
Orca Machine Tools Inc.
Contact
Theron Horn
763-494-9827
About
Orca Machine Tools Inc., used machine tool specialists was founded in 1992 and provides late model used machine tools, manufacturing engineering services, appraisal services, machine tool services, and buys and sells quality machine tools.Products & Services
- Automatic Screw Machines, Swiss Type
- Boring Mills, Horz. & Vert.
- CNC Machinery
- Die Casting Machines
- Grinders
- Lathes, CNC
- Machining Centers, CNC
- Presses
Associations & Affiliations

107 listings in 35 categories
24.5" width x 36" H Precision Angle Plate, T-Slots, drilled/tapped, excellent, (2 available) pair
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Angle Plates
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Width 2412 inches Height 36 inches Dimensions 24-1/2" W x 36" Ht. Weight 1345 pounds Base Dimensions Base 24-1/4" x 24-3/4" Wide (Approx) Drilled / Tapped 5-1/2" x 4-1/2" Squared on Center ...more
70" width x 60" H Precision Angle Plate, drilled/tapped, 4" on center, excellent
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Angle Plates
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Width 70 inches Height 60 inches Dimensions 5' 10" w x 5' Ht. Face, Base 37" x 70" Width Weight 5450 pounds Base Dimensions 37" F-B x 70" LR Drill / Tapped Holes on Face 4" on ...more
Silberhorn #Multijet-2-3-Ultrasonic, basket type parts washer, automatic load & unload, 300 lb. max load, 2008
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Automated Batch Washers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Silberhorn
Model: MULTIJET-2-3-ULTRASONIC
Year: 2008
COMPLETE AS FOLLOWS:, AUTO LOAD AND UNLOAD, PROGRAMABLE CYCLES, BATCH - BASKET SYSTEM, MAX. LOAD - 300 LBS, FRAME SIZE - 670 X 470 X 300 MM, THREE TANKS, ULTRASONIC WASH, 700 LITER ...more
FMB #Turbo-5-42/4200, magazine bar feed, 85-90 psi, 1/8" to 1-5/16" barstock capacity, 2000
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Bar Feeders and Loaders
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Fmb
Model: TURBO-5-42/4200
Year: 2000
CNC Control yes Type of CNC Control Mounted Keyboard Barstock Capacity: 1/8" - 1-5/16" Magazine Capacity: 280mm or (11) 1" Bars Return Speed: 26" Per Second Insertion Rate: 16" Per Second ...more
Bed and Knee Milling Machines - Vertical
1 Result
Bridgeport #2J, vertical mill, 9" x43" table, 2 HP, Power Feed, 2-Axis digital read out, very good
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Bridgeport
Model: 2J
Dimensions 60"x58"x81" Weight 2300 pounds Make: Bridgeport, Model: 2J, Type: Vertical Milling Machine, Serial Number: 249256, 9"x43" T-Slotted Table, 24" Longitudinal Table Travel, 12" ...more
Boring Mills, Horizontal, Floor Type
3 Results
5" FPT #Synthesis, CNC floor mill, 4000 RPM, Fidia Heidenhain 430 CNC Control, coolant thru spindle, 50 taper, 2002
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Boring Mills, Horizontal, Floor Type
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Fpt
Model: SYNTHESIS
Year: 2002
Spindle Size 5.062 inches X-Horiz Tvl of Col 236.66 inches Y-Vert Tvl of Head 118.11 inches RPM 4000 CNC Control yes Type of CNC Control Fidia Heidenhain 430 CNC Control Coolant Thru ...more
5" Parpas #Brave, floor type horizontal boring mill, 8k RPM, Heidenhain 530 Control, 40 ATC, CTS, 50 taper, 2006
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Boring Mills, Horizontal, Floor Type
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Parpas
Model: BRAVE
Year: 2006
Spindle Size 5.062 inches X-Horiz Tvl of Col 236.66 inches Y-Vert Tvl of Head 81.5 inches RPM 8000 Z-Spdl Tvl 47 inches CNC Control yes Type of CNC Control Heidenhain 530 CNC Control ...more
FPT #Pragma, CNC floor type horizontal boring mill, 5000 RPM, head changer, floor plate, coolant thru spindle, 2001
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Boring Mills, Horizontal, Floor Type
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Fpt
Model: PRAGMA
Year: 2001
Axis Capability 5-Axis X-Horiz Tvl of Col 240 inches Y-Vert Tvl of Head 80 inches Power 35 horsepower RPM 5000 Z-Spdl Tvl 48 inches CNC Control yes Type of CNC Control Fidia C20 Table Size ...more
Boring Mills, Horizontal, Table Type
2 Results
Lucas #542B-84, horizontal boring mill, table type, recontrolled 1991
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Boring Mills, Horizontal, Table Type
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Lucas
Model: 542B-84
Toshiba Shibaura #BFT-13C (W2), manual horizontal boring mill, 3-Axis digital read out, 1976
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Boring Mills, Horizontal, Table Type
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Toshiba
Model: BFT-13C
Year: 1976
Spindle Size 5.12 inches Table Size 47.2 x 98.4 Inches Spindle Taper MT 6 Milling spindle diameter 8.86 inches Spindle Speeds - Step 27 High Speed Range 230 - 1200 RPM Intermediate Speed ...more
Royal Master #TG12x3, centerless grinder, 3" wheel, hydraulic over wheel dresser, infeed, regulating wheel tachometer, coolant system, 5 HP
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Centerless Grinders
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Royal Master
Model: TG12X3
Capacity SEE BELOW Max. Swing over Bed 36.02" Swing over Cross-Slide 19.09" Main Spindle SEE BELOW Number of spindle speeds Auto. 4 x stepless Range of Spindle Speeds 10 - 1000 RPM Spindle ...more
