRED-TECH ST-75 Used Dual Shaft Shredder, No Control Panel, Highlights, Dual shaft, low-speed, high-torque shredder, Dual 30 HP electric motors (60 HP total), Heavy-duty hex shaft design, Automatic overload protection with shaft reversal, Hydraulic drive system, Rugged industrial steel construction, Designed for ...more
Shred-Tech #ST-25, Shredder, 16" x 27.5" cutting chamber, up to 1 TPH
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Shred-Tech
Model: ST-25
Compact industrial shredder for size reduction in metal, plastic, e-waste, paper, and recycling applications., ST-25 model :, Cutting chamber accepts material up to 16 × 27.5, Manufacturer lists light-duty throughput of up to 1 ton per hour, depending on material, SHRED-TECH ST-25.
Shred-Tech #ST20, Shredding Chamber, 2017
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Shred-Tech
Model: ST20
Year: 2017
No Motor - Just the shredding chamber, 2017 SHRED-TECH ST20.
SSI #M55, Dual Shaft Shredder, 23" x 30" cutting chamber, 1.5" cutters, 40 HP, 2012
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Ssi
Model: M55
Year: 2012
Year: 2012, 40 HP Electric Motor, Dual Shaft, Low-Speed High-Torque Design, Approx. 23" x 30" Cutting Chamber, 1.5" Cutters, 2012 SSI M55, Power. 40 hp.
SSI #M85, Dual Shaft Shredder, 35" x 63" cutting chamber, 18.1" cutters, 100 HP, 575 V., 1,000 hours, 2020
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Ssi
Model: M85
Year: 2020
Shredder s:, Patented ACLS - Advanced Cutter Locking System, Patented SSP - Severe Shock Protection System, Individually removable cleaning fingers, Proprietary bearing & seal arrangements at shredder gearbox and endplate, CNC machined shredder frame torsion box design, modular construction, Heavy-duty gear ...more
Sweed #PCR1034, Single-Shaft Prechopper, variable-speed reversing rotor, hydraulic feed ram, touchscreen HMI, conveyor, magnetic separation belt
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Sweed
Model: PCR1034
Single-shaft prechopper designed for reducing ferrous and nonferrous scrap material. Previously operated in SWEEDs demonstration system, this package includes a conveyor, magnetic separation belt, outfeed chute, and new electrical controls., - Variable-speed rotor with reversing capability, - Auto-sensing hydraulic ...more
UNTHA #RS40, Quad Shaft Shredder, 40" x 30" feed opening, 60 HP, 1,500 hours, 2013
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Untha
Model: RS40
Year: 2013
60 HP electric drive, New in 2013, Approx 1500 Hours, Four shaft, low speed, high torque design, 40" x 30" feed opening (approximately), Integrated sizing screen for consistent output, Automatic shaft reversing to clear overloads, Push-button controls, Heavy-duty feed hopper, Rugged steel base/support structure, Ideal ...more
Vecoplan #RG-42/60-XL, Shredder System, Gaylord tipper & conveyors, 15" diameter x 42" rotor, (48) 1.5" cutters, 60 HP, 460 Volt, 2008
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Vecoplan
Model: RG 42/60 XL
Year: 2008
Complete Vecoplan shredding system previously used for product destruction. The system was operational until it was removed from service in October 2025., System Includes:, Vecoplan RG42/60XL shredder, Gaylord tipper, Inclined infeed conveyor, Primary outfeed conveyor, Secondary inclined discharge conveyor, The ...more
Weima #ZMK-60, Quad Shaft Shredder, 50" wide x 27" long cutting chamber, 74" x 55" hopper, 12.1" rotor/disc diameter, (2) 30 HP motors, 2005
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Weima
Model: ZMK-60
Year: 2005
4-shaft cutting system, (2) 30 HP motors, about 60 HP total, Cutting chamber: approximately 42" wide × 27" long (1,260 × 685 mm), Hopper: approximately 74" × 55", Rotor/disc diameter: approximately 12.1", Approx. machine weight: 9,500 lb, Screens available for controlling final particle size ...more
Westinghouse Salem Machinery #1636HT, Single Shaft Shredder, 66" x 37" hopper, 40 HP
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: West Salem Machinery
Model: 1636HT
-40 HP motor, -66" x 37" hopper, -Knives have 90%+ life remaining - Per the Seller, -Model: 1636 HT, -Blue painted finish, -Heavy-duty industrial machine, West Salem Machinery 1636HT.
Tire Shredding & Grinding Line, 5 metric TPH, 47.2" max. tire, 22" x 31.5" grinder rolls, 148 HP rubber grinder, magnetic conveyors, vibrating screens, 2020
Category: Shredders
Seller: Rycat Machinery
Location: Elmhurst, IL
Model: TS-1200/XKP-560
Year: 2020
TS-1200 / XKP-560 Tire Shredding & Grinding Line, Rire processing line includes a TS-1200 tire shredder, XKP-560 rubber grinder, magnetic conveyors, vibrating screens, and material transfer conveyors., **TS-1200 Tire Shredder**, - Listed production capacity: 5 metric tons per hour, - Maximum tire feed size: 47.2" ...more
Tooling and Accessories - Miscellaneous
1 Result
Baling Wire, single & double loop bale ties, black annealed box wire, galvanized high-tensile wire
Seller: Rycat Machinery
Location: Elmhurst, IL
American Baling Products offers baling wire to keep your recycling operation moving, including single- and double-loop bale ties, black annealed box wire for automatic balers, and galvanized high-tensile wire. From manually tying cardboard and plastic bales to supporting high-volume baling operations, ABP offers wire ...more
Magna Montone, Dump Trailer, 39' long, swing door, 2009
Category: Trailers
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Magna Montone
Year: 2009
39', Swing door, 2009 Magna Montone Dump Trailer.
SAS #Engine-Puller, Front End Wheel Loader
Category: Wheel Loaders
Seller: Rycat Machinery
Location: Elmhurst, IL
Mfr: Sas
Model: ENGINE PULLER
SAS Engine Puller used front end loader available. Ideal for engine handling tasks. Popular SAS brand ensures quality. Great for workshops wanting to boost efficiency., SAS Engine Puller.
