Pro Mach
Contact
Joseph Piegat
13 listings in 10 categories
Banding Lines and Coil Packaging Lines
1 Result
10000 lb. Coil Banding line, 72" OD
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Banding Lines and Coil Packaging Lines
Seller: Pro Mach
Location: Valparaiso, IN
*10,000 Lbs. capacity x 72" O.D. Downlayer, In-line coil discharge, Powered roller top, * 30 Ft. 72" O.D. capacity x 10,000 Lbs. powered roller conveyor, * 10,000 Lbs. x 72" O.D. coil ...more
72" width Paxson, hydraulic pivoting & extending type peeler table
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Coil Peelers
Seller: Pro Mach
Location: Valparaiso, IN
Model: PAXSON
* Maximum strip width - 72", * Hydraulic cylinder actuated Table pivot, * Hydraulic cylinder actuated table extend/retract, * Free standing design.
Magnetek #4216-VG-S4, 150 HP A.C. variable speed crane drive
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Crane Controls
Seller: Pro Mach
Location: Valparaiso, IN
Mfr: Magnetek
Model: 4216-VG-S4
* Never Used - (still on skid).
72" x .075" Rowe Loop Feed Cut-To-Length line x 40000 Lbs. cap.w/ 6-Hi Herr-Voss Leveler
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Cut-to-length Lines
Seller: Pro Mach
Location: Valparaiso, IN
Mfr: Rowe
Power Squaring Shears (Inch)
1 Result
3/16" x 10' Cincinnati #4410, mechanical, 36" front operated power back gauge, front squaring arm, s/n #33216
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Power Squaring Shears (Inch)
Seller: Pro Mach
Location: Valparaiso, IN
Mfr: Cincinnati
Model: 4410
50000 lb. Paxson, recoiler with outboard bearing support, 72" wide
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Recoilers
Seller: Pro Mach
Location: Valparaiso, IN
Mfr: Paxson
* 50,000 Lbs. max coil weight capacity w/outboard bearing support, * 72" Max. coil O.D., * 75 HP D.C. motor and drive, * Hydraulic Push-off plate, * Air cylinder actuated overarm strip ...more
75" wide x 50' long, Powered Roller Conveyors, 10000 lbs. capacity, never used
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Roller Type Conveyors
Seller: Pro Mach
Location: Valparaiso, IN
96" wide x 7.8' long, Pwrd roller conveyor, 31" passline height, (3) sections-6000 lb capacity (3 Lots) available)
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Roller Type Conveyors
Seller: Pro Mach
Location: Nashville, TN
Mfr: Pwrd
* A.C. gearmotor drive, * Chain driven rollers, * 1 Lot consists of: (1) gearmotor driven section & (2) chain driven sections, * Overall length - Approx. 24 Ft. long.
Scrap Winders for Coil Handling
1 Result
Paxson, 3000 lbs capacity x 3/16" hydraulic driven scrapwinder
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Scrap Winders for Coil Handling
Seller: Pro Mach
Location: Valparaiso, IN
Mfr: Paxson
* 3,000 Lbs. Max. weight capacity, * 3/16" Max. thickness Capacity, * Hydraulic cylinder actuated self-dumping, * Hydraulic motor driven, * Hydraulic strip level wind.
72" x 8" Paxson, drop-in slitter heads (2) with tooling
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Slitting Lines
Seller: Pro Mach
Location: Valparaiso, IN
Mfr: Paxson
* (2) Paxson 72" wide x 8" diameter drop-in slitter heads, * Main sub base has 100 HP D.C. motor and drive, * Jack screw arbor penetration adjustment, * Large quantity of slitter knife ...more
I.K.S., Slitter Knives, 8" ID x 14" OD x .495" Thick (240 Pcs. available)
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Slitting Lines
Seller: Pro Mach
Location: Valparaiso, IN
Mfr: I.k.s.
I.K.S., Slitter Knives 9" ID x 16" OD x 1" Thick, (63 Pcs. available)
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Slitting Lines
Seller: Pro Mach
Location: Valparaiso, IN
Mfr: I.k.s.
72" wide Combination Roll/Drag Tension Stand w/recirculating heat exchanger
Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Tension Stands
Seller: Pro Mach
Location: Valparaiso, IN
* Pivoting entry strip separator tooling bar, * Entry idler strip retaining roller, * Hydraulic cylinder actuated pivoting upper drag board open/close, * Full width air bag strip ...more