CNC Bar, Pipe and Tube Benders
1 Result
3" Blm Adige #E-Bender-76, CNC multi-axis tube bender, 57" tube length, 7.87" max.radius, 2004
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Bar, Pipe and Tube Benders
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Blm Adige
Model: E-BENDER-76
Year: 2004
Note on Machine - See Below in s FEED : per discussion in s Section CNC Control yes Type of CNC Control BLM VGP 3D PC Based Control Number of Axes 13 Alpha Numeric Name of Axes X1, Y1, Z1 ...more
Palmary #FCL-18-5, CNC Centerless Grinder, Very Good, 2013
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Centerless Grinders
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Palmary
Model: FCL-18-5
Year: 2013
Standard Grinding Range - Diameter 0.04" - 2.36" Grinding Wheel Size ( OD x W x ID ) 17.9" x 8.1" x 4.4" Motor 15 HP x 4 P Regulating Wheel: - Size (OD x W x ID) 10.0" x 8.1" x 4.4" Speed - ...more
CNC Cylindrical Grinders
3 Results
12.9" x 15.7" Okuma #GP26W, CNC Cylindrical grinder, 24" x10" wheel, 5.9" wheel width, 2016
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Cylindrical Grinders
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Okuma
Model: GP26W
Year: 2016
CNC Control yes Type of CNC Control Mitsubishi CNC Table Size 25" x 16" Max. Workpiece Weight 440 Lbs. X 22 inches Y 15.7 inches Z 13.8 inches Rapid Traverse Rate: X/Y 1890 ipm Rapid ...more
13.8" x 7" Studer #S145, internal grinders, 4-heads, 24K & 120K wheel head, Fanuc 16i-TB, 2000
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Cylindrical Grinders
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Studer
Model: S145
Year: 2000
CNC Control yes Type of CNC Control Fanuc 16i-TB Capabilities and s C-Axis for form & thread grinding / Q-Axis for Swivel of head / 4-Position Internal Grinding Spindles Workpiece ...more
24" x 120" Minakuchi #NWT-300-60F2, CNC Cylindrical (ROLL) Grinder, I.D. spindle, Fanuc O-GC, 30 HP, 1990
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Cylindrical Grinders
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Minakuchi
Model: NWT-300-60F2
Year: 1990
Machine Overall Capacity 24" x 120" Swing 24" Distance Between Centers 120" Max. Swing over Table 19.68" Max. Grinding Diameter 23.62 Max. Work Piece Weight 20000 LBS. Estimate at 20" x ...more
102" x 510" Matteo #AD2600/13000, CNC large lathe, Siemens 840 Control, 2006
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Engine Lathes
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Matteo
Model: AD2600/13000
Year: 2006
CNC Control Siemens 840D Maximum Swing 102.36" Max Swing Over Carriage 88.58" Max Swing Over Cross Saddle Covers 74.80" Distance Between Centers 547.24" Spindle Speeds, 3 - Ranges.8-250 ...more
CNC Horizontal Boring Mills - Floor Type
1 Result
7" Mitsubishi #MAF240/180B, 7.08" diameter spindle, 169" Y-Axis, vertical head travel, 47.24" spindle travel, CAT #50, 1980
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mitsubishi
Model: MAF240/180B
Year: 1980
CNC Control yes Type of CNC Control Gidding & Lewis 8000B CNC Control - Recontrolled 1999 Spindle Diameter 7.08" Milling spindle diameter 9.44" Vertical Head Travel, Y-Axis 169" ...more
CNC Horizontal Boring Mills - Table Type
8 Results
5.1" Toshiba #BP-13B-P7, plain table type CNC horizontal boring mill, 160" x60" table, #50 taper, 1989
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Toshiba
Model: BP-13B-P7
Year: 1989
(1) Used Toshiba Model BP-13B-P7 Plain Table type Horizontal Boring Mill, New 1989, Travels, X-Axis 157", Y-Axis 80", Table Size: 160" x 60", Spindle Dia. 5.1", Spindle Speed 2500 RPM ...more
5.3" Hyundai Wia #KBN-135CL, CNC table type horizontal boring mill, 157.48" X, 98.42" Y, 27.56" Z, Fanuc 31I-A CNC Control, 2013
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Hyundai Wia
Model: KBN-135CL
Year: 2013
Spindle Size 5.31" CNC Control yes Type of CNC Control Fanuc 31I-A CNC Control Vertical Head Travel, Y-Axis 98.42" Table Cross Travel, X-Axis 157.48" Column Infeed, W-Axis 78.74" Spindle ...more
6" Giddings & Lewis #G60-T, CNC table type horizontal boring mill, from Aerospace facility, 1987, recontrolled 2005
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Giddings & Lewis
Model: G60-T
Year: 1987
Milling spindle diameter 6" Table Size 72" x 168" X-Axis Travels: Table 168" W-Axis Travels: Saddle 72" Y-Axis Travels: Headstock 120" Z-Axis Travels: Spindle 48" Spindle Taper No. 50 ...more
Lucas #40T1210, CNC horizontal boring mill, table type, new WFT 13 headstock, 2017
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Lucas
Model: 40T1210
Year: 2017
Lucas #5X10, CNC Table Type Horizontal Boring Mill, 2016
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Lucas
Model: 5X10
Year: 2016
Lucas #WFT13, CNC horizontal boring mill, table type, new 2016
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Lucas
Model: WFT 13
Lucas #WFT13, CNC horizontal boring mill, Table Type, new
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Lucas
Model: WFT 13
Lucas #WFT13R, CNC horizontal boring mill, table type, new 2016
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Lucas
Model: WFT 13R
Clausing #Combi-4000, CNC lathe, Fanuc 210i-T, 21.8" swing x 40" centers, 14" chuck, 2000
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Clausing
Model: COMBI-4000
Year: 2000
CNC Control yes Type of CNC Control Fanuc 21Oi-T control Chuck Size 12 inches Swing 554 millimeters Center Distance 40 inches Spindle Bore.75 inches X Axis Travel 290 millimeters Z Axis ...more
Daewoo Doosan Lynx #200B, CNC Lathe, 18.1" swing, 6" chuck, 2" bar, 4000 RPM, 12 pos. turret, Fanuc 21-TB, parts catcher, chip conveyor, 10 HP, 1998
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Daewoo Doosan
Model: LYNX-200B
Year: 1998
CNC Control yes Type of CNC Control Fanuc Series 21-TB Number of Axes 2 Chuck Size 6" Spindle Nose A2-6 Max. Swing over Bed 18.11" Max. Turning Diameter 11.02" Max. Turning Length 11.81" ...more
Daewoo Doosan Puma #G6, CNC lathe, 1996
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Daewoo Doosan
Model: PUMA-G6
Year: 1996
CNC Control yes Type of CNC Control MItsubishi Medals 500 CNC Control Chuck Size 8 inches Swing 19.7 inches Turning Diameter 15 inches Bar Capacity 1.54 inches Spindle Bore 1.81 inches X ...more
DMC #DL-22LB, CNC turning center, 21.6" swing, 10" chuck, 2.9" bar, Fanuc Oi-TF, 2019
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Dmc
Model: DL-22LB
Year: 2019
CNC Control yes Type of CNC Control Fanuc Oi-TF No. Controlled Axies 2 Chuck Size 10 inches Swing 21.6 inches Turning Diameter 9.84 inches Center Distance 20.87 inches Bar Capacity 2.99 ...more
DMG Gildemeister #CTX-Beta-1250/TC, CNC lathe, Siemens Sinumeric 840D Control, 2012
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Dmg
Model: CTX-BETA-1250/TC
Year: 2012
CNC Control Siemens Sinumeric 840D Tool Holder HSK 63 Spindle 2 5000 RPMs Turning Length 49.21" Spindle Bar Passage 80" Chain Tool Magazine 24 Places Y-Axis Travel 3.93" B - Axis +/- 110 ...more
DMG Mori #NLX-2500SY/700, CNC lathe, 36.4" swing, 10" chuck, 3" bar, Mapps V Control, 2015
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Dmg
Model: NLX-2500SY/-700
Year: 2015
CNC Control yes Type of CNC Control CELOS ERGOLINE TOUCH SCREEN WITH MAPPS V CNC CONTROL Max. Swing over Bed 36.4" Max. Turning Diameter 14.4" Max. Turning Length 27.7" Distance Between ...more
DMG Mori #NLX-2500SY/700, CNC lathe w/milling, 36.4" swing, sub spindle, 10" chuck, 3" bar, Y-Axis, 2012
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Dmg
Model: NLX-2500SY/-700
Year: 2012
CNC Control yes Type of CNC Control MORI M730BM CNC CONTROL Max. Swing over Bed 36.4" Max. Turning Diameter 14.4" Max. Turning Length 27.7" Distance Between Spindles 28.9" Chuck Size 1, 2 ...more
DMG Mori #NLX-2500SY/700, CNC lathe, 36.4" swing, Y-Axis, sub spindle, 10" chuck, 3" bar, 2013
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Dmg
Model: NLX-2500SY/-700
Year: 2013
CNC Control yes Type of CNC Control MORI M730BM CNC CONTROL Max. Swing over Bed 36.4" Max. Turning Diameter 14.4" Max. Turning Length 27.7" Distance Between Spindles 28.9" Chuck Size 1, 2 ...more
Haas #ST-40BB, 25.5" swing, 18" chuck, 4.6" bar, 12 position turret, tailstock, chip conveyor, Haas Control, 2012
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Haas
Model: ST-40BB
Year: 2012
CNC Control yes Type of CNC Control Haas CNC Control No. Controlled Axies 2 Chuck Size 18 inches Swing 25.5 inches Turning Diameter 34.5 inches Center Distance 44.0 inches Bar Capacity 4.62 ...more
Hardinge #GS-150i, CNC Lathe, 18" swing, 3-Jaw 6" chuck, 1.7" bar, tailstock, 2-Axis, 2019
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Hardinge
Model: GS-150I
Year: 2019
CNC Control yes Type of CNC Control Fanuc 0iTF CNC No. Controlled Axies 2 Swing Over Way Covers 18 inches Maximum Machining Diameter 11.1 inches Maximum Turning Length 16 inches Chuck Size ...more
Hwacheon #Cutex-160A, CNC lathe, 21.6" swing, 6" chuck, 1.7" bar, barfeeder, Fanuc 0iTF, 2017
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Hwacheon
Model: CUTEX-160A
Year: 2017
CNC Control yes Type of CNC Control FANUC 0iTF CNC CONTROL Swing 550 mm Machining Length 300 mm Chuck Size 6 inches Swing over bed 21.65 inches Max. Turning Diameter 11.8 inches Max. ...more
Hwacheon #Hi-Tech-450CL-YMC, CNC lathe, 27.5" swing, 15" chuck, Fanuc Oi-TF, chip conveyor, 2015
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Hwacheon
Model: HI-TECH-450CL-YMC
Year: 2015
CNC Control yes Type of CNC Control Fanuc Oi-TF No. Controlled Axies 5 Chuck Size 15 Swing dia. over bed 27.56 Swing over carriage 21.65 Center Distance 54.72 Crosslide Travel 11.02" Y/B ...more
Mazak #Integrex-e650H-S-II, CNC multi-tasking center, Mazatrol Matrix, 32" swing, (2) 24" chuck, 6.6" bar, 120" centers, 2008
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mazak
Model: INTEGREX-E-650H-S-II
Year: 2008
CNC Control yes Type of CNC Control Mazatrol MATRIX Number of Axes 7 Number of Spindles 2 - Horizontally Opposed Chuck Size(s) 24" x 2 Spindle Nose A2-11 Max. Swing 32" Bar Capacity 6.6" ...more
Mazak #Integrex-e650HS-II CNC Multi-Tasking Center, 32" swing, 24" chuck, 6.6" bar, Mazatrol Matrix, 120" Centers, 120 ATC, 10000 RPM on Mill head, 60HP, New 2007
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mazak
Model: INTEGREX-E-650HS-II
CNC Control yes Type of CNC Control Mazatrol MATRIX Number of Axes 7 Number of Spindles 2 - Horizontally Opposed Chuck Size(s) 24" x 2 Spindle Nose A2-11 Max. Swing 32" Bar Capacity 6.6" ...more
Mori Seiki #DuraTurn-2050, CNC turning center, 24" swing, 8" chuck, 20.8" centers, 4000 RPM, tailstock, 12 station turret, Mori MCS-504 Crtl, 18 HP, 2008
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mori Seiki
Model: DURATURN-2050
Year: 2008
CNC Control yes Type of CNC Control Mori Seiki MSX-504 III No. Controlled Axies 2 Swing dia. over bed 14.1 inches Center Distance 20.8 inches Chuck Size 8 inches Spindle Nose A2-6 Spindle ...more
Mori Seiki #DuraTurn-2050, CNC turning center, 24" swing, 8" chuck, 20.8" centers, 4000 RPM, tailstock, 12 station turret, Mori MCS-504 Crtl, 18 HP, 2007
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mori Seiki
Model: DURATURN-2050
Year: 2007
CNC Control yes Type of CNC Control Mori Seiki MSC-504 No. Controlled Axies 2 Swing dia. over bed 14.1 inches Center Distance 20.8 inches Chuck Size 8 inches Spindle Nose A2-6 Spindle Bore ...more
Mori Seiki #ZL-35MC/750, CNC lathe, 23.6" swing, 12" chuck, 4.1" bar, 2000 RPM, Fanuc 16TT, 4-Axis, 2-turrets, tailstock, 30 HP, chip conveyor, coolant system, 1995
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mori Seiki
Model: ZL-35MC/750
Year: 1995
CNC Control yes Type of CNC Control Fanuc 16TT Number of Axes 4 Number of Spindles 1 Chuck Size 12 Inches Spindle Nose A2-8 Max. Swing 23.6 Inches Bar Capacity 4.13 Inches Max. Turning ...more
Okuma #Captain-L370MW, CNC Lathe, Milling & Sub Spindle, OSP-P200L Control, 2007
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Okuma
Model: CAPTAIN-L370MW
Year: 2007
CNC Control yes Type of CNC Control Okuma OSP-P200L Control Number of Axes 3 Number of Spindles 2 Chuck Size Collet Chuck Spindle Nose A2-6 Max. Swing 20.87" Max. Swing over Saddle 16.54" ...more
Okuma #LB-35III/2000C, CNC Turning Center, 28.4" swing, 18" chuck, 78.7" centers, 18.1" turn diameter, 2015
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Okuma
Model: LB-35III/2000C
Year: 2015
Swing 12.99" Distance Between Centers 15.75" Max. Grinding Diameter 7.87" Grinding Wheel 24" x 10" Max. Grinding Wheel Width 5.9" Rapid Traverse Rate X-Axis 1,181 IPM Rapid Traverse Rate ...more
Okuma #LB-45IIIC/2000, Large Capacity CNC Lathe, 35.4" swing, 3-Jaw 24" chuck, 78" centers, 12 position turret, OSP-P300L, 2013
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Okuma
Model: LB-45IIIC/2000
Year: 2013
CNC Control yes Type of CNC Control OSP-P300L Spindle Bore 10.24" Max. Swing over Bed 35.43" Swing over Saddle 21.65" Max. Turning Dia-Upper 25.98" X-Axis Travel 17.32" Z-Axis Travel 81.10" ...more
Okuma #LH55-N, CNC lathe, 36" swing, 36.02" x 78.74", A2-15 Nose, 2-turrets, tailstock, (3) Steady Rest, OSP5000 Control, 1983
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Okuma
Model: LH55-N
Year: 1983
CNC Control yes Max. Swing 28.4" Max. Turning Diameter 18.11" Distance Between Centers 78.74" Spindle Bore 7.1" Spindle Motor 40/30 HP Spindle Speed 1,800 RPMs Spindle Nose A2-15 Turret ...more
Okuma #LU3000EX, CNC lathe, 8" chuck, 16.14" turn diameter, 23.62" turn length, OSP P300L Control, 2013
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Okuma
Model: LU3000EX
Year: 2013
CNC Control yes Type of CNC Control OSP P300L CONTROL Number of Axes 3 Number of Spindles 1 Chuck Size 8" Spindle Nose A2-6 Max. Turning Diameter 16.14" Max. Turning Length 23.62" No. ...more
Okuma #SpaceTurn-LB3000EXII-MC-500, CNC lathe, OSP-P300L, 2013
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Okuma
Model: SPACETURN-LB3000EXII-MC-500
Year: 2013
CNC Control yes CNC Control Okuma OSP-P300L Note: See Below See note on the Tailstock below in s. Machine Cutting Hours 1,950 # Axis 4 Max. Swing over Bed 22.83" Max. Swing over Saddle ...more
Victor #VTurn-A26, CNC lathe, Fanuc 0i-TC, 14.1" swing, 2.9" bar, 10" chuck, 10 sta.turret, 2012
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Victor
Model: VTURN-A26
Year: 2012
CNC Control yes Type of CNC Control Fanuc Series oi - TC Chuck Size 10 inches Swing 31.49 inches Turning Diameter 16.5 inches Center Distance 53.54 inches Bar Capacity 2.95 inches Spindle ...more
320 Ton, Accurpress #732012, CNC press brake, 12' overall, 120" between housing, ETS 3000 Control, 2-Axis Back Gauge, 2006
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Press Brakes
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Accurpress
Model: 732012
Year: 2006
Max Tonnage Capacity 320 Tons Bed and Ram Length 144" Distance Between Housings 120" Approach / Bend Speed Adjustable 19-65 IPM Stroke Length 8" Throat Depth 10" Shut Height -Ram Up Stroke ...more
CNC Rotary Tables and Indexers
1 Result
48" Giddings & Lewis, CNC C-Axis rotary table with riser, 40" table height, 1993, updated 2005
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Rotary Tables and Indexers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Giddings & Lewis
Year: 1993
Table Size 48 Inches Work Height 40 Inches (Approximate) Number of T-Slots 6 Width of T-Slots, Bottom 1.5 Inches - Approximate Depth of T-Slot, Overall 1.75 Inches - Approximate Distance ...more
CNC Vertical Boring Mills – including VTLs
2 Results
71" Olympia #V60L, CNC vertical turret lathe, 60" table, 450 RPM, ATC, 80 HP, Fanuc 18i-T, 2002
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Vertical Boring Mills – includin...
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Olympia
Model: V60L
Year: 2002
CNC Control yes Type of CNC Control Fanuc 18i-T CNC Control Max. Swing Diameter 71" Max. Turing Diameter 71" Table Diameter 60" Maximum Machining Height (w/tool) 50" Table Top to Ram Bottom ...more
Okuma #Millac-33T, CNC Vertical Lathe, 2013
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: CNC Vertical Boring Mills – includin...
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Okuma
Model: MILLAC-33T
Year: 2013
Coordinate Measuring Machines (CMM)
2 Results
Moore #M-48Z, Univ coordinate measuring machine, 48" x 24" table, 5" quill, 24" X, 20" Z, Heidenhain digital read out, 1980
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Coordinate Measuring Machines (CMM)
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Moore
Model: M-48Z
Year: 1980
Table Size 48 x 24 inches X 48 inches Y 24 inches 4-spindle speeds 4, 2, 1, 0.5 RPM Spindle housing vertical travel 10 in. (250mm) Quill Vertical Travel 5 in. (127mm) Total Vertical Travel ...more
OGP #Smartscope-Specialist-300, Non-Contact coordinate measuring machine, Touch probe, 2010
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Coordinate Measuring Machines (CMM)
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Ogp
Model: SMARTSCOPE-SPECIALIST-300
Year: 2010
OGP Smartscope Specialist 300 Non Contact CMM, Manufacturer: OGP, Model: Specialist 300, S/N:, Year: 2010, Smartscope Specialist 300, Multi Sensor, Touch probe, TelStar telecentric ...more
Giddings & Lewis Exactamatic #HC, drill point grinder, good condition, 1981
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Drill Grinders
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Giddings & Lewis
Model: HC
Year: 1981
Helical 1/16" to 1-1/2" (1.55 to 38.0 mm) Wide-Web Helical 1/16" to 1-1/2" (1.55 to 38.0 mm) Bickford* 1/8" to 1" (3.0 to 25.4 mm) - *Requires two operations to achieve geometry Racon 1/8" ...more
13" x 40" Bridgeport #Romi-13-5, engine lathe, 2500 RPM, 1-3/8" Hole, inch/metric thread
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Engine Lathes
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Bridgeport
Model: ROMI-13-5
Dimensions 76" x 30" x 51" Weight 2000 pounds :, Swing Over Ways: 13", Swing Over Cross Slide: 7.5", Distance Between Centers: 40", Number of Spindle Speeds: 12, Range of Spindle Speeds: 80 ...more
Gantry Type Machining Center
3 Results
Fidia #GT2514/6, CNC gantry mill, 24 automatic tool changer, 236" X Travel, 98" Y Travel, 55" Z, 24k RPM, HSK 63A taper, Fidia C20 5-Axis Control, 2007
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Gantry Type Machining Center
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Fidia
Model: GT2514/6
Year: 2007
CNC Control yes Type of CNC Control Fidia C20 Table Size 98" x 275" Table Weight Capacity Unlimited Due to Foundational Floor Mount X-Axis Travel 236 Inches Y-Axis Travel 98 Inches Z-Axis ...more
Okuma #MCR-B-III-30/50 5-Face, CNC double column, 72 automatic tool changer, 8000 RPM, BT50, OSP-P300M, 2013
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Gantry Type Machining Center
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Okuma
Model: MCR-B-III-30/50
Year: 2013
Number of Axes 4 CNC Control yes Type of CNC Control OSP-P300M Table Size 200.78" x 82.76" Max Table Load 40,000 Lbs. Effective Width Between Colums 120.08" X 188.97 inches Y 145.66 inches ...more
Okuma #MCR-B-III30/50 5-Face, CNC double column, 72 automatic tool changer, 188.97" X Travel, 145.66" Y Travel, 31.5" Z, 8000 RPM, BT50, OSP-P300M Control, 2012
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Gantry Type Machining Center
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Okuma
Model: MCR-B-III30/50
Year: 2012
Number of Axes 4 CNC Control yes Type of CNC Control OSP-P200MA Table Size 200.78" x 82.76" Max Table Load 66,000 Lbs. Effective Width Between Colums 120.08" X 188.97 inches Y 145.66 inches ...more
Horizontal CNC Machining Centers
14 Results
Daewoo Doosan #HM1250, CNC 4-Axis horizontal machining center, 2013
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Daewoo Doosan
Model: HM1250
Year: 2013
CNC Control yes Type of CNC Control FANUC 31i-A CNC CONTROL # Axis 3 Pallet Size 49.2" X 49.2" Pallet-W 49.2 inches Pallet-L 49.2 inches X 82.69 inches Y 59 inches Z 59 inches MAXIMUM ...more
DMG #DMC-60FD-duoBlack, CNC 5-Axis horizontal machining center, Siemens Control, 630mm Rotary Table, automatic tool changer, Chip Conveyor, 2011
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Dmg
Model: DMC-60FD-DUOBLACK
Year: 2011
CNC Control yes Type of CNC Control Siemens Pallet Size 630 mm X 600 millimeters Y 700 millimeters Z 600 millimeters Table Turning Speed 40 RPM Control: Siemens, ATC, Chip Conveyor, Touch ...more
DMG Mori #NHX-4000, CNC horizontal machining center, 40 automatic tool changer, 22" X, 22" Y, 26" Z, 15000 RPM, Celos M730UM Control, coolant thru spindle, chip conveyor, 2016
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Dmg
Model: NHX-4000
Year: 2016
CNC Control yes Type of CNC Control Celos ERGOline Touch Controller # Axis 4 Pallet Size 15.7" x 15.7" Pallet-W 15.7 inches Pallet-L 15.7 inches X 22 inches Y 22 inches Z 26 inches Pallet ...more
DMG Mori-Seiki #NHX-4000, CNC horizontal machining center, 120 automatic tool changer, 22" X, 22" Y, 26" Z, 15000 RPM, CT40, coolant thru spindle, Celos M730UM Control, 2016
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Dmg
Model: NHX-4000
Year: 2016
CNC Control yes Type of CNC Control CELOS M730UM CNTRL # Axis 4 Pallet Size 15.7" x 15.7" Pallet-W 15.7 inches Pallet-L 15.7 inches X 22 inches Y 22 inches Z 26 inches Pallet Capacity 882 ...more
DMG Mori #NHX-4000, CNC horizontal machining center, 15000 RPM, HSK63 taper, 15.7" x 15.7" pallets, 2017
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Dmg
Model: NHX-4000
Year: 2017
CNC Control yes Type of CNC Control Celos ERGOline Touch Controller # Axis 4 Pallet Size 15.7" x 15.7" P Pallet-W 15.7 Pallet-L 15.7 X 22 Y 22 Z 26 Pallet Indexing (B-Axis) 4th Axis X-Axis ...more
DMG Mori #NHX-5000 CPP Gen2, CNC horizontal machining center, 240" ATC28.7" 28.7" Y, 34.6" Z, 20000 RPM, 2017
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Dmg
Model: NHX-5000
Year: 2017
CNC Control yes Type of CNC Control Celos Control (M-730UM) Pallet Size 19.7" x 19.7" Pallet-W 19.7 inches Pallet-L 19.7 inches Pallet Capacity 1100 pounds X 28.7 inches Y 28.7 inches Z ...more
Mori-Seiki #NH-4000DCG, CNC horizontal machining center, 60 automatic tool changer, 22" X, 22" Y, 24.8" Z, 14000 RPM, CAT 40, 30 HP, coolant thru spindle, Fanuc MSX 701 IV, 2010
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mori Seiki
Model: NH-4000DCG
Year: 2010
CNC Control yes Type of CNC Control MORI-SEIKI / FANUC MODEL: MSX 701 IV # Axis 3 Number of Pallets 2 Pallet Size 15.7" X 15.7" (400MM) Pallet-W 15.7 inches Pallet-L 15.7 inches X 22 inches ...more
Mori Seiki #NH-6300/50 FMS, 60 automatic tool changer, 35.4" X, 31.5" Y, 38.6" Z, 10000 RPM, MSX-501 III Control, 2007
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mori Seiki
Model: NH-6300/50
Year: 2007
CNC Control yes Type of CNC Control MSX-501 III CNC Control Pallet Size 24.8" x 24.8" MAX WORKPIECE SWING DIAMETER: 39.4" MAX WORKPIECE HEIGHT: 51.2" Pallet-W 24.8 inches Pallet-L 24.8 ...more
Mori Seiki #NH-6300DCG-II, MSX-701 Control, 4-Axis, 41" X, 35" Y, 38" Z, 8000 RPM, Cat 50, coolant thru spindle, 2011
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mori Seiki
Model: NH-6300DCG-II
Year: 2011
CNC Control yes Type of CNC Control MSX 701IV CNC CONTROL / FANUC 31I - MAPPS IV # Axis 4 Pallet Size 24.8 x 24.8 Number of Pallets in Pallet Pool 2 X 41.3 inches Y 35.4 inches Z 38.6 ...more
Mori Seiki #NH-6300DCG-II, MSX-701 Control, 4-Axis, 41" X, 35" Y, 38" Z, 8000 RPM, Cat 50, coolant thru spindle, 2011
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mori Seiki
Model: NH-6300DCG-II
Year: 2011
CNC Control yes Type of CNC Control MSX 701IV CNC CONTROL / FANUC 31I - MAPPS IV # Axis 4 Pallet Size 24.8 x 24.8 Number of Pallets in Pallet Pool 2 X 41.3 inches Y 35.4 inches Z 38.6 ...more
Mori-Seiki #NH-6300DCG-II, 24.8" x 24.8" pallet, 1 deg., MSX701 CNC Control, 41.3"X, 35.4"Y, 38.6"Z, 120 ATC, 8000 RPM, CAT 50, 10 Pallet Pool, 50 HP, 8000 RPM, 2011
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mori Seiki
Model: NH-6300DCG-II
Year: 2011
SPECIAL NOTE: WITH RELEASE DATE TO BE DETERMINED CNC Control yes Type of CNC Control MSX 701IV CNC CONTROL / FANUC 31I - MAPPS IV # Axis 4 Pallet Size 24.8 x 24.8 Number of Pallets in ...more
Mori-Seiki #NHX-4000, 22" X, 22" Y, 26" Z, 60 automatic tool changer, 12000 RPM, 15.7" x15.7" pallets, Cat 40, 2011, #52945
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mori Seiki
Model: NHX-4000
Year: 2011
(1) Used Mori Seiki Model NHX 4000 CNC Horizontal Machining Center, New 2011, Pallet Size / Number of Pallets: 15.7" x 15.7" / 2 pallets, Table Indexing:.001 Degree Rotary, Table Load ...more
NTC #ZH-4000, Fanuc 32i, 4th Axis, 22" X, 22" Y, 20" Z, 40 automatic tool changer, 12000 RPM
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Ntc
Model: ZH-4000
(1) Used NTC-ZH 4000 4th Axis CNC Horizontal Machining Center, New 2007, Table Size 15.75″ x 15.75″, Table Load Capacity 550lbs, Table Index Full 4th Axis, Max Work Piece Swing ...more
Tong-Tai #SH-4000P, CNC horizontal machining center, 60 automatic tool changer, 24.8" X, 24.8" Y, 24.8" Z, 15000 RPM, Fanuc Oi-MF, 2017
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Tong-Tai
Model: SH-4000P
Year: 2017
CNC Control yes Type of CNC Control FANUC Oi-MF CNC CONTROL # Axis 4 Pallet Size 15.74 Pallet-W 15.74 inches Pallet-L 15.74 inches X 24.80 inches Y 24.80 inches Z 24.80 inches Pallet ...more
Laboratory and Research Equipment
2 Results
Microscope, Keyence #VHX-1000E, Digital Microscope, 20x-200x Ultra-small zoom lens
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Laboratory and Research Equipment
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Keyence
Model: MICROSCOPE
CNC Control no Keyence VHX-1000E VHX-1100 Multi Scan Digital Microscope VH-20R 20x - 200x Ultra-small Compact high-performance zoom lens VHX-S50F Free-angle Stand Controller Unit / Mouse / ...more
Microscope, Keyence #VW5000E Motion Analyzer Microscope
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Laboratory and Research Equipment
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Keyence
Model: MICROSCOPE
Keyence VW5000E Motion Analyzer Microscope Keyence VH-Z50L ( x50-x500) Keyence Color Keyence Macro Zoom System, Long Distance VW-Z2, Come with all Accessories to Function, Comes in a 1630 ...more
Marking Machines (Including Laser Markers)
1 Result
CLC Aeromark #ProWriter-F50, CNC fiber optic laser marking machine, 50 watt, 2020
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Clc Aeromark
Model: PROWRITER-F50
Year: 2020
Type of Laser Fiber Optic CLASS OF LASER CLASS 4 LASER Overview The ProWriter TM F50 is a -purpose industrial marking system. It is designed to permanently mark a variety of materials ...more
Miscellaneous Testing Equipment
1 Result
Taylor-Hobson Precision #Taly-Surf CCI Light ( M112-3993-03), Scanning Z ( CCI light / Luna / sunstar), 2011
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Miscellaneous Testing Equipment
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Taylor-Hobson
Model: TALY-SURF
Year: 2011
Taylor Hobson Precision Taly Surf CCI Light ( M112-3993-03) Scanning Z ( CCI light / Luna / sunstar) Year 2011 WE will need to ship in a crate so it will be added charge for shipping Our ...more
.157" x 8-7/8" x 8-7/8" Boschert #LB12PN4, hydraulic notching machine, 1989
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Notching Machines
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Boschert
Model: LB12PN4
Year: 1989
Capacity, Mild Steel 8.875" x 8.875" x.157" Capacity, Mild Steel 225mm x 225mm x 4mm Capacity, Stainless Steel 8.875" x 8.875" x.188" Table Width 35.4" 900mm Table Height 35.4" 900mm ...more
Amada #Togu-III, punch & die grinder, very good, 2012
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Punch and Die Grinders
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Amada
Model: TOGU-III
Year: 2012
Max. Tool Diameter 6.30" Maximum grinding amount 0.039" Min/Max tool diameter (type E, 4.5" die) 0.059"/6.299 Tool height (type E shear angled punch) 5.906" Standard grinding wheel dia. ...more
Amada #Togu-III, punch & die grinder, 6.3" tool diameter, 0.039" grinding amount, 3000 RPM, 2007
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Punch and Die Grinders
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Amada
Model: TOGU-III
Year: 2007
Max. Tool Diameter 6.30" Maximum grinding amount 0.039" Min/Max tool diameter (type E, 4.5" die) 0.059"/6.299 Tool height (type E shear angled punch) 5.906" Standard grinding wheel dia. ...more
Reciprocating Surface Grinders - Horizontal Spindle
2 Results
6" x 12" Mitsui #MSG-200H1H High-Tec, hydraulic automatic surface grinder, automatic incremental downfeed, 1993
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mitsui
Model: MSG-200H1H
Year: 1993
Incremental Downfeed yes Table Size 6x13-1/2" Table Movement 8x15" Max. Height 18" Table (L/F) Movement per Tev. of Hand Wheel 3-1/3"/rev. Table (L/F) Speed Infinately Variable ...more
12" x 28" Clausing Equiptool #CSG3A1228, hydraulic precision surface grinder, 2000
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Clausing
Model: CSG3A1228
Year: 2000
Incremental Downfeed no Table Size 12" x 28" Standard Magnetic Chuck Size 11.81" x 27.56" Max. Grinding Length 28" Max. Grinding Width 13" Max. distance from table surface to spindle ...more
Screw Type Injection Molding Machine
1 Result
9 Ton, .4 oz., MCP #12/90-HSE, Plastic Injection Molder, PLC Control, 2007
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Screw Type Injection Molding Machine
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mcp
Model: 12/90-HSE
Year: 2007
Capacity - Tonnage 9 Ton Shot Size 12 grams (.4 oz.) Tie Bar Spacing 4-1/2" Horizontal Platen Size: 5-3/8" x 7" Voltage / Power requirement 400 Volts - 3 Phase Machine Weight 616 Lbs. MCP ...more
Straight Side Double Crank (Single Action) Press Machines
1 Result
200 Ton, Minster #E2-200-72-42, Hevistamper straight side double crank, 8" stroke, 26" Shut Height, 90 SPM, 1980
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Minster
Model: E2-200-72-42
Year: 1980
Shut Height to Bed 26" (SDAU) Speed 0 - 90 SPM RAM ADJUSTMENT: 6" MOTORIZED ADJUSTMENT BED AREA: 72" X 42" (RL X FB) RAM AREA: 72" X 42" (RL X FB) T-SLOTTED BOLSTER SIZE: 72" X 42" (RL X ...more
36" x 120" Butler #36X120, CNC (Landing Gear) Strut Grinder, Fanuc Oi-TD, 4-Jaw chuck, coolant, tailstock, 1998, Rebuild 2011
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Strut Grinders
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Butler
Model: 36X120
Year: 1998
CNC Control yes Type of CNC Control Fanuc Oi-TD Maximum Turning Diameter 36 Inches Maximum Overall Capacity 30" x 120" Maximum Swing 36" Swing in Gap 60" Approximate ( Possibly 72") Maximum ...more
Swiss Type and Lathe CNC Automatic Screw Machines
4 Results
Citizen #M32VIII, CNC Swiss Lathe, 32mm, 8000 RPM, 8-Axis, Mitsubishi M Control, HP coolant, CAV magnetic barfeed, 2006
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Citizen
Model: M32VIII
Year: 2006
CONTROL Mitsubishi M Series Control Max. machining length (L) 320mm/1 chucking Spindle through-hole diameter 36mm diam. Main Spindle Speed: 8000 rpm Spindle speed of the gang rotary tool ...more
Ganesh #Cyclone-32CS, CNC Swiss type lathe, 1.25" bar capacity 7 Axis, 6000 RPM, Ganesh 900T, Edge Patriot 338 Barfeed, 2013
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Ganesh
Model: CYCLONE-32CS
Year: 2013
CONTROL Ganesh 900T Multi-Tasking Control Capacity 1.25" (32mm) Standard No of Axes: 7 Axes Name Designations: X, X2, Y, Z, Z2, C, C2 Main Spindle See Below Maximum RPM / spindle bearing ...more
Star #SR-20J, type N CNC Swiss type automatic lathe, Fanuc 31i-B, Iemca Ideal 325 barfeed, 2014
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Star
Model: SR-20J
Year: 2014
CONTROL Fanuc Series 31i-B Max. Machining Diameter 20mm Max. headstock Stroke - Standard 205mm (8in) Max. headstock Stroke - Standard (N-Type) Bar diameter x 2.5 Max headstock stroke - with ...more
Star #SR-20J, type N CNC Swiss type automatic lathe, Fanuc 31i-B, Iemca Ideal 325 barfeed, high pressure coolant, 2014
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Star
Model: SR-20J
Year: 2014
CONTROL Fanuc Series 31i-B Max. Machining Diameter 20mm Max. headstock Stroke - Standard 205mm (8in) Max. headstock Stroke - Standard (N-Type) Bar diameter x 2.5 Max headstock stroke - with ...more
Vertical CNC Machining Centers
13 Results
Daewoo Doosan #DNM-4500S, CNC vertical machining center, 40 automatic tool changer, 31.5" X, 17.7" Y, 20.1" Z, 15000 RPM, CT40, Fanuc i, 4th/5th Axis KOMA TWA160 Rotary Table, 2019
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Daewoo Doosan
Model: DNM-4500S
Year: 2019
Table-W 39.4" Table-L 17.7" Weight 11000 pounds Dimensions 110" x 80" x 118" CNC Control yes Type of CNC Control Fanuc i Series Doosan X 31.5 inches Y 17.7 inches Z 20.1 inches # ATC 40 Max ...more
Daewoo Doosan #VC-630/5AX, 81 automatic tool changer, 25.5" X, 30" Y, 20.4" Z, 12000 RPM, Heidenhain iTNC 640, 2011
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Daewoo Doosan
Model: VC-630/5AX
Year: 2011
CNC Control yes Type of CNC Control Heidenhain iTNC 640 # Axis 5 X 650 millimeters Y 765 millimeters Z 520 millimeters A-Axis Trunnion Tilt Range - + or - 30 to 120 C-Axis Table Rotation ...more
Deckel Maho #HSC-75 Linear, 60 automatic tool changer, 29.5" X, 23.6" Y, 19.6" Z, 28000 RPM, Heidenhain iTNC 530 Control, coolant thru spindle, coolant, chip conveyor, 2014
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Deckel
Model: HSC-75
Year: 2014
CNC Control yes Type of CNC Control Heidenhain iTNC 530 # Axis 3 Table Size 750mm x 750mm Table Capacity 800 grams X-Axis Travel 750 millimeters Y-Axis Travel 600 millimeters Z-Axis Travel ...more
Femco #VMC-21100, CNC vertical machining center, 30 automatic tool changer, 84" X, 39" Y, 31" Z, 6000 RPM, CAT 50, 25 HP, Fanuc 16-M, 2005
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Femco
Model: VMC-21100
Year: 2005
CNC Control yes Type of CNC Control Fanuc 18-M # Axis 4 Table Size 94.48" x 39.99" Table Capacity 6600 pounds X-Axis Travel 84 inches Y-Axis Travel 39 inches Z-Axis Travel 31 inches Spindle ...more
Haas #VF-3VOP-D, CNC vertical machining center, 24 automatic tool changer, 40" X, 26" Y, 26" Z, 8100 RPM, 40 Taper, Haas Control, Probing, extended travel, chip conveyor, coolant thru spindle, 20 HP, 2005
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Haas
Model: VF-3VOP-D
Year: 2005
CNC Control yes Type of CNC Control Haas CNC Control # Axis 3 Table Size 54" x 24" X-Axis Travel 40 inches Y-Axis Travel 26 inches Z-Axis Travel 26 inches Spindle Speed 7500 RPM Spindle ...more
Hamai #MC-5VA, vertical machining center, 24 automatic tool changer, 41" X, 22" Y, 20" Z, 4000 RPM, 50 taper, 47" x23" tbl, Fanuc OM (2 available)
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Hamai
Model: MC-5VA
CNC Control yes Type of CNC Control Fanuc OM # Axis 4 Table Size 47" x 23" Table Capacity 4400 pounds X-Axis Travel 41 inches Y-Axis Travel 22 inches Z-Axis Travel 20 inches Spindle Speed ...more
Hermle #C42, 5-Axis CNC vertical machining center, 31.4" X, 31.4" Y, 21.6" Z, 18000 RPM, Heidenhain TNC 640 Control
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Hermle
Model: C42
CNC Control yes Type of CNC Control CNC ( Heidenhain TNC 640 CNC Control ) # Axis 5 X 31.49 inches Y 31.49 inches Z 21.65 inches Spindle Speeds 18000 RPM Spindle Taper HSK-A63 Table Swivel ...more
Kao Ming #KMC-318HIS, 30 automatic tool changer, 127" X, 66.9" Y, 33.4" Z, 10000 RPM, CT50, Fanuc 32i-B, 2013
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Kao Ming
Model: KMC-318HIS
Year: 2013
CNC Control yes Type of CNC Control Fanuc 32i-B Table Size 118" x 64.96" Table Weight Capacity 22,000 Lbs. X-Axis Travel 127" Y-Axis Travel 66.929" Z-Axis Travel 33.46" Spindle Ranges ...more
Mazak #Vortex-i800V/8, 5-Axis CNC vertical machining center, 43 automatic tool changer, 66" X, 59" Y, 45" Z, 10000 RPM, Mazatrol SmoothX Control, coolant thru spindle, 2016
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mazak
Model: VORTEX-I800V/8
Year: 2016
CNC Control yes Type of CNC Control Mazatrol SmoothX # Axis 5 Table Size 31" x 31" X-Axis Travel 66 inches Y-Axis Travel 59 inches Z-Axis Travel 45 inches Spindle Speed 10000.00 Spindle ...more
OKK #VP-600, CNC vertical machining center, 40 automatic tool changer, 44" X, 24" Y, 18.1" Z, 20000 RPM, CT40, dual pallet, coolant thru spindle, 2010
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Okk
Model: VP-600
Year: 2010
Coolant Thru Spindle yes Max Spindle Speed For Tapping (RPM) 20000 CNC Control yes Type of CNC Control Neomatic 635 V (Mitsubishi) # Axis 3 Table Size 51.18" x 24.02 X-Axis Travel 44.09 ...more
YCM #MV106A, CNC vertical machining center, 24 automatic tool changer, 43.3" X, 23.6" Y, 24.8" Z, 8000 RPM, CAT 40,15 HP, Fanuc 18Mi, 2005
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Ycm
Model: MV106A
Year: 2005
Type of CNC Control Fanuc 18Mi Table Size 47.24" x 23.62" X-Axis Travel 43.30 inches Y-Axis Travel 23.6 inches Z-Axis Travel 24.80 inches Max Weight On Table 4400 Lbs. Spindle Speed 8000 ...more
YCM #MV106A, CNC vertical machining center, 40" X, 23.6" Y, 23.6" Z, 8000 RPM, CAT 40, Fanuc MXP 100i, 2006
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Ycm
Model: MV106A
Year: 2006
CNC Control yes Type of CNC Control Fanuc MXP 100i Table Size 40" x 20" X-Axis Travel 40 inches Y-Axis Travel 23.6 inches Z-Axis Travel 23.6 inches Spindle Speed 8000 RPMs Spindle Taper Cat ...more
YCM #NDV102A, CNC vertical machining center, 30 automatic tool changer, 40" X, 23.6" Y, 23.6" Z, 15000 RPM, CAT40, Fanuc MXP200FB, 2011
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Ycm
Model: NDV102A
Year: 2011
CNC Control yes Type of CNC Control YCM Fanuc MXP-200FB # Axis 3 Table Size 44.09 x 25.59 Table Capacity 2200 pounds X-Axis Travel 40.15 inches Y-Axis Travel 23.62 inches Z-Axis Travel ...more
Nagel #ECO40-2, cnc twin spindle vertical honing mach, 3-40mm bore, 400mm stroke, 2012
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical Hones
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Nagel
Model: ECO40-2
Year: 2012
CNC Control yes Type of CNC Control Allen Bradley Panel View Plus 1500 Bore Size 3 -40 mm Bore Depth 200mm Max Part Height 1000mm Spindle Speeds 100 - 1700 RPM Number of Spindles (2) Two ...more
Ohio Tool Works #V-10-12-1, CNC single spindle hone, 12" stroke, 8" OD, 0.25"-6" ID, 10 -3500 RPM, 2017
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Vertical Hones
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Ohio
Model: V-10-12-1
Year: 2017
Spindle Speeds 10 - 3500 RPM Inf. Variable Stroke Rate 5 - 90 FPM Inf. Variable Electrial System 480 Volt/3 PH/60 Hz CNC Control yes Type of CNC Control OTW PLC Controller I.D. Capacity ...more
Wire EDM Machine
1 Result
Fanuc #Robocut-Alpha-1iC/SAWF, CNC Wire Electrical Discharge Machine, Fanuc 18Ois-WB Control, 2007
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Wire EDM Machine
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Fanuc
Model: ROBOCUT-ALPHA-1IC/SAWF
Year: 2007
Maximum Workpiece Dimensons 43 x 32 x 12 Max. Workpiece Weight 3,350 lbs. Table Dimensions 21.6 x 14.6 x 12.1 Travels on Axes 5 X Axis Travel 21.6" Y Axis Travel 14.6" Z Axis Travel 12.1" ...more